Injection wiring grommet

B14, B172, B19/200, D16 engine, ignition, cooling, fuel & exhaust system, gearbox, variomatic, final drive... | Tuning: engine swaps, welded diff, clutch upgrades...
NO parts requests here, please use our V3M BUY & SELL corner
Ride_on
Posts: 2262
Joined: 26 May 2009 05:34 pm
Location: Belfast, N. Ireland

Re: Injection wiring grommet

Post by Ride_on » 20 Jun 2015 01:38 pm

I shouldn't have any problem with wiring as my car is completely stripped, just going use wire from the copious 940 loom. But is my assumption correct about the GLT wiring going down the the fuel sender grommet under the back seat?
1980 345 DL_______1987 360 GLE (project car restored to GLT spec and B230FT'd)
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7

User avatar
Joris
Posts: 147
Joined: 13 Nov 2013 02:43 pm
Location: The Netherlands, across the pond

Re: Injection wiring grommet

Post by Joris » 20 Jun 2015 03:38 pm

Ride_on wrote:I shouldn't have any problem with wiring as my car is completely stripped, just going use wire from the copious 940 loom. But is my assumption correct about the GLT wiring going down the the fuel sender grommet under the back seat?
Yes, you are right!

Post Reply