Hi lads.
Does anyone know how to separate the Tourque tube from the Gear box of a 360?
Cheers Mark.
Tourque tube
Re: Tourque tube
you first need to unscrew the two bolts under the rubber thingies in the torquetube, then the link between the axle and gearbox is disconnected! then you need to unbolt the four imbusbolts holding the torquetube to the gearbox!
might need to losen the gear linkage
might need to losen the gear linkage
Re: Tourque tube
Take one of the bolts right out of the sleeve clamp, loosening is not enough, the bolt shaft stops it from separating.
1980 345 DL_______1987 360 GLE (project car restored to GLT spec and B230FT'd)
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7