340 1.7 parts

Post by **foggyjames** » 10 Jan 2008 02:01 am

What Redline bits do you want, Will? Check which side piece you need...I think they're both there.

The seats should be available Jay. Chris was mumbling about having them, but I'm not sure how keen he really was....Chris?

cheers

James

Post by **Chris_C** » 10 Jan 2008 02:05 am

I'd swapsie the entire set for a full blueline drivers... theres some **$£ of a 700 driver going round with what should be mine!

Post by **filthyjohn** » 10 Jan 2008 02:21 pm

Could do with a rear submember (the bit I've clumsily highlighted in green here)

I cut a big piece out of my spare (don't ask why).
Could be easier to remove and refit if I have the whole front suspension assembly from struts to hubs. Not sure how practical that is with regard to the difficulty of then scrapping the car with no front wheels...

Post by **foggyjames** » 10 Jan 2008 07:19 pm

That might be a tall ask. We're pulling the struts, but only once it's on the trailer...

We'll see, and will certainly pull it if we can

cheers

James

Post by **J340GLT** » 10 Jan 2008 08:07 pm

I'd swapsie the entire set for a full blueline drivers... theres some **$£ of a 700 driver going round with what should be mine!

Meaning Chris?

I've got the full redline interior in the 1.7 its just the dirvers seat is worn

Post by **kaos** » 10 Jan 2008 08:26 pm

I'll still have the A piller trims:)

edit: and the centre console paneling if possible aswell fromt he heaters down to the ashtray that entire bit would be nice:)

Post by **foggyjames** » 11 Jan 2008 01:07 am

What exactly do you mean....the fascia, or the 'frame' which supports it. My memory is that neither are trivial to remove...

cheers

James

Post by **Chris_C** » 11 Jan 2008 03:34 am

Jay, I've got a blueline interior in mine, aside from the drivers seat, which is standard GLT. I was tempted it to swap it for the complete redline set, but I'm not sure yet, if I don't, then sure they'll be going.

And what I was meaning was I'd swap the entire redline interior for a single blueline drivers seat!

Post by **germ** » 11 Jan 2008 12:14 pm

ok, so my little list :

2 complete headlights if in good condition
a couple of central locking motors (rear)
Drivers door handel outside bit
spoiler bit on the left looking from the front of car (or drivers side from inside)

let us know if you have any of these bits and what kind of money your looking for, also how can i pay you? paypal will be long as i would have to e-cheque, or i can send by post a cheque which is also long lol.

cant think of anything else i might need atm think thats pritty much it.

Cheers
will

Post by **germ** » 11 Jan 2008 01:15 pm

just thought of another thing, the boot strut things that hold the boot up i need a couple of those too if they work.

Cheers again,

Will

Post by **foggyjames** » 11 Jan 2008 06:31 pm

I think we can manage something like that! Paypal is probably best...I have time

How do you propose I get this stuff to you?

cheers

James

Post by **kaos** » 11 Jan 2008 08:53 pm

foggy the hole frame would be prefered whether you cut it out of the dash or what i dont care

Post by **germ** » 11 Jan 2008 09:07 pm

mhh, didnt think of that

well your 114 miles 2hour trip from me maybe i could pop round if you want, or post?

Cheers
will

Post by **greenvan** » 11 Jan 2008 10:46 pm

Hello Foggy and company!
I 've posted you a seperate email as well
but I'm after the headlining for my red 340 4 door saved last year from being crushed. Decided to do up my blue 2 door!

Post by **Cornholio** » 12 Jan 2008 09:19 pm

trabitom99 wrote:Poor Gavin, I hope he's not reading all of this I wouldn't, I tend to get attached to my motors ...

Well, it's nice to know that some use is being made of the old boy. I've grown rather fond of the 940 and all in all consider it to be a Good Move.

Tom, I have the centre piece of the front spoiler sat behind my bike. I meant to put it into the car before James took it away, but forgot. It has a small bit of plastic missing around one of the fixing holes (will get a photo once it is light), but otherwise is OK. Let me know if you're still interested (so long as that is OK with James and Chris).

foggyjames wrote:What Redline bits do you want, Will? Check which side piece you need...I think they're both there.

The piece on the driver's side (that Will is after) is still there. The other one rotted off and was donated to another 300.

James & Chris: Sorry to leave you without those couple of bits.

340 1.7 parts

Foggy's breaker