Page 1 of 1

a few big bits

Posted: 26 Nov 2010 08:14 pm
by mat_91
right ive decide there's are doing my head in so come get what you want
all bits are of my volvo so its been abused as a dialy .drifter
1.4 engine smoked a tiny bit when first started but didn't continue was a good powerful 1.4 about 70k
newish clutch and bell housing gearbox out of same car was all working when taken out sadly only got open diff with it
1.4 prop ok condition
1.4 carb + manifold airbox in ok condition but would need a rebuild it didnt want to tick over when cold but fine after 30sec ish
1.4 renuix unit good
drive shafts need outer c.v joints thou
2" lowering blocks used
price wise just make me a offer im not after loads if no body wants them there going to get weighted in
all parts are in used condition but removed from my daily/drifter so are in used condition the car had just under 70k on it so im not giving any warranty on parts as they have came out a drifter but i took good care of it
any questions just ask

Re: a few big bits

Posted: 26 Nov 2010 11:38 pm
by jon-ovlov
how much would you want for the blocks?

Re: a few big bits

Posted: 27 Nov 2010 09:47 am
by kaos
same for propshaft? delivered might be able to collect on my way back from uni in a couple of weeks aswell

Re: a few big bits

Posted: 27 Nov 2010 11:12 am
by theo2468
2nds on the blocks

Re: a few big bits

Posted: 27 Nov 2010 08:04 pm
by mat_91
you lot have pms

Re: a few big bits

Posted: 30 Nov 2010 12:16 pm
by filthyjohn
Can you post the 1.4 manifold? Don't need the carb but I do need the thermal spacer dealie that goes underneath it.

Re: a few big bits

Posted: 30 Nov 2010 02:55 pm
by 13431
What renix is it mate ??

cheers

Re: a few big bits

Posted: 30 Nov 2010 03:54 pm
by mat_91
i could post the gasket out but at them moment im struggling to even more we must have got at least 10-13cm of snow jsut fell
pm me details and ill try and sort summet out delivery wise etc

and ill find out the renuix number

Re: a few big bits

Posted: 18 Dec 2010 02:28 pm
by 13431
have you got a working starter motor ??

cheers

adam.