at the end of this thread my prop won't rattle any more!
Re: at the end of this thread my prop won't rattle any more!
I'm close to quitting her, for now.. Economy has suffered again, zebedee effect is positively trippy, prop is rattling ridiculously now, fair bit of welding is needed and I've just gotten 4 grand in cold hard cash. So it's saab/jag-4aDaily time.
I'll do the waterpump, alternator, rad, pipes, seatbelts, and tappets and then I'm going to store it at my new shiny lockup/workshop and prepare it for bodywork (to await a possibly custom-prop and custom fuel+sparks plus a decent respray or whatever) while I restore a bay vw camper in the background and basicly have a good time.
I'll do the waterpump, alternator, rad, pipes, seatbelts, and tappets and then I'm going to store it at my new shiny lockup/workshop and prepare it for bodywork (to await a possibly custom-prop and custom fuel+sparks plus a decent respray or whatever) while I restore a bay vw camper in the background and basicly have a good time.
Re: at the end of this thread my prop won't rattle any more!
Keep up the great work.
1988 340 1.4 GL, 218k, 5 door (Grey Bess). Gone to CBA.
1991 340 1.7 GL, 64k, 5 door, petrol blue (Deep Blue).
1988 360 2.0 GLE, 140k, 5 door, ocean blue metallic (Blue Bess).
1989 340 1.7 GL, 108k, 3 door (Red Ness).
More info here!
1991 340 1.7 GL, 64k, 5 door, petrol blue (Deep Blue).
1988 360 2.0 GLE, 140k, 5 door, ocean blue metallic (Blue Bess).
1989 340 1.7 GL, 108k, 3 door (Red Ness).
More info here!
Re: at the end of this thread my prop won't rattle any more!
Then again I might inadvertently fix it so well I keep using it.
And.. Well..
The dizzy cap+rotor, which I sealed (experimentally) was so f*d.. (Photo)
I've replaced it with a slightly cracked dizzy cap, cracks only penettrate a mil or so so I drilled out the carbonized cracks and smoothed the internal surfaces- hey presto- totally sorted at last!
See the burned out center electrode, bits missing off the rotor arm, zinc all over the place, copper carbonate and condensation and the fact this engine actually RUN! - volvo!!
And.. Well..
The dizzy cap+rotor, which I sealed (experimentally) was so f*d.. (Photo)
I've replaced it with a slightly cracked dizzy cap, cracks only penettrate a mil or so so I drilled out the carbonized cracks and smoothed the internal surfaces- hey presto- totally sorted at last!
See the burned out center electrode, bits missing off the rotor arm, zinc all over the place, copper carbonate and condensation and the fact this engine actually RUN! - volvo!!
Re: at the end of this thread my prop won't rattle any more!
So were it that all along then? Did you know there's a new form of drug abuse in Yorkshire? E-by-gum ;-=
Re: at the end of this thread my prop won't rattle any more!
Combination of flange-leak, dizzy and accell diaphragm.
Its so sorted! Instant start all the time!
Smooth and torquey.
E by gum. Makes yer teeth fall out I heard.
Its so sorted! Instant start all the time!
Smooth and torquey.
E by gum. Makes yer teeth fall out I heard.
Re: at the end of this thread my prop won't rattle any more!
I suppose that's why its popular in yorkshire, they've not much to lose.
Re: at the end of this thread my prop won't rattle any more!
Had such an awful interaction with a yorkshirewoman, I'll be taking every opportunbity to debase the yorkshire-ers till at least 2016.
228'000miles - all good, except prop. It'll happen.
Starts first touch in all conditions!!
228'000miles - all good, except prop. It'll happen.
Starts first touch in all conditions!!
Re: at the end of this thread my prop won't rattle any more!
I just got four grand
Fills a pillowcase...
Plan is to start a profitable enterprise, but I cant decide what.
There's an infinite number of ways to make a million, and a more-easily accessible infinitum of ways to lose 4k.
Cant avoid risk.
But.... OMFG 4K That's a nut-twitchingly large amount of money.
I've got to take my time, not run into unknown territory... there's a shitload to learn.
Jag?
Fills a pillowcase...
Plan is to start a profitable enterprise, but I cant decide what.
There's an infinite number of ways to make a million, and a more-easily accessible infinitum of ways to lose 4k.
Cant avoid risk.
But.... OMFG 4K That's a nut-twitchingly large amount of money.
I've got to take my time, not run into unknown territory... there's a shitload to learn.
Jag?
Re: at the end of this thread my prop won't rattle any more!
Awesome news. I never had a head for business and I've seen a lot go wonky so do take great care with all that dough. Don't be like Ken Dodd and keep it in the attic - mind you those dogs could defend it pretty well ;-0. Franchising any interest? You could be a Mr Clutch, like the people who did the gearbox ;-
1988 340 1.4 GL, 218k, 5 door (Grey Bess). Gone to CBA.
