Hi everyone, first post on 300mania, so I got a 360 for a while back, started it up, ran fine. Testdrive and went about 10km, then it just died, and I found that the renix was at fault. Changed it and it started up fine, took some more testdrives but after about 5km it died again, but this time it starts, but as fast as you let go of the key it dies.
Runs on the cold start injector.
So now the problem, i cant get my injectors to open, the fuelpump works, it gets pressure but dont seem to get the signal to open. With igniton on i do not have 12v on the injectors, but as I turn the starter it gets volt, not 12 tho.