Parting out 1.7 3 door
Posted: 17 Aug 2010 06:31 pm
Parting out due to terminal rust
most parts available or would sell complete
most parts available or would sell complete
http://www.volvo300mania.com/uk/forum/
Parting out 1.7 3 door
http://www.volvo300mania.com/uk/forum/viewtopic.php?f=8&t=10430
Page 1 of 2
Re: Parting out 1.7 3 door
Posted: 17 Aug 2010 07:47 pm
The drivers side door pull/pocket thing if it's not cracked and brittle like they all seem to be.
Re: Parting out 1.7 3 door
Posted: 17 Aug 2010 08:02 pm
Will look and see. I think it is ok
Re: Parting out 1.7 3 door
Posted: 18 Aug 2010 12:05 am
emails sent mate.
Re: Parting out 1.7 3 door
Posted: 31 Aug 2010 04:55 pm
Hi Dai.
E-mail sent.
Cheers Mark.
E-mail sent.
Cheers Mark.
Re: Parting out 1.7 3 door
Posted: 01 Sep 2010 10:01 pm
Hi,
Could you pm/e-mail me a price for drivers side wing, headlight and indicator. Plus radiator if it's good. Cheers.
Could you pm/e-mail me a price for drivers side wing, headlight and indicator. Plus radiator if it's good. Cheers.
Re: Parting out 1.7 3 door
Posted: 03 Sep 2010 12:34 am
I need the rear bumper mounts but they can be a pig to get off. Let me know if you could be bothered or if they are knackered.
Re: Parting out 1.7 3 door
Posted: 03 Sep 2010 08:41 am
I'm still after a rear leaf spring bracket, if yours are OK Dai ...
http://www.volvo300mania.com/forum-uk/v ... f=9&t=9676
Cheers
Tom
http://www.volvo300mania.com/forum-uk/v ... f=9&t=9676
Cheers
Tom
Re: Parting out 1.7 3 door
Posted: 13 Oct 2010 11:45 am
The backend is very rusty so not much of any use there.
Front wings also rusty
I have stripped off the good 5 speed box. Available
Good rear axle
some engine parts
heater blower box
front suspension
spedo head (no extra gauges)
Front wings also rusty
I have stripped off the good 5 speed box. Available
Good rear axle
some engine parts
heater blower box
front suspension
spedo head (no extra gauges)
Re: Parting out 1.7 3 door
Posted: 13 Oct 2010 01:38 pm
Looking for some 1.7 engine conversion parts. Depending on price and delivery time.
Re: Parting out 1.7 3 door
Posted: 23 Oct 2010 06:54 pm
Hi,
Is diff different between 340 and 360 gearbox?
I would like to find out how big it is.
I would like to see if they are any similar to other cars' diff.
I would like to see if I can get LSD cheap in anyway.
Cheers
Atchi
Is diff different between 340 and 360 gearbox?
I would like to find out how big it is.
I would like to see if they are any similar to other cars' diff.
I would like to see if I can get LSD cheap in anyway.
Cheers
Atchi
Re: Parting out 1.7 3 door
Posted: 23 Oct 2010 08:35 pm
I do have most of the conversion parts. What do you need exactly?Bossie wrote:Looking for some 1.7 engine conversion parts. Depending on price and delivery time.
Re: Parting out 1.7 3 door
Posted: 23 Oct 2010 08:36 pm
I think the diff is the same but the crown wheel and pinion I think are different. Perhaps someone here knows for sure???miniswift wrote:Hi,
Is diff different between 340 and 360 gearbox?
I would like to find out how big it is.
I would like to see if they are any similar to other cars' diff.
I would like to see if I can get LSD cheap in anyway.
Cheers
Atchi
Re: Parting out 1.7 3 door
Posted: 23 Oct 2010 09:03 pm
diff ratio's: http://www.volvo300mania.com/forum-uk/v ... f=6&t=8625
allways swap diff + housing, there are 35 different size shims for the diff's crown/pignon adjustment so you're very, very likely to fail if you swap just the diff...
allways swap diff + housing, there are 35 different size shims for the diff's crown/pignon adjustment so you're very, very likely to fail if you swap just the diff...
Re: Parting out 1.7 3 door
Posted: 24 Oct 2010 02:22 pm
Will the gearbox fit a 360 2.0 GLT?
My mate needs one asap.
If so, how much delivered?
My mate needs one asap.
If so, how much delivered?