Collection of big mechanical bits for 300s

Put here your advertisements to sell cars and parts
User avatar
filthyjohn
*** V3M DONOR ***
Posts: 2693
Joined: 12 Sep 2006 09:07 pm
Location: Sunderland, Ringpiece Of England

Re: Collection of big mechanical bits for 300s

Post by filthyjohn » 11 Aug 2011 12:35 pm

Nosher wrote:Hey, would you have a standard 340 1.4 exhaust (full system from the downpipe back)?
Cheers
Alfie
Sorry mate I haven't had a 1.4 for ages, until recently, so I got rid of all the exhaust I had lying around.

jon-ovlov wrote:Possible needage of another prop, depending on the turn around of the custom unit.

Also out of interest, how much is the 343 going to be? . . . .
I've only got 1 spare prop, if I drive my 340 to RetroRides I'll be taking it with me in the boot just in case. If I make it back safely it'll be available.
What's the going rate for a prop these days?
As for the 343 I'd be looking for around £400 with all new brakes and a canny bit of work done to it. £500 if you want it with the Ally Cats. I'll start a thread on that in the next few days.
'87 Nissan Sunny
'95 945 LPT
'90 340 3dr
'87 360 GLT
'87 765 TIC
'75 Manta A
'70 Rover P5 V8
'67 MGB GT
'62 amazon 2dr

theo2468
Posts: 1417
Joined: 11 Oct 2010 02:34 am
Location: cornwall

Re: Collection of big mechanical bits for 300s

Post by theo2468 » 11 Aug 2011 01:23 pm

ill be interested in the alleycats on there own
if your willing
C25 ECV-1985-Mk2 340GL-Kessy
A889 VUY-1983-Mk2 360GLS-RUF
volvosneverdie wrote:Vnd says:
diffs, are like pubs and legs.
Best appreciated when open.
I probably should have specified ladies legs in there too. [+=] "embarrarrased emoticon"[].com

User avatar
jon-ovlov
Posts: 1291
Joined: 30 Jul 2010 09:45 pm
Location: Bristol/Birmingham

Re: Collection of big mechanical bits for 300s

Post by jon-ovlov » 11 Aug 2011 06:24 pm

Cool, prop was a precaution just in case the custom one doesn't arrive in time. I'm told it will be done for Tuesday, so s'all good! £500 eh? If only I could find somewhere to store it! :lol:
Image
Speedy88 wrote: Leave choke on, idling obnoxiously until neighbours peer out windows at the noisy exhaust
Give neighbours thumbs up
Rev engine to 7K
Exit street sideways
Win at life.

User avatar
filthyjohn
*** V3M DONOR ***
Posts: 2693
Joined: 12 Sep 2006 09:07 pm
Location: Sunderland, Ringpiece Of England

Re: Collection of big mechanical bits for 300s

Post by filthyjohn » 12 Aug 2011 12:03 am

jon-ovlov wrote:Cool, prop was a precaution just in case the custom one doesn't arrive in time. I'm told it will be done for Tuesday, so s'all good! £500 eh? If only I could find somewhere to store it! :lol:

It lives on the road at the moment, nicely waterproof and running lovely :wink:

theo2468 wrote:ill be interested in the alleycats on there own
if your willing

Maybe Theo, they really suit the car though, but if whoever buys the car isn't too fussed by them you can have first dibs mate.
'87 Nissan Sunny
'95 945 LPT
'90 340 3dr
'87 360 GLT
'87 765 TIC
'75 Manta A
'70 Rover P5 V8
'67 MGB GT
'62 amazon 2dr

theo2468
Posts: 1417
Joined: 11 Oct 2010 02:34 am
Location: cornwall

Re: Collection of big mechanical bits for 300s

Post by theo2468 » 13 Aug 2011 03:56 pm

show me a picture of the 343 on the alley cats and ill be extremely tempted to buy it if i can flog my mk3 on.
i do like silver mk2's
C25 ECV-1985-Mk2 340GL-Kessy
A889 VUY-1983-Mk2 360GLS-RUF
volvosneverdie wrote:Vnd says:
diffs, are like pubs and legs.
Best appreciated when open.
I probably should have specified ladies legs in there too. [+=] "embarrarrased emoticon"[].com

User avatar
SteveP
*** V3M DONOR ***
Posts: 7943
Joined: 21 Sep 2004 12:45 pm
Location: Coventry, UK

Re: Collection of big mechanical bits for 300s

Post by SteveP » 13 Aug 2011 04:42 pm

The 343 sounds like a bargain to me
1989 - Volvo 360 GLT
1985 - Volvo 360 GLS
2008 - Volvo S60 SE Lux

Nimminz
Posts: 1669
Joined: 11 Jun 2010 10:56 pm
Location: Durham City, NE England, UK
Contact:

