Bolts, Gaskets & other Bits

Put here your advertisements to sell cars and parts
User avatar
mac
Posts: 1403
Joined: 19 Apr 2006 11:02 am
Location: Needham Market U.K.

Bolts, Gaskets & other Bits

Post by mac » 23 Feb 2012 05:12 pm

Afternoon all,

My name is Mac and I'm a boltaholic!

Many of you will know that I have been looking at bolts with a view to the possible supply of same.
Using my past experience and my findings during the resto. of my 300 I have looked first at bolts
which are 1. NLA from Volvo, 2. Suffer in service (corrosion/rounding off) and 3. Those that are
difficult and expensive to source in small quantities ie. Metric Fine/ Superfine. My efforts are
starting to bear fruit and I am now in a position to supply the following:-

Front wishbone inner bush bolt @ £0.60 each & nut £0.12 each. (2 of each needed per car)

Image

Torque rod to wishbone /bottom ball joint bolt @ £0.20 each & nut @ £0.10 each (6 of each needed per car).

Image

Brake disc to hub inhex cap screws - I have upgraded these to 12.9 @ £0.55 each (8 needed per car)

Image

ARB front mounting bolts (supplied as inhex cap screws) @ £0.08 each (4 needed per car)

Image

Rear engine mount bracket to axle bolts (supplied as inhex cap screws) @ £0.09 each (6 needed per car)

Image

Driveshaft CV joint cap screws - I have upgraded these to 12.9 @ £0.40 each (24 needed per car). Since I have
brought these into stock I find Robbert Jan is also going to carry the equivalent (I will not tread on his toes so I
am unlikely to re-stock without his agreement).

Image

Engine mount flange nuts - I will supply as serrated locking type @ £0.06 each (8 needed per car)

Image

B14 exhaust manifold to downpipe studs @ £0.60 each & nuts (copper flashed self locking) @ £0.30 each (3 of each needed per car)

Image

All the above prices are Exclusive of P&P.

Shortly I shall stock M12, M10, & M8 YZP Nylocks , flat washers, sump plug washers, and fuel filters.

Watch this space. Boltshop Rules.

Image

Mac.
88 5door Redline 1.7 52k - 19 XC60 Momentum Pro D4 AWD 17k
1950 pair of legs that don't work very well.

User avatar
Speedy88
Posts: 4057
Joined: 04 May 2009 11:52 pm
Location: Bristol

Re: Bolts

Post by Speedy88 » 23 Feb 2012 07:27 pm

Yaaay, good job mac :)

In the near future could you start doing prop and torque tube clamp bolts?
'88 340 Williams (Sold)
'85 360 GLS - Drift project (Sold)
'77 Colt Sigma
'96 940 Drift project

User avatar
SteveP
*** V3M DONOR ***
Posts: 7933
Joined: 21 Sep 2004 12:45 pm
Location: Coventry, UK

Re: Bolts

Post by SteveP » 23 Feb 2012 08:29 pm

Legendary
1989 - Volvo 360 GLT
1985 - Volvo 360 GLS
2008 - Volvo S60 SE Lux

Attack2001
Posts: 1015
Joined: 05 Jun 2011 03:45 pm
Location: Rochester, Kent
Contact:

Re: Bolts

Post by Attack2001 » 23 Feb 2012 09:33 pm

How much for a set for bothsides, of the lower arm inner bolts and the lower arm ball joint/compression rod bolts posted please :) Thomas....................
Image

User avatar
Hell Driver
Posts: 1415
Joined: 18 Aug 2009 09:58 pm
Location: Doncaster UK

Re: Bolts

Post by Hell Driver » 23 Feb 2012 09:39 pm

Great work, will be requiring anything relevant to my project, no hurry so will get a list together before the 2012 VOC BKV
360 GLE Saloon (D 86)
360 GLS (A 84)
343 DL (W 80) :-)
340 GL 1.7 (G 89)
360 GLS (Y 83)
440 Turbo (J 92)
Transit Tipper 125 T350 (02)Alive Again!
Transit Tipper Smiley face Q reg
Mitsubishi Colt 1.1 (54)
R.I.P. 77 343 DL vario :-(

User avatar
mac
Posts: 1403
Joined: 19 Apr 2006 11:02 am
Location: Needham Market U.K.

Re: Bolts

Post by mac » 24 Feb 2012 01:16 pm

A'ternoon all.

1. Speedy - No - Robbert Jan already supplies them @ 1 EUR each, and I won't tread on his toes.

I will order a batch from him and will supply at his price. (they are the same bolt by the way 3293921).

2. Attack - I will PM you.

3. Andy - just let me know what you need (I will have my "wares" at the BKV).

Mac.
88 5door Redline 1.7 52k - 19 XC60 Momentum Pro D4 AWD 17k
1950 pair of legs that don't work very well.

User avatar
Speedy88
Posts: 4057
Joined: 04 May 2009 11:52 pm
Location: Bristol

Re: Bolts

Post by Speedy88 » 24 Feb 2012 03:14 pm

Ah of course! Thanks for the info.
'88 340 Williams (Sold)
'85 360 GLS - Drift project (Sold)
'77 Colt Sigma
'96 940 Drift project

User avatar
mac
Posts: 1403
Joined: 19 Apr 2006 11:02 am
Location: Needham Market U.K.

