360 injection pump prefilter
360 injection pump prefilter
This is the filter by the fuel tank outlet. Anyone got a source for this, I've been through everything I can find online and its all too big (long) or too small unions. 12mm unions and a high flow rate are required.
Cheapest is a 200mm long unit from AFS, but no way will it fit. Next best is powermax billet type thing at £30, but still too big. I did try a Sytec unit but it had only 5mm holes inside and would have been too big anyway. There is a cheap AL unit from China but the could not answer any technical questions, probably too big anyway.
If I could get a right angle union I might be able to make the Powermax to fit.
There are some LPG filter that look good but hard to know if the are compatible with petrol and if the flow rate is high enough.
Cheapest is a 200mm long unit from AFS, but no way will it fit. Next best is powermax billet type thing at £30, but still too big. I did try a Sytec unit but it had only 5mm holes inside and would have been too big anyway. There is a cheap AL unit from China but the could not answer any technical questions, probably too big anyway.
If I could get a right angle union I might be able to make the Powermax to fit.
There are some LPG filter that look good but hard to know if the are compatible with petrol and if the flow rate is high enough.
1980 345 DL_______1987 360 GLE (project car restored to GLT spec and B230FT'd)
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7
Re: 360 injection pump prefilter
I got mine from the Volvo dealer, because I could not find a replacement online. And even they had trouble finding a original one. Did not cost much though, under a tenner if I remember right. So you might try a call to a Volvo dealer
Re: 360 injection pump prefilter
Yeah I found an old post about it, was still available in 2010. Didn't have the pn in work today, will try them tomorrow.
1980 345 DL_______1987 360 GLE (project car restored to GLT spec and B230FT'd)
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7
-
- *** V3M DONOR ***
- Posts: 4398
- Joined: 06 Jan 2007 02:38 pm
- Location: Bonn, Germany
Re: 360 injection pump prefilter
Can't believe it was 2008 when I started this thread:
viewtopic.php?f=13&t=5758
I last ordered that filter from Volvo in 2010 (3202711). If they don't have it, it looks like it is still available from Skandix:
http://www.skandix.de/en/spare-parts/fi ... l/1009886/
Cheers
Tom
viewtopic.php?f=13&t=5758
I last ordered that filter from Volvo in 2010 (3202711). If they don't have it, it looks like it is still available from Skandix:
http://www.skandix.de/en/spare-parts/fi ... l/1009886/
Cheers
Tom
343 GL Touring B14.1E CVT (155) 98000kms 1980 (sold)
343 L Junior B14.3E MT4 (155) 229000kms 1981 (scrapped)
343 DLS B19A MT4 (155) 167900kms 1982
360 GL Injection B200F MT5 (231) 348598kms 1988 (scrapped)
360 GLT B200F MT5 (302) 230000kms 1988
343 L Junior B14.3E MT4 (155) 229000kms 1981 (scrapped)
343 DLS B19A MT4 (155) 167900kms 1982
360 GL Injection B200F MT5 (231) 348598kms 1988 (scrapped)
360 GLT B200F MT5 (302) 230000kms 1988
Re: 360 injection pump prefilter
I bought one last summer, so they are out there!trabitom99 wrote:Can't believe it was 2008 when I started this thread:
viewtopic.php?f=13&t=5758
I last ordered that filter from Volvo in 2010 (3202711). If they don't have it, it looks like it is still available from Skandix:
http://www.skandix.de/en/spare-parts/fi ... l/1009886/
Cheers
Tom
Re: 360 injection pump prefilter
Skandix looks like a goer, 4 pieces available, strange it didn't come up in searches. I tried the Belfast dealer today, just got blank stares, as much as you can over the phone.
Still I've progressed with a billet type using a right angle, will need supported so probably more work than necessary. I'll get all that done and the filter will be too restrictive or something, but its changable.
Still I've progressed with a billet type using a right angle, will need supported so probably more work than necessary. I'll get all that done and the filter will be too restrictive or something, but its changable.
