Carburettor gaskets.
Carburettor gaskets.
I may have been out of commission of late but I haven't entirely neglected the cause!
Firstly, the Solex Z10 "anti warp" kit is now available from Webcon, but they are unable to supply a precise match for the gasket needed to go between the new green block and the manifold.
I have now remanufactured these.
Available from me for £2.50 + postage.
Secondly, I am now able to supply all three variants of the carb top to body gaskets for the Weber 32DIR.
For the Types 57 & 83
For the Types 93, 104 & 109
And the modified version for Types 93,104 & 109 to reduce float chamber vapour.
Available from me for £3.00 + postage. (any of the versions).
I am currently working on a supply of insulating plates (thick and thin) and base gaskets for the 32DIR and will report when I have news.
Mac.
Firstly, the Solex Z10 "anti warp" kit is now available from Webcon, but they are unable to supply a precise match for the gasket needed to go between the new green block and the manifold.
I have now remanufactured these.
Available from me for £2.50 + postage.
Secondly, I am now able to supply all three variants of the carb top to body gaskets for the Weber 32DIR.
For the Types 57 & 83
For the Types 93, 104 & 109
And the modified version for Types 93,104 & 109 to reduce float chamber vapour.
Available from me for £3.00 + postage. (any of the versions).
I am currently working on a supply of insulating plates (thick and thin) and base gaskets for the 32DIR and will report when I have news.
Mac.
88 5door Redline 1.7 52k - 19 XC60 Momentum Pro D4 AWD 17k
1950 pair of legs that don't work very well.
1950 pair of legs that don't work very well.
-
- *** V3M DONOR ***
- Posts: 5461
- Joined: 25 Apr 2005 06:52 pm
- Location: Anglesey North Wales
- Contact:
Re: Carburettor gaskets.
Looks very tasty
Dai
Please email me directly on dai@classicswede.co.uk
http://www.classicswede.com
phone/text 07824887160
Web shop http://www.classicswede.co.uk/
Please email me directly on dai@classicswede.co.uk
http://www.classicswede.com
phone/text 07824887160
Web shop http://www.classicswede.co.uk/
-
- Posts: 3283
- Joined: 09 Feb 2008 02:29 am
Re: Carburettor gaskets.
^^^^^ Is that the one for those that can't be arsed to get the scissors out on this :mac wrote:And the modified version for Types 93,104 & 109 to reduce float chamber vapour.
mac wrote:For the Types 93, 104 & 109
Re: Carburettor gaskets.
Quite correct!
And for only £10.00 I'll send out a paper drawing so you can make the lot out of a cornflake packet! I suppose it's my mistake not to charge more for the modified one - after all as has been pointed out there's more cutting involved.
Mac.
And for only £10.00 I'll send out a paper drawing so you can make the lot out of a cornflake packet! I suppose it's my mistake not to charge more for the modified one - after all as has been pointed out there's more cutting involved.
Mac.
88 5door Redline 1.7 52k - 19 XC60 Momentum Pro D4 AWD 17k
1950 pair of legs that don't work very well.
1950 pair of legs that don't work very well.
-
- *** V3M DONOR ***
- Posts: 3657
- Joined: 31 Mar 2005 09:01 pm
- Location: Shropshire & Swansea, UK
- Contact:
Re: Carburettor gaskets.
These look great Mac...
Adam
Adam
F559 LFE - 340R 2.0 16v
C208 CTR - 340 1.8 16v
D300 LBO - 360 GLT 3 Door Turbo project!! (and restoration)
F706 RBX - 350R in process!!!
C208 CTR - 340 1.8 16v
D300 LBO - 360 GLT 3 Door Turbo project!! (and restoration)
F706 RBX - 350R in process!!!
-
- *** V3M DONOR ***
- Posts: 1204
- Joined: 27 Jul 2004 11:36 pm
- Location: Belper, Derbyshire UK
- Contact:
Re: Carburettor gaskets.
Sorry, you can't do that.mac wrote: I suppose it's my mistake not to charge more for the modified one - after all as has been pointed out there's more cutting involved.
There's less material involved so it has to be cheaper........
Terms and conditions apply. This post may go down as well as up. Regulated by the Financial Services Authority. Hard hats to be worn. No reversing without a banksman. No admittance to unauthorized persons. Stop that. Put that down. Leave that alone.
-
- Posts: 3283
- Joined: 09 Feb 2008 02:29 am
Re: Carburettor gaskets.
^^^^ WHS. Must be 37.3482% less gasket in that one.
-
- Posts: 641
- Joined: 09 Aug 2005 02:24 pm
- Location: Antwerp, Belgium
Re: Carburettor gaskets.
I can't wait to add them to the BBB range! Excellent job Mac!
RJ
RJ
Life is a journey, so sit back and enjoy the ride!
Born Built Beauties: Parts keeping our cars on the road!
http://www.Born-Built-Beauties.eu
Born Built Beauties: Parts keeping our cars on the road!
http://www.Born-Built-Beauties.eu
Re: Carburettor gaskets.
Looks good!! If i read this before.... I cut some gaskets but your looks
Jejej the next time i takl to you first!!
Jejej the next time i takl to you first!!
Re: Carburettor gaskets.
Just a quick note - looking at the gaskets you have made they look very like the one that fits between the original block and the carb (with the "green" block you use the rubber/shim supplied and don't need a further gasket).
The gasket you need to go between the new block and the manifold (or to use with the thin plate in the original set up) is different! The bolt holes and centre opening are the same of course BUT the extra "spigot pin" holes are differently placed.
(it will be obvious when the kit arrives and you can trial fit your gaskets).
It's quite all right to make your own gasket, but if you have a problem PM me your name and address and I'd be happy to pop you one in the post.
Mac.
The gasket you need to go between the new block and the manifold (or to use with the thin plate in the original set up) is different! The bolt holes and centre opening are the same of course BUT the extra "spigot pin" holes are differently placed.
(it will be obvious when the kit arrives and you can trial fit your gaskets).
It's quite all right to make your own gasket, but if you have a problem PM me your name and address and I'd be happy to pop you one in the post.
Mac.
88 5door Redline 1.7 52k - 19 XC60 Momentum Pro D4 AWD 17k
1950 pair of legs that don't work very well.
1950 pair of legs that don't work very well.
Re: Carburettor gaskets.
Yes, i copy the black block top, when arrive green i do other. Thanks for the info!
Re: Carburettor gaskets.
You can copy from the lower thin plate (with a gasket bonded on both sides) you won't reuse it but bottom of the green block has the same shape and spigot configuration.
Best of luck - Mac.
Best of luck - Mac.
88 5door Redline 1.7 52k - 19 XC60 Momentum Pro D4 AWD 17k
1950 pair of legs that don't work very well.
1950 pair of legs that don't work very well.