availability of seals/bearings

B14, B172, B19/200, D16 engine, ignition, cooling, fuel & exhaust system, gearbox, variomatic, final drive... | Tuning: engine swaps, welded diff, clutch upgrades...
NO parts requests here, please use our V3M BUY & SELL corner
Post Reply
User avatar
madseb
Posts: 345
Joined: 18 Feb 2010 09:58 am

availability of seals/bearings

Post by madseb » 19 Apr 2015 05:18 pm

Hello all,
I was hoping that someone could shed some light on this for me.
currently reconditioning a diff assembly, and was wondering if the seals/shims, and bearings are still available from Volvo, or a possible parts supplier.
I am in need pretty urgently, as id like to get the unit built and installed over the next month, for a meet deadline.
I've scoured the green book, and cant seem to find any part numbers either.

any help is greatly appreciated.

thanks

madseb
Image

Ride_on
Posts: 2262
Joined: 26 May 2009 05:34 pm
Location: Belfast, N. Ireland

Re: availability of seals/bearings

Post by Ride_on » 20 Apr 2015 02:32 pm

I've identified the output bearing and seals in the LSD thread, if thats any help.

viewtopic.php?f=53&t=11312&start=180
1980 345 DL_______1987 360 GLE (project car restored to GLT spec and B230FT'd)
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7

User avatar
madseb
Posts: 345
Joined: 18 Feb 2010 09:58 am

Re: availability of seals/bearings

Post by madseb » 20 Apr 2015 07:26 pm

Thanks for the help ride on. I have indeed read your posts many times.
And Thankyou for highlighting the aftermarket options.
I'm in desperate need to identify a supplier for the output shims and crush collar for the input shaft. And also the associated bearing and seal.

Big thanks for your help. This has already reduced the workload.

Madseb
Last edited by madseb on 28 Apr 2015 05:32 pm, edited 1 time in total.
Image

Ride_on
Posts: 2262
Joined: 26 May 2009 05:34 pm
Location: Belfast, N. Ireland

Re: availability of seals/bearings

Post by Ride_on » 22 Apr 2015 12:06 pm

I didn't do those on mine, but I might regret later. Do post whatever specs/part numbers you identify.
1980 345 DL_______1987 360 GLE (project car restored to GLT spec and B230FT'd)
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7

Post Reply