Bolts, Gaskets & other Bits

Put here your advertisements to sell cars and parts
User avatar
Duvel78
Website Admin
Posts: 2260
Joined: 29 Dec 2003 01:33 am
Location: Country of Duvel beer > Belgium <
Contact:

Re: Bolts, Gaskets & other Bits

Post by Duvel78 » 06 Jun 2012 04:57 pm

Oh dear... This topic was made for me :D Mac, expect an order from me :wink:
Collection: '78 343 Black Beauty, '82 345 GLS, '83 340 DL 2.0, '84 340 DL vario, '88 360 GLT 5d (2x) & 4d (2x), '89 GLT, '91 340 vario
Dad's cars: '87 340 vario, '89 340 vario
Lot of donors cars and parts...
V3M for life!

User avatar
mac
Posts: 1403
Joined: 19 Apr 2006 11:02 am
Location: Needham Market U.K.

Re: Bolts, Gaskets & other Bits

Post by mac » 07 Jun 2012 08:43 am

Hi Aymat,

I will have supplies at the BKV (along with RJ and Dai (ClassicSwede) who will have their bits).

Mac.
88 5door Redline 1.7 52k - 19 XC60 Momentum Pro D4 AWD 17k
1950 pair of legs that don't work very well.

tattooer
Posts: 82
Joined: 28 Jul 2012 09:47 pm

Re: Bolts, Gaskets & other Bits

Post by tattooer » 12 Aug 2012 08:21 am

hi, can you message me a address to post to.. il send a postal order and a list (long) of what i need thanks j

wolfpack
Posts: 41
Joined: 16 Dec 2011 02:07 pm

Re: Bolts, Gaskets & other Bits

Post by wolfpack » 10 Oct 2012 06:24 pm

Drive shaft bolts....all of them....now...plz

no i joke but thank god iam on my last 24 and have no more spar can i get a full set of 24 plz

theo2468
Posts: 1417
Joined: 11 Oct 2010 02:34 am
Location: cornwall

Re: Bolts, Gaskets & other Bits

Post by theo2468 » 30 Dec 2012 10:56 pm

Hi mac was wandering if you do the gasket which goes between the diff and the gearbox? Cheers theo
C25 ECV-1985-Mk2 340GL-Kessy
A889 VUY-1983-Mk2 360GLS-RUF
volvosneverdie wrote:Vnd says:
diffs, are like pubs and legs.
Best appreciated when open.
I probably should have specified ladies legs in there too. [+=] "embarrarrased emoticon"[].com

User avatar
trabitom99
*** V3M DONOR ***
Posts: 4398
Joined: 06 Jan 2007 02:38 pm
Location: Bonn, Germany

Re: Bolts, Gaskets & other Bits

Post by trabitom99 » 31 Dec 2012 09:37 am

Hi Theo,

that gasket could well still be available from Volvo, as its a part common to V200s:

http://www.volvo300mania.com/forum-uk/v ... 3&start=28
http://www.skandix.de/en/spare-parts/dr ... n/1032153/

Cheers

Tom
343 GL Touring B14.1E CVT (155) 98000kms 1980 (sold)
343 L Junior B14.3E MT4 (155) 229000kms 1981 (scrapped)
343 DLS B19A MT4 (155) 167900kms 1982
360 GL Injection B200F MT5 (231) 348598kms 1988 (scrapped)
360 GLT B200F MT5 (302) 230000kms 1988

Nimminz
Posts: 1669
Joined: 11 Jun 2010 10:56 pm
Location: Durham City, NE England, UK
Contact:

Re: Bolts, Gaskets & other Bits

Post by Nimminz » 04 Jan 2013 11:38 am

It is, I ordered one along with a input shaft cover gasket from my local volvo dealer a couple of weeks ago
'88 360 +T LSD - sold
'87 760 TDI (D24TIC) - sold
'04 V40 D sport (F9Q, decat, Remapped, launch control)
'89 740 SE (b230ft, 12psi, V-cam, headwork, 'remapped', banded steels)
'86 340 DL 1.4

User avatar
mrborrie
Posts: 240
Joined: 06 Jul 2010 08:17 am
Location: Netherlands

Re: Bolts, Gaskets & other Bits

Post by mrborrie » 07 Jan 2013 03:00 pm

This stuff would be interesting for my race car ...
764 Turbo 86'|Volvo 144 72|Volvo 360 86'||Volvo 360 GLS 85'|242 77"|
Website: http://www.brick-autosport.com
Facebook: http://www.facebook.com/pages/Brick-Aut ... 98?sk=wall"

User avatar
mac
Posts: 1403
Joined: 19 Apr 2006 11:02 am
Location: Needham Market U.K.