1980 345 DL_______1987 360 GLE (project car restored to GLT spec and B230FT'd)
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7
-
- Posts: 3283
- Joined: 09 Feb 2008 02:29 am
Re: 360 injection pump prefilter
I can ask Dave in Dublin if you want?Ride_on wrote:I tried the Belfast dealer today, just got blank stares, as much as you can over the phone.
(Dave doesn't do blank stares and has a 460, always helpful )
Re: 360 injection pump prefilter
I see if I can get this powermax to work first, waiting for a right angle adaptor.
1980 345 DL_______1987 360 GLE (project car restored to GLT spec and B230FT'd)
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7
Re: 360 injection pump prefilter
I'm still using the powermax filter but not entirely happy with it. So I really want something closer to original.
The original is available from Skandix at EUR50 + 20, but its against my religion to pay that.
Anyone any other suggestions?
After searching for 1/2" strainer, found this one:
http://www.blitzworld.co.uk/vigilante-i ... i2467.html
looks suitable but expensive for a standard item. Have asked for dimensions.
The original is available from Skandix at EUR50 + 20, but its against my religion to pay that.
Anyone any other suggestions?
After searching for 1/2" strainer, found this one:
http://www.blitzworld.co.uk/vigilante-i ... i2467.html
looks suitable but expensive for a standard item. Have asked for dimensions.
1980 345 DL_______1987 360 GLE (project car restored to GLT spec and B230FT'd)
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7
Re: 360 injection pump prefilter
When my fuel pump died on my 1st 360 I pinched my brothers spare pump for his 1980's Audi 90 Quattro they are the same length etc so maybe the filter is similar.
Re: 360 injection pump prefilter
Had a quick look for Audi stuff but only the big pressure one came up. There isn't alot of space on the 360, the original is <110mm and the pipes bent at min radius, most of the standard parts are over 125mm and I don't think will fit.
Anyway found the above part cheaper;
https://www.inlinefilters.co.uk/Filters ... FBW-BF7693
And on ebay for GBP15 delivered. Sounds suitable anyway.
Also looking at my original, still useable but a big pile of well stuck in dirt in it.
Anyway found the above part cheaper;
https://www.inlinefilters.co.uk/Filters ... FBW-BF7693
And on ebay for GBP15 delivered. Sounds suitable anyway.
Also looking at my original, still useable but a big pile of well stuck in dirt in it.
1980 345 DL_______1987 360 GLE (project car restored to GLT spec and B230FT'd)
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7
Re: 360 injection pump prefilter
Thats the pressure filter, its too big and probably too restrictive for the pre-pump application.
Last edited by Ride_on on 08 Sep 2018 04:26 pm, edited 1 time in total.
1980 345 DL_______1987 360 GLE (project car restored to GLT spec and B230FT'd)
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7
Re: 360 injection pump prefilter
So I got the Baldwin BF7693 and its a fairly good fit. It doesn't have the offset of the original so gets a bit closer to the tank, but I think I didn't use a long enough bit of pipe to the tank, so position is a bit critical. In the end I used a stuck foam pad to cushion it against the tank.
1980 345 DL_______1987 360 GLE (project car restored to GLT spec and B230FT'd)
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7
Re: 360 injection pump prefilter
Apologies for dredging up old posts but this is very useful info.
How has the Baldwin filter performed ? Have you changed it again since posting this ?
Think I need to replace the pre-filter on mine which is still an original but is showing debris laying in it.
It would be handy to have a filter you can see inside like the old one but beggars can't be choosers....
Stupid question, I assume unless the hoses are nipped off the whole contents of the tank will dump out when changing ?
Its probably worth draining down fully and replacing the hoses while going to the efforts.
Cheers Dave
How has the Baldwin filter performed ? Have you changed it again since posting this ?
Think I need to replace the pre-filter on mine which is still an original but is showing debris laying in it.
It would be handy to have a filter you can see inside like the old one but beggars can't be choosers....
Stupid question, I assume unless the hoses are nipped off the whole contents of the tank will dump out when changing ?
Its probably worth draining down fully and replacing the hoses while going to the efforts.
Cheers Dave
1987 360 GLT