Dogdish flywheel part number/help

B14, B172, B19/200, D16 engine, ignition, cooling, fuel & exhaust system, gearbox, variomatic, final drive... | Tuning: engine swaps, welded diff, clutch upgrades...
NO parts requests here, please use our V3M BUY & SELL corner
Post Reply
User avatar
valman
Posts: 663
Joined: 07 Feb 2010 11:16 pm
Location: Bedfordshire

Dogdish flywheel part number/help

Post by valman » 12 Aug 2013 12:24 pm

Hi guys tried to search but not much use - anyone know the part number that's on a dogdish flywheel? I've got a b230ft from a 940 but that came with a dual mass - mum just received a flywheel I bought off a 2lt manual 940 in the post. Can anyone confirm if this will do the job/give me a part number so I can check when I finish work
Thanks all!
ImageImage

Ride_on
Posts: 2262
Joined: 26 May 2009 05:34 pm
Location: Belfast, N. Ireland

Re: Dogdish flywheel part number/help

Post by Ride_on » 12 Aug 2013 11:12 pm

If you want to use the 940 ignition then you need any EZK flywheel (sometimes referred to as a LH flywheel), with 2 missing timing holes (60-2 pattern I think, 58 holes + 2 missing).

This is what I was given for my 360 project. Haven't tested it yet. No part number on it, came with a 230 mm clutch plate. There are various sizes.

So any EZK trigger pattern non-dualmass B2xx flywheel will do.

I actually like the 360 renix flywheel because the engine starts instantly, the 940 has to get past TDC before it will fire.
Attachments
IMG_3244s.JPG
IMG_3244s.JPG (48.38 KiB) Viewed 3910 times
1980 345 DL_______1987 360 GLE (project car restored to GLT spec and B230FT'd)
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7

Post Reply