Volvo 340 Turbo conversion?

Post by **Black_360_GLT** » 05 Mar 2004 08:17 pm

Has anyone ever tried or seen a
Volvo 340 with a Renault 5 GT turbo engine fitted?

Post by **340customizer** » 06 Mar 2004 10:33 pm

Well

I've done some research and one of your biggest prob. is making an exaust man.
Becoase the std exaust brings the turbo in the rong place.
Where your heater is now.

But if you go along with the 340 GTT project don't hessitate to ask my something technical.(I
still have some tech.books.

)
I drove a R5 GTT for 2 years and it was a real handfull.

On the road as well as in the garage.

But rust was my biggest enemy.

But anyway i chose to tune my std. engine.
I just took out my engine today.
And i tune my B14-4e engine.(hopefully to 90a95 hp.)
The only GTT part on my new engine is the rockershaft.
Which is stronger.
I wil try out a R5 Alpine carb.
This carb fits easely with a few mods.

Just take some parts from your old carb.
I let you guys know how it drives.
Greets
Andries

Post by **paul** » 06 Jun 2007 09:11 pm

Hy,
I am also very interested in turbo-ing my 340 dl.... It is a renault f8m engine 1,6 Diesel. Actualy, i found this site looking for imformation on this matter. Coul anyone help me? Can it be done? Is it worth it. Changing the engine is a NO GO...

Post by **filthyjohn** » 07 Jun 2007 12:28 pm

This might sound daft, but nitrous oxide works really well on diesel engines, and would probably be easier than fitting a turbo. I'd imagine the diesel has a beefier clutch than the petrol too, though i could very easily not know what I'm talking about. Just a thought.

Post by **classicswede** » 07 Jun 2007 12:55 pm

With the DERV engine LPG is a cheap easy way to get a bit more power.

The 1.4 turbo has been done - look through the genaral discussion forum its there some where

Post by **paul** » 08 Jun 2007 08:04 am

i'm a 19 year old student, and money is one of the first problems... so even getting a turbo will be a summer project... hope to mate it happen. I work with a friend of mine... i just love my 340 DL, installed some sound etc... but want more power... so i really want a turbo. Has anyone done it on a 1,6 Diesel? what turbo shoud buy? suppercharger? could you point me in the right direction??

Post by **Rob@VEMS UK** » 12 Jun 2007 08:49 am

I did it the otherway round and fitted a 2.0 440 volvo engine to a Renault 5 GT Turbo, everything fitted nicely as its the same dimension block as the Renault 1.7 that was in the GTS. I used the 1.7 440 turbo exhaust and inlet and machined the squish bands out of the head to get the compression to 7:1

I'm not claiming to be clever or anything like that because the engine never ran properly due to problems with getting the ECU to work and realising that the chassis was a death trap.

If you can fit the 440 engine to a Renault then surely you can fit the 440 to the 340?

Post by **pettaw** » 12 Jun 2007 08:45 pm

I you'd used MS rather than VEMS then you would have maybe stood a chance

Post by **340cbr** » 12 Jun 2007 09:40 pm

I have the 440 Turbo engine in my 340 as some other people round here.

It's not easy, but it can be done with more or less work

Post by **foggyjames** » 13 Jun 2007 01:34 am

Haha, nice and friendly there Andy

Those Renault units are good up to a point, but they don't seem to hold up well to elevated boost. They're not much loved in the Volvo world (although the 16v varient is flavour of the week at present). If you wanna go really fast in a 300, you need a more manly engine.

cheers

James

Post by **pettaw** » 13 Jun 2007 05:40 am

foggyjames wrote:Haha, nice and friendly there Andy

I'm a MS user, do a search

Post by **Frits** » 13 Jun 2007 04:52 pm

paul wrote:i'm a 19 year old student, and money is one of the first problems... so even getting a turbo will be a summer project... hope to mate it happen. I work with a friend of mine... i just love my 340 DL, installed some sound etc... but want more power... so i really want a turbo. Has anyone done it on a 1,6 Diesel? what turbo shoud buy? suppercharger? could you point me in the right direction??

I'm student too.. Also almost haven't any mony. But you do need e bit of money. If you don't wanna spend anything, don't start a turbo project.

Post by **germ** » 13 Jun 2007 11:00 pm

1.9TURBOdiesel

Cheers
will

Website · Post by **antiekeradio** » 19 Jun 2007 11:45 am

Frits has such a project going on at the moment.

he is still working at the manifolds etc. but has a lot of things done already.