B200 flywheels

B14, B172, B19/200, D16 engine, ignition, cooling, fuel & exhaust system, gearbox, variomatic, final drive... | Tuning: engine swaps, welded diff, clutch upgrades...
NO parts requests here, please use our V3M BUY & SELL corner
Post Reply
Logan360
Posts: 848
Joined: 23 Jun 2012 08:51 am

B200 flywheels

Post by Logan360 » 15 Apr 2014 08:28 am

Hey guys I need to know if there's any way of making the B200E flywheel run the LH2.4? Like filling up the holes with weld lathing it down and redrilling? And balancing?
Own:
86 360GLT
97 S90
92 960S, Royal
01 Subaru Lancaster 6
96 Volvo 854R

Owned
E90 320 M-sport wagon
S60T -Mazda Familia
850lpt -AU Falcon
855T5 -91, 95, 97 960
940TIC -Mitsi GTO TT
16x 360-Toyota corolla
Toyota corona-R32 Skyline
V70R -V70T5

Ride_on
Posts: 2262
Joined: 26 May 2009 05:34 pm
Location: Belfast, N. Ireland

Re: B200 flywheels

Post by Ride_on » 15 Apr 2014 10:08 pm

you`d need to fill with steel, maybe thread it and lathe flat, then balance, but I thought the number of holes would be different and the mgt might need those holes to be correctly spaced to work the crank angle out.

An easier approach might be to make/buy your own wheel and put it on the crank pulley, or even drill the crank pulley and arrange a pickup near that.

You could also consider using a renix unit, or even old fashioned points or some distrbutor pickup. the lh2.4 is fuel mgt, and works with a EZK unit for ignition. The LH2.4 provides a load signal instead of the vacumm sensor on the Renix.

Finally you good go megasquirt or some other programmable ignition and use any pattern.
1980 345 DL_______1987 360 GLE (project car restored to GLT spec and B230FT'd)
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7

Logan360
Posts: 848
Joined: 23 Jun 2012 08:51 am

Re: B200 flywheels

Post by Logan360 » 16 Apr 2014 08:04 am

Would be cheaper to import 5 flywheels than using megasquirt.
Own:
86 360GLT
97 S90
92 960S, Royal
01 Subaru Lancaster 6
96 Volvo 854R

Owned
E90 320 M-sport wagon
S60T -Mazda Familia
850lpt -AU Falcon
855T5 -91, 95, 97 960
940TIC -Mitsi GTO TT
16x 360-Toyota corolla
Toyota corona-R32 Skyline
V70R -V70T5

360beast
Posts: 873
Joined: 27 Dec 2013 08:40 pm

Re: B200 flywheels

Post by 360beast » 16 Apr 2014 09:32 am

Logan360 wrote:Would be cheaper to import 5 flywheels than using megasquirt.
Is that a challenge for me good sir :lol:

User avatar
Joris
Posts: 147
Joined: 13 Nov 2013 02:43 pm
Location: The Netherlands, across the pond

Re: B200 flywheels

Post by Joris » 16 Apr 2014 12:00 pm

Modifing the b200e flywheel to a lh2.4 flywheel is a lot of work, I would consider other options! Is it really hard to get a volvo 240 lh2.4 flywheel? Then I would look for a 60-2 triggerwheel.

Logan360
Posts: 848
Joined: 23 Jun 2012 08:51 am

Re: B200 flywheels

Post by Logan360 » 16 Apr 2014 08:19 pm

I'm going B200FT/ET not really sure which, but finding a turbo Volvo manual let alone an older one is dam near impossible over here. Hence wanting to modify the 360 flywheel. I have the 2L turbo 940 ecu and loom, if that helps. What car could I pull a flywheel from?
Own:
86 360GLT
97 S90
92 960S, Royal
01 Subaru Lancaster 6
96 Volvo 854R

Owned
E90 320 M-sport wagon
S60T -Mazda Familia
850lpt -AU Falcon
855T5 -91, 95, 97 960
940TIC -Mitsi GTO TT
16x 360-Toyota corolla
Toyota corona-R32 Skyline
V70R -V70T5

Ride_on
Posts: 2262
Joined: 26 May 2009 05:34 pm
Location: Belfast, N. Ireland

Re: B200 flywheels

Post by Ride_on » 16 Apr 2014 10:30 pm

Almost any manual 700/900 without a dual mass flywheel, with Bosch computer ignition.. I think.
1980 345 DL_______1987 360 GLE (project car restored to GLT spec and B230FT'd)
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7

Nimminz
Posts: 1669
Joined: 11 Jun 2010 10:56 pm
Location: Durham City, NE England, UK
Contact:

Re: B200 flywheels

Post by Nimminz » 16 Apr 2014 11:15 pm

seem to remember it needs to be a m45/m47 box not the M90, Not entirely sure but something to look into

a trigger wheel mounted to the crank pulley could be a solution and would be far easier/cheaper than trying to get a 360 changed
'88 360 +T LSD - sold
'87 760 TDI (D24TIC) - sold
'04 V40 D sport (F9Q, decat, Remapped, launch control)
'89 740 SE (b230ft, 12psi, V-cam, headwork, 'remapped', banded steels)
'86 340 DL 1.4

Logan360
Posts: 848
Joined: 23 Jun 2012 08:51 am

Re: B200 flywheels

Post by Logan360 » 17 Apr 2014 02:45 am

does anyone have a trigger wheel??? how would i mount the cps for the turbo loom?? and i was told the turbo 200 flywheel isnt dual mass??
Own:
86 360GLT
97 S90
92 960S, Royal
01 Subaru Lancaster 6
96 Volvo 854R

Owned
E90 320 M-sport wagon
S60T -Mazda Familia
850lpt -AU Falcon
855T5 -91, 95, 97 960
940TIC -Mitsi GTO TT
16x 360-Toyota corolla
Toyota corona-R32 Skyline
V70R -V70T5

360beast
Posts: 873
Joined: 27 Dec 2013 08:40 pm

Re: B200 flywheels

Post by 360beast » 17 Apr 2014 09:19 am

Do you want me to try contacting the guy I got the loom from? He said he will have it for a few more months and it's finally sunny so won't be freezing in the snow this time.

Logan360
Posts: 848
Joined: 23 Jun 2012 08:51 am

Re: B200 flywheels

Post by Logan360 » 21 Apr 2014 10:30 pm

Yea I still need the flywheel regardless, and those relays behind the dash, and injectors.
Own:
86 360GLT
97 S90
92 960S, Royal
01 Subaru Lancaster 6
96 Volvo 854R

Owned
E90 320 M-sport wagon
S60T -Mazda Familia
850lpt -AU Falcon
855T5 -91, 95, 97 960
940TIC -Mitsi GTO TT
16x 360-Toyota corolla
Toyota corona-R32 Skyline
V70R -V70T5

Post Reply