Hi guys,
Anybody know the thread size and pitch of the filler plug for a manual 360 gearbox (1989 transaxle type) ?
The head of my plug is buggered and want to get a spare before I attack it with stillsons
360 manual gearbox filler plug
360 manual gearbox filler plug
1989 Volvo 360 GLT
Re: 360 manual gearbox filler plug
I'll have a hunt tomorrow but others will prob have one to hand.
1988 340 1.4 GL, 218k, 5 door (Grey Bess). Gone to CBA.
1991 340 1.7 GL, 64k, 5 door, petrol blue (Deep Blue).
1988 360 2.0 GLE, 140k, 5 door, ocean blue metallic (Blue Bess).
1989 340 1.7 GL, 108k, 3 door (Red Ness).
More info here!
1991 340 1.7 GL, 64k, 5 door, petrol blue (Deep Blue).
1988 360 2.0 GLE, 140k, 5 door, ocean blue metallic (Blue Bess).
1989 340 1.7 GL, 108k, 3 door (Red Ness).
More info here!
-
- *** V3M DONOR ***
- Posts: 4398
- Joined: 06 Jan 2007 02:38 pm
- Location: Bonn, Germany
Re: 360 manual gearbox filler plug
Hi,
the part number for the filler plug from 1987 on should be 1381504 or 30713275
This link pops up on the Skandix website using those part numbers:
http://www.skandix.de/en/spare-parts/dr ... e/1018859/
they say it should be M18x1,5
But I can't guarantee it ...
Cheers
Tom
the part number for the filler plug from 1987 on should be 1381504 or 30713275
This link pops up on the Skandix website using those part numbers:
http://www.skandix.de/en/spare-parts/dr ... e/1018859/
they say it should be M18x1,5
But I can't guarantee it ...
Cheers
Tom
343 GL Touring B14.1E CVT (155) 98000kms 1980 (sold)
343 L Junior B14.3E MT4 (155) 229000kms 1981 (scrapped)
343 DLS B19A MT4 (155) 167900kms 1982
360 GL Injection B200F MT5 (231) 348598kms 1988 (scrapped)
360 GLT B200F MT5 (302) 230000kms 1988
343 L Junior B14.3E MT4 (155) 229000kms 1981 (scrapped)
343 DLS B19A MT4 (155) 167900kms 1982
360 GL Injection B200F MT5 (231) 348598kms 1988 (scrapped)
360 GLT B200F MT5 (302) 230000kms 1988
Re: 360 manual gearbox filler plug
Yeah they are 18x1.5, same as the drain and diff filler plug.
The gearbox filler is a little special with resessed shank above the thread and a tapered flange, but I used the simpler diff filler type with a large round section washer. Seemed to seal ok but its not immersed.
Would like to get more appropriate ones
The gearbox filler is a little special with resessed shank above the thread and a tapered flange, but I used the simpler diff filler type with a large round section washer. Seemed to seal ok but its not immersed.
Would like to get more appropriate ones
1980 345 DL_______1987 360 GLE (project car restored to GLT spec and B230FT'd)
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7