Page 1 of 1

Dip stick tube removal

Posted: 06 Aug 2013 11:12 am
by kelvingenders
Hi all, I've got oil leaking from the bottom of the dipstick tube...where it connects to engine sump. Is it easy to remove. Do you need a special tool, or does it unscrew. Is a leak from this common or have I got a wrong diagnosis on the B200 redblock
Kelvin :360: ....

Re: Dip stick tube removal

Posted: 06 Aug 2013 11:31 am
by Logan360
Has a small O ring on bottom of tube. Has one single 10mm bolt somewhere up the tube off a bracket. undo that, pull tube out fit new O ring should be golden.

Re: Dip stick tube removal

Posted: 06 Aug 2013 11:36 am
by kelvingenders
Always a pleasue logan :360:

Re: Dip stick tube removal

Posted: 06 Aug 2013 12:50 pm
by Logan360
No prob. was pulling something out of my parts car and that ended up coming out so i examined it. turns out i remembered lol

Re: Dip stick tube removal

Posted: 07 Aug 2013 07:47 am
by kelvingenders
Turns out there was no o ring!!. Probably part of the problem.....have put 10 mm x 2.65 mm one on.... Hopefully this sorts the leak