The Bosch data says the union is M12x1.5, and it looks like a swivel conical joint hose barb.
Of course I cannot find said hose union, mine is siezed and horrible, want new shiny one for new hose and pump!
I can get M12-6mm hose or BSP 1/4" to 8mm hose, BSP will probably fit but not strongly, will be loose with less than ideal engagement 11.9mm female.
Have I got something wrong?
Injection pump union
Injection pump union
1980 345 DL_______1987 360 GLE (project car restored to GLT spec and B230FT'd)
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7
Re: Injection pump union
Measuring the male threads on the pump its more like M14, doesn't seem to be correctly indicated on the Bosch data.
1980 345 DL_______1987 360 GLE (project car restored to GLT spec and B230FT'd)
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7