1.7 turbo

B14, B172, B19/200, D16 engine, ignition, cooling, fuel & exhaust system, gearbox, variomatic, final drive... | Tuning: engine swaps, welded diff, clutch upgrades...
NO parts requests here, please use our V3M BUY & SELL corner
Post Reply
Sharpspike
Posts: 17
Joined: 05 Jun 2014 09:46 am

1.7 turbo

Post by Sharpspike » 02 Nov 2015 06:48 pm

Hi guys I'm doing the swap from 1.7 to turbo, and I have a question about ignition system and the flywheel, could you help me , I dont have flywheel or ignition coil from the turbo unit, is it possible if I put the 1.7 engines flywheel which has injection system, and put the stock ignition coil, would it work with the turbo ecu? Thank you for answers, because its hard to get the turbo parts for me

classicswede
*** V3M DONOR ***
Posts: 5461
Joined: 25 Apr 2005 06:52 pm
Location: Anglesey North Wales
Contact:

Re: 1.7 turbo

Post by classicswede » 02 Nov 2015 10:06 pm

You need to the turbo flywheel.

Is the engine from an automatic?
Dai

Please email me directly on dai@classicswede.co.uk

http://www.classicswede.com

phone/text 07824887160

Web shop http://www.classicswede.co.uk/

Image

Sharpspike
Posts: 17
Joined: 05 Jun 2014 09:46 am

Re: 1.7 turbo

Post by Sharpspike » 03 Nov 2015 01:06 pm

Engine is manual, and also I need ignition coil from turbo unit yes?

classicswede
*** V3M DONOR ***
Posts: 5461
Joined: 25 Apr 2005 06:52 pm
Location: Anglesey North Wales
Contact:

Re: 1.7 turbo

Post by classicswede » 03 Nov 2015 08:32 pm

yes you will and all the wiring to go with it
Dai

Please email me directly on dai@classicswede.co.uk

http://www.classicswede.com

phone/text 07824887160

Web shop http://www.classicswede.co.uk/

Image

Post Reply