Re: Bolts

Post by mac » 25 Feb 2012 12:59 pm

UPDATE

When supplying the torque rod/bottom ball joint bolts I will include 10mm flat washers
(x4 off) to be fitted as shown below.

Image

I can now add to my stock:-

M12, M10, M8, YZP Nylocks (8.8) @ £0.12, £0.10, & £0.06
and M12,10,8 YZP flat washers @ £0.06, £0.04, & £0.02.

Image

Sump plug washers for B14 & B172 @ £0.40

Image

And "universal" (for carburettor cars) fuel filters @ £1.80

Image

Mac.
88 5door Redline 1.7 52k - 19 XC60 Momentum Pro D4 AWD 17k
1950 pair of legs that don't work very well.

User avatar
mac
Posts: 1403
Joined: 19 Apr 2006 11:02 am
Location: Needham Market U.K.

Re: Bolts

Post by mac » 28 Feb 2012 02:52 pm

UPDATE

Added to stock,

M10 x 1.25 (M fine) YZP 8.8 Nylocks (eg, torque reaction/tie rod nut)
@ £0.40 each + p&p. (sorry - M fine is a lot more expensive).

Still working on hub nuts and caliper carrier bolts - and if anybody can suggest anything
else I should try to stock please let me know.

Mac.
88 5door Redline 1.7 52k - 19 XC60 Momentum Pro D4 AWD 17k
1950 pair of legs that don't work very well.

Nimminz
Posts: 1669
Joined: 11 Jun 2010 10:56 pm
Location: Durham City, NE England, UK
Contact:

Re: Bolts

Post by Nimminz » 29 Feb 2012 12:46 am

This sounds very good!!

Shame I've just renewed all the front suspension bolts or I'd have bourght them from you. Looks like I'll be taking the bottom balljoint bolts out and putting the washers on the right side lol.
'88 360 +T LSD - sold
'87 760 TDI (D24TIC) - sold
'04 V40 D sport (F9Q, decat, Remapped, launch control)
'89 740 SE (b230ft, 12psi, V-cam, headwork, 'remapped', banded steels)
'86 340 DL 1.4

User avatar
mac
Posts: 1403
Joined: 19 Apr 2006 11:02 am
Location: Needham Market U.K.

Re: Bolts

Post by mac » 13 Mar 2012 05:25 pm

Until we have a "list of suppliers" facility (Wiki perhaps) could a mod sticky this for me plse.

Mac.
88 5door Redline 1.7 52k - 19 XC60 Momentum Pro D4 AWD 17k
1950 pair of legs that don't work very well.

User avatar
mac
Posts: 1403
Joined: 19 Apr 2006 11:02 am
Location: Needham Market U.K.

Re: Bolts, Gaskets & other Bits

Post by mac » 05 Apr 2012 04:39 pm

UPDATE

I have revised the bolts for the wishbone/bottom balljoint - the factory supplied these as 3 (per side) M10 x 35
which leads due an untidy arrangement as ideally 3 differing lengths are needed. the pic illustrates this.

Original bolts,

Image

In future I shall supply (as a single side kit) 1 M10x30, 1 M10x35, 1 m10x40, 3 nylocks and 4 washers,

Revised bolts,

Image

Price increases slightly to £1.15 (from £1.06)

A clip that is always going missing is the e clip that retains the speedo drive into the n/s hub bearing cap.
£0.10 + P&P.

Image

"Later" water pumps on B14s (83 on) always seem to cover their fixing bolts in in alloy corrosion products
this is a set of replacement bolts and washers.
£1.00 per set + P&P.

Image


B14.4E gasket between the air cleaner and the carburettor - often replaced by home cut squashy rubber. now available
at £1.20 + P&P. Factory original for comparison.

Image
88 5door Redline 1.7 52k - 19 XC60 Momentum Pro D4 AWD 17k
1950 pair of legs that don't work very well.

User avatar
Speedy88
Posts: 4057
Joined: 04 May 2009 11:52 pm
Location: Bristol

Re: Bolts, Gaskets & other Bits

Post by Speedy88 » 05 Apr 2012 05:43 pm

A clip that is always going missing is the e clip that retains the speedo drive into the n/s hub bearing cap.
I had no idea they even existed :shock:
'88 340 Williams (Sold)
'85 360 GLS - Drift project (Sold)
'77 Colt Sigma
'96 940 Drift project

Nate
Posts: 46
Joined: 14 Feb 2012 12:11 am

Re: Bolts, Gaskets & other Bits

Post by Nate » 18 May 2012 08:42 pm

Need a Gearbox-diff Gasket

Can you supply them ?

Thanks

User avatar
mac
Posts: 1403
Joined: 19 Apr 2006 11:02 am
Location: Needham Market U.K.

Re: Bolts, Gaskets & other Bits

Post by mac » 18 May 2012 09:49 pm

Hi Nate,
I have not yet considered that because:-
M47R to Diff gasket - still available from Volvo - pt.no.1340993 £5.90 + vat.

When it becomes NLA I will look seriously at including it.

ATB - Mac
88 5door Redline 1.7 52k - 19 XC60 Momentum Pro D4 AWD 17k
1950 pair of legs that don't work very well.

Post Reply