Injection pump union

B14, B172, B19/200, D16 engine, ignition, cooling, fuel & exhaust system, gearbox, variomatic, final drive... | Tuning: engine swaps, welded diff, clutch upgrades...
NO parts requests here, please use our V3M BUY & SELL corner
Post Reply
Ride_on
Posts: 2262
Joined: 26 May 2009 05:34 pm
Location: Belfast, N. Ireland

Injection pump union

Post by Ride_on » 08 Apr 2015 03:47 pm

The Bosch data says the union is M12x1.5, and it looks like a swivel conical joint hose barb.

Of course I cannot find said hose union, mine is siezed and horrible, want new shiny one for new hose and pump!

I can get M12-6mm hose or BSP 1/4" to 8mm hose, BSP will probably fit but not strongly, will be loose with less than ideal engagement 11.9mm female.

Have I got something wrong?
1980 345 DL_______1987 360 GLE (project car restored to GLT spec and B230FT'd)
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7

Ride_on
Posts: 2262
Joined: 26 May 2009 05:34 pm
Location: Belfast, N. Ireland

Re: Injection pump union

Post by Ride_on » 08 Apr 2015 10:10 pm

Measuring the male threads on the pump its more like M14, doesn't seem to be correctly indicated on the Bosch data.
1980 345 DL_______1987 360 GLE (project car restored to GLT spec and B230FT'd)
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7

Post Reply