Hello,
does anyone know what the thread is on the 940 turbo's for oil inlet/outlet. Also the same for water feed too.
940 Turbo
-
- *** V3M DONOR ***
- Posts: 5461
- Joined: 25 Apr 2005 06:52 pm
- Location: Anglesey North Wales
- Contact:
Re: 940 Turbo
The oil filter is 3/4 unf iirc
If you are on about the fittings on the turbo, the water connections are bolt on fittings. Not sure what the oil feed and return threads are off the top of my head but they are a standard thread common to most turbos.
If you are on about the fittings on the turbo, the water connections are bolt on fittings. Not sure what the oil feed and return threads are off the top of my head but they are a standard thread common to most turbos.
Dai
Please email me directly on dai@classicswede.co.uk
http://www.classicswede.com
phone/text 07824887160
Web shop http://www.classicswede.co.uk/
Please email me directly on dai@classicswede.co.uk
http://www.classicswede.com
phone/text 07824887160
Web shop http://www.classicswede.co.uk/
Re: 940 Turbo
Cheers for that, i think i've found it on ebay. 12.5mm common banjo bolt size.
Re: 940 Turbo
m12 x 1.5 pitch banjo's
'88 360 +T LSD - sold
'87 760 TDI (D24TIC) - sold
'04 V40 D sport (F9Q, decat, Remapped, launch control)
'89 740 SE (b230ft, 12psi, V-cam, headwork, 'remapped', banded steels)
'86 340 DL 1.4
'87 760 TDI (D24TIC) - sold
'04 V40 D sport (F9Q, decat, Remapped, launch control)
'89 740 SE (b230ft, 12psi, V-cam, headwork, 'remapped', banded steels)
'86 340 DL 1.4
-
- *** V3M DONOR ***
- Posts: 2693
- Joined: 12 Sep 2006 09:07 pm
- Location: Sunderland, Ringpiece Of England
Re: 940 Turbo
The oil outlet is a plain pipe with a bolt either side and a gasket.
'87 Nissan Sunny
'95 945 LPT
'90 340 3dr
'87 360 GLT
'87 765 TIC
'75 Manta A
'70 Rover P5 V8
'67 MGB GT
'62 amazon 2dr
'95 945 LPT
'90 340 3dr
'87 360 GLT
'87 765 TIC
'75 Manta A
'70 Rover P5 V8
'67 MGB GT
'62 amazon 2dr