Re: Collection of big mechanical bits for 300s

Post by Nimminz » 14 Aug 2011 10:17 pm

Have any volvo floor trays to fit a mk3? black preferable :)
Mk2 360 rear silencer, as i understand they dont have the stupid loop thing going on like the mk3 one but join the centre pipe in the same place / way
mk 3 black plastic inserts for colour coded bumpers? might be after a spare set so i can spray em gloss black
'88 360 +T LSD - sold
'87 760 TDI (D24TIC) - sold
'04 V40 D sport (F9Q, decat, Remapped, launch control)
'89 740 SE (b230ft, 12psi, V-cam, headwork, 'remapped', banded steels)
'86 340 DL 1.4

User avatar
SteveP
*** V3M DONOR ***
Posts: 7943
Joined: 21 Sep 2004 12:45 pm
Location: Coventry, UK

Re: Collection of big mechanical bits for 300s

Post by SteveP » 14 Aug 2011 10:21 pm

If John doesnt I have a MK2 360 rear silencer, not Volvo but new
1989 - Volvo 360 GLT
1985 - Volvo 360 GLS
2008 - Volvo S60 SE Lux

Nimminz
Posts: 1669
Joined: 11 Jun 2010 10:56 pm
Location: Durham City, NE England, UK
Contact:

Re: Collection of big mechanical bits for 300s

Post by Nimminz » 14 Aug 2011 10:24 pm

not being volvo don't bother me, just after something that isn't stupidly designed like the mk3 but is standard on the noise front. If he doesn't i'll get back to you
'88 360 +T LSD - sold
'87 760 TDI (D24TIC) - sold
'04 V40 D sport (F9Q, decat, Remapped, launch control)
'89 740 SE (b230ft, 12psi, V-cam, headwork, 'remapped', banded steels)
'86 340 DL 1.4

User avatar
andy_h
Posts: 85
Joined: 29 Aug 2010 02:44 am
Location: watford

Re: Collection of big mechanical bits for 300s

Post by andy_h » 14 Aug 2011 10:54 pm

have you got a stereo housing and surround?
Image

sammysideways
Posts: 250
Joined: 27 May 2011 04:47 pm

Re: Collection of big mechanical bits for 300s

Post by sammysideways » 14 Aug 2011 11:17 pm

Can i call 2nd dibs on the alleycats :D

Anyways, Have you got:

Early front anti roll bar
Drivers side wing from 5 door
Bolt on panel links b pillars in the roof

I know its unlikely but thought id ask

User avatar
foggyjames
*** V3M DONOR ***
Posts: 9361
Joined: 29 Jan 2004 04:20 am
Location: Nottingham, UK

Re: Collection of big mechanical bits for 300s

Post by foggyjames » 15 Aug 2011 02:39 am

If John doesn't have floor trays or the early ARB, I do. Obviously I'm only going to stick my oar in if John *doesn't* have them...

343 sounds like a bargain.

Are the boxes from injection or carb cars, John? Ought to collect a couple of diffs and at least one spare box come turbo-time. The TT in the 343 is noisy, too, so should probably think about a spare. I have one spare, but that's clearly not enough...!

cheers

James
VOC 300-series Register Keeper
'89 740 Turbo Intercooler
'88 360 Turbo Intercooler
'85 360 GLT
'81 343 GLS R-Sport
'79 343 DL
'70 164
...and some modern FWD nonsense to get me to work...

sammysideways
Posts: 250
Joined: 27 May 2011 04:47 pm

Re: Collection of big mechanical bits for 300s

Post by sammysideways » 15 Aug 2011 06:01 pm

also need the bodypanel that sits under the grill, the long thin one if youve got one?

User avatar
bogbasic
Posts: 1863
Joined: 21 Nov 2004 10:12 pm
Location: New Malden, Surrey.
Contact:

Re: Collection of big mechanical bits for 300s

Post by bogbasic » 15 Aug 2011 11:24 pm

Hello, do you have a silver-grey bonnet pref. vgc?? Bests, bogbasic.
1988 340 1.4 GL, 218k, 5 door (Grey Bess). Gone to CBA.
1991 340 1.7 GL, 64k, 5 door, petrol blue (Deep Blue).
1988 360 2.0 GLE, 140k, 5 door, ocean blue metallic (Blue Bess).
1989 340 1.7 GL, 108k, 3 door (Red Ness).
More info here!

theo2468
Posts: 1417
Joined: 11 Oct 2010 02:34 am
Location: cornwall

Re: Collection of big mechanical bits for 300s

Post by theo2468 » 17 Aug 2011 06:19 pm

filthyjon let me know about the 343 when your readdy to sell, intrested cheers
C25 ECV-1985-Mk2 340GL-Kessy
A889 VUY-1983-Mk2 360GLS-RUF
volvosneverdie wrote:Vnd says:
diffs, are like pubs and legs.
Best appreciated when open.
I probably should have specified ladies legs in there too. [+=] "embarrarrased emoticon"[].com

Post Reply