turbo oil feed

B14, B172, B19/200, D16 engine, ignition, cooling, fuel & exhaust system, gearbox, variomatic, final drive... | Tuning: engine swaps, welded diff, clutch upgrades...
NO parts requests here, please use our V3M BUY & SELL corner
Post Reply
Posts: 38
Joined: 05 Oct 2009 01:38 am

turbo oil feed

Post by matt~driver » 15 May 2014 06:59 pm

hi im planning on fitting a turbo to my b200 engined Volvo 360 but am unsure were to get a oil feed for the turbo from

User avatar
Posts: 147
Joined: 13 Nov 2013 02:43 pm
Location: The Netherlands, across the pond

Re: turbo oil feed

Post by Joris » 15 May 2014 08:26 pm

You can drill into the oil gallery where the turbo engines get their oil from, not recommended because you get metal flakes in your oil lines.

Better options are the oilpressure sensor hole, use a 'T' piece! or the blanking bolt/thing under the waterpump on the front of the engine. Both have 1/8 npt thread if I remember correct

Post Reply