940 Turbo

B14, B172, B19/200, D16 engine, ignition, cooling, fuel & exhaust system, gearbox, variomatic, final drive... | Tuning: engine swaps, welded diff, clutch upgrades...
NO parts requests here, please use our V3M BUY & SELL corner
Post Reply
Mcglone7
Posts: 27
Joined: 12 Feb 2013 09:45 pm

940 Turbo

Post by Mcglone7 » 03 Feb 2014 07:24 pm

Hello,

does anyone know what the thread is on the 940 turbo's for oil inlet/outlet. Also the same for water feed too.

classicswede
*** V3M DONOR ***
Posts: 5454
Joined: 25 Apr 2005 06:52 pm
Location: Anglesey North Wales
Contact:

Re: 940 Turbo

Post by classicswede » 03 Feb 2014 08:41 pm

The oil filter is 3/4 unf iirc


If you are on about the fittings on the turbo, the water connections are bolt on fittings. Not sure what the oil feed and return threads are off the top of my head but they are a standard thread common to most turbos.
Dai

Please email me directly on dai@classicswede.co.uk

http://www.classicswede.com

phone/text 07824887160

Web shop http://www.classicswede.co.uk/

Image

Mcglone7
Posts: 27
Joined: 12 Feb 2013 09:45 pm

Re: 940 Turbo

Post by Mcglone7 » 03 Feb 2014 08:50 pm

Cheers for that, i think i've found it on ebay. 12.5mm common banjo bolt size.

Nimminz
Posts: 1669
Joined: 11 Jun 2010 10:56 pm
Location: Durham City, NE England, UK
Contact:

Re: 940 Turbo

Post by Nimminz » 07 Feb 2014 11:38 am

m12 x 1.5 pitch banjo's
'88 360 +T LSD - sold
'87 760 TDI (D24TIC) - sold
'04 V40 D sport (F9Q, decat, Remapped, launch control)
'89 740 SE (b230ft, 12psi, V-cam, headwork, 'remapped', banded steels)
'86 340 DL 1.4

User avatar
filthyjohn
*** V3M DONOR ***
Posts: 2693
Joined: 12 Sep 2006 09:07 pm
Location: Sunderland, Ringpiece Of England

Re: 940 Turbo

Post by filthyjohn » 19 Feb 2014 11:01 pm

The oil outlet is a plain pipe with a bolt either side and a gasket.
'87 Nissan Sunny
'95 945 LPT
'90 340 3dr
'87 360 GLT
'87 765 TIC
'75 Manta A
'70 Rover P5 V8
'67 MGB GT
'62 amazon 2dr

Post Reply