Re: Bolts, Gaskets & other Bits

Post by mac » 10 Jan 2013 09:06 pm

UPDATE

The speedo drive/hub bearing cap "E" clip is now replaced by the correct OE "eared" KLM clip @ £0.40

I now stock the correct B172 manifold to down pipe studs (M8x42x1.25) with CU flashed self locking nuts @ £1.50 (two studs with nuts).

Mac.
88 5door Redline 1.7 52k - 19 XC60 Momentum Pro D4 AWD 17k
1950 pair of legs that don't work very well.

User avatar
mac
Posts: 1403
Joined: 19 Apr 2006 11:02 am
Location: Needham Market U.K.

Re: Bolts, Gaskets & other Bits

Post by mac » 11 Jan 2013 04:16 pm

UPDATE

Now stocked,

KLM clip for integral spring retention on B14 throttle cable and adjustment of B172k throttle cable. £0.50

Mac.
88 5door Redline 1.7 52k - 19 XC60 Momentum Pro D4 AWD 17k
1950 pair of legs that don't work very well.

scamparoo
Posts: 38
Joined: 15 Nov 2012 06:42 pm

Re: Bolts, Gaskets & other Bits

Post by scamparoo » 08 Apr 2013 11:10 pm

Do you make inlet gaskets for a f7p engine?

User avatar
mrborrie
Posts: 240
Joined: 06 Jul 2010 08:17 am
Location: Netherlands

Re: Bolts, Gaskets & other Bits

Post by mrborrie » 10 Feb 2014 09:08 pm

Do you have the steeringrack bolts and nuts, i just cut the ones of my new racer... now its ziptied dont know if FIA wil allow me to race like that..
764 Turbo 86'|Volvo 144 72|Volvo 360 86'||Volvo 360 GLS 85'|242 77"|
Website: http://www.brick-autosport.com
Facebook: http://www.facebook.com/pages/Brick-Aut ... 98?sk=wall"

User avatar
mac
Posts: 1403
Joined: 19 Apr 2006 11:02 am
Location: Needham Market U.K.

Re: Bolts, Gaskets & other Bits

Post by mac » 10 Feb 2014 09:20 pm

I presume you mean the two bolts/nuts through the pinion housing, and the two that secure the saddle (U) clamp on a manual? rack.
Not specifically but I will see if I can match a set from my stock - I will get back to you as soon as I can.

Can't imagine the FIA accepting a rack secured with zipties.

All the best - Mac.
88 5door Redline 1.7 52k - 19 XC60 Momentum Pro D4 AWD 17k
1950 pair of legs that don't work very well.

User avatar
mrborrie
Posts: 240
Joined: 06 Jul 2010 08:17 am
Location: Netherlands

Re: Bolts, Gaskets & other Bits

Post by mrborrie » 10 Feb 2014 10:49 pm

mac wrote: Can't imagine the FIA accepting a rack secured with zipties.

All the best - Mac.
yes that was a joke :-) i need some of those bolts in hard specs, they always go numb
764 Turbo 86'|Volvo 144 72|Volvo 360 86'||Volvo 360 GLS 85'|242 77"|
Website: http://www.brick-autosport.com
Facebook: http://www.facebook.com/pages/Brick-Aut ... 98?sk=wall"

User avatar
mac
Posts: 1403
Joined: 19 Apr 2006 11:02 am
Location: Needham Market U.K.

Re: Bolts, Gaskets & other Bits

Post by mac » 11 Feb 2014 05:00 pm

mrborrie - you have been PM'd

Mac.
88 5door Redline 1.7 52k - 19 XC60 Momentum Pro D4 AWD 17k
1950 pair of legs that don't work very well.

Post Reply