1991 340 1.7 GL, 64k, 5 door, petrol blue (Deep Blue).
1988 360 2.0 GLE, 140k, 5 door, ocean blue metallic (Blue Bess).
1989 340 1.7 GL, 108k, 3 door (Red Ness).
More info here!
1991 340 1.7 GL, 64k, 5 door, petrol blue (Deep Blue).
1988 360 2.0 GLE, 140k, 5 door, ocean blue metallic (Blue Bess).
1989 340 1.7 GL, 108k, 3 door (Red Ness).
More info here!
Re: at the end of this thread my prop won't rattle any more!
Just been down south, done 300 miles on a tank and reserve still left. That's ace economy I think. No ignition troubles or vac leaks, everythings fine+dandy.
Exhaust is "ripe".
Handing the volvo down to the mrs and jumping in the jag by friday!
Jaguar, for men who like handjobs off beautiful women they hardly know..
I dunno what to do profiteering-wise, maybe a restoration job, open a service station or... I'm going to sleep on the cash for at least a week, excepting buying the jag. I dont know what to do with it.
Exhaust is "ripe".
Handing the volvo down to the mrs and jumping in the jag by friday!
Jaguar, for men who like handjobs off beautiful women they hardly know..
I dunno what to do profiteering-wise, maybe a restoration job, open a service station or... I'm going to sleep on the cash for at least a week, excepting buying the jag. I dont know what to do with it.
-
- Posts: 3283
- Joined: 09 Feb 2008 02:29 am
Re: at the end of this thread my prop won't rattle any more!
He cannot be Mr Clutch. Everyone will call him "Fat Bob" (even if he isn't fat, or called Bob)bogbasic wrote:Franchising any interest? You could be a Mr Clutch, like the people who did the gearbox ;-
Pauline Calf's Wedding Video - Fat Bob (John Thomson) & Mum (Sandra Gough) by Pozzitive Comedy, on Flickr
Re: at the end of this thread my prop won't rattle any more!
I think I'll maybe just do restos...
There's a great market for the kinds of cars I like fixing... I don't mind pishing around with motorbikes+campers either.
Have a flutter on the stock/currency/black markets ???
I know I dont ever want to be skint again.
There's a great market for the kinds of cars I like fixing... I don't mind pishing around with motorbikes+campers either.
Have a flutter on the stock/currency/black markets ???
I know I dont ever want to be skint again.
Re: at the end of this thread my prop won't rattle any more!
I used to quite like the Mr Clutch logo - a man with a clutch for his head and the photo looks quite amusing too but I haven't got a clue what its about, having not watched telly in earnest since the early '90's. Yeah, a classic restoration spinout looks like an evil plan.
1988 340 1.4 GL, 218k, 5 door (Grey Bess). Gone to CBA.
1991 340 1.7 GL, 64k, 5 door, petrol blue (Deep Blue).
1988 360 2.0 GLE, 140k, 5 door, ocean blue metallic (Blue Bess).
1989 340 1.7 GL, 108k, 3 door (Red Ness).
More info here!
1991 340 1.7 GL, 64k, 5 door, petrol blue (Deep Blue).
1988 360 2.0 GLE, 140k, 5 door, ocean blue metallic (Blue Bess).
1989 340 1.7 GL, 108k, 3 door (Red Ness).
More info here!
-
- Posts: 3283
- Joined: 09 Feb 2008 02:29 am
Re: at the end of this thread my prop won't rattle any more!
I forgotten how long ago it was. The Steve Coogan TV short referenced was from 1994, so maybe only 0.01% of the forum membership may remember it. The whole thing is on YouTube.bogbasic wrote: and the photo looks quite amusing too but I haven't got a clue what its about, having not watched telly in earnest since the early '90's.
Re: at the end of this thread my prop won't rattle any more!
Can you feel play in that place if yuo shaking front of prop by hand, engine off. When try to wiggle prop and turn aorund to rotate by hand does it make any sound to indicate problem with rubber ?Chris_C wrote: These are one of Chris' pet "we need to work out a solution" parts, as they are *all* knackered to varying degrees, hence the characteristic 340 prop rattle in idle. Some are less knackered than others, I spent a fair chunk of time trying to find a more betterer one.
Mine is in both test without sound and I do not feel play.
But, I changed to new made transverse curved bar that hodls front engine mounts becausse old was rusted and finally broke.
Now, sometimes I feel and hear small shudder when idling depending of incline of road.
I think there is procedure to check and align those engine mounts on front member so that prop is rotating under no stress.
How is that done, maybe there is topic about it so please a hint to. I do not find in green manual this alignment procedure.
It is Mk3, 1987 my with B14 and 215k (km).
Prop looks quite good, and would like to stay alike.
1995 945SE AW71L bifuel 205k km
1987 340GL M47 II LPG 208 km
and still rolling
1987 340GL M47 II LPG 208 km
and still rolling