Torque Tube O-Ring
Torque Tube O-Ring
Anyone have the exact spec of the torque tube O-ring seal that sits in the clutch bell housing groove. Measures about 98 x 5.5-5.8mm.
1980 345 DL_______1987 360 GLE (project car restored to GLT spec and B230FT'd)
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7
Re: Torque Tube O-Ring
http://www.tss.trelleborg.com/global/en ... oCodjw_wcB
Gives sizes, it'll either be a metric or BS (and at 98mm, I'd start with the BS...)
Chemical wise, no idea, but given it's location I'd go for a Viton to give some kind of oil resistance
Gives sizes, it'll either be a metric or BS (and at 98mm, I'd start with the BS...)
Chemical wise, no idea, but given it's location I'd go for a Viton to give some kind of oil resistance
'89(G) 340 GLE B172k
'03 S60 D5 SE, '91 (J) MX5, 1954 Cyclemaster
Ex:
'89(F) 340 GL F7R (ex B172k) - Fake -> SBKV 300 Runner Up 08, 12; '91(H) 340 GL B14.4E - Kar; '88(F) 360 GLT B200E - Jet -> BKV 300 Runner Up 09; '89(G) 360 GLT B200E - Beast
'03 S60 D5 SE, '91 (J) MX5, 1954 Cyclemaster
Ex:
'89(F) 340 GL F7R (ex B172k) - Fake -> SBKV 300 Runner Up 08, 12; '91(H) 340 GL B14.4E - Kar; '88(F) 360 GLT B200E - Jet -> BKV 300 Runner Up 09; '89(G) 360 GLT B200E - Beast
Re: Torque Tube O-Ring
Well I got a 94.x mm(ID) ring which fits but is bigger than the original. The 98mm above was a centre-centre dimension, latest efforts consider it to be 92mm id. I think it will do the job. I have 4 more if anyone wants one.
The next size was 89.x mm, might be too small so I figured I can cut and glue if necessary.
The next size was 89.x mm, might be too small so I figured I can cut and glue if necessary.
1980 345 DL_______1987 360 GLE (project car restored to GLT spec and B230FT'd)
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7
-
- Posts: 2
- Joined: 17 Jul 2015 06:00 am
Re: Torque Tube O-Ring
Are you a real person? This comment makes no sense and is similar to another post you made.
1980 345 DL_______1987 360 GLE (project car restored to GLT spec and B230FT'd)
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7