Page 1 of 1
340 1.4 GL + 4AGE *Breaking*
Posted: 28 May 2012 07:17 pm
by hillmanjames
Breaking my 4age engine swapped 340gl
Have the complete engine and a custom prop shaft for sale
Any parts that you want, just email me on
jrweightman@gmail.com for more info
Full advert here:
http://retrorides.proboards.com/index.c ... ead=130311
Re: 340 1.4 GL + 4AGE *Breaking*
Posted: 28 May 2012 09:08 pm
by jon-ovlov
I will have the prop. If I could pay you a deposit of some sort to hold it that'd be great. Let me know if thats possible.

Re: 340 1.4 GL + 4AGE *Breaking*
Posted: 28 May 2012 10:08 pm
by Speedy88
Hi,
I need all these parts. How much for them posted?
Radius arm
Drivers side wishbone
I also need a steering collumn - not so urgent right now
Re: 340 1.4 GL + 4AGE *Breaking*
Posted: 28 May 2012 11:06 pm
by volvosneverdie
Sorry to see this broken, but itll be cool if it can keep Crashy88s car on the road.
Re: 340 1.4 GL + 4AGE *Breaking*
Posted: 29 May 2012 07:46 pm
by MCHUDD
Hi Ben
Wasn,t that your old sticker bombed motor?
Cheers Mark.

Re: 340 1.4 GL + 4AGE *Breaking*
Posted: 29 May 2012 10:31 pm
by volvosneverdie
MCHUDD wrote:Hi Ben
Wasn,t that your old sticker bombed motor?
Cheers Mark.

Yup. It sure is. Well spotted Mark.
Re: 340 1.4 GL + 4AGE *Breaking*
Posted: 29 May 2012 11:26 pm
by Jak
How much for the steering wheel?
Re: 340 1.4 GL + 4AGE *Breaking*
Posted: 30 May 2012 08:26 pm
by hillmanjames
Speedy, how does £60 including postage and the same again for the steering column sound ?
Re: 340 1.4 GL + 4AGE *Breaking*
Posted: 31 May 2012 02:11 pm
by Speedy88
PM'd

Re: 340 1.4 GL + 4AGE *Breaking*
Posted: 02 Jun 2012 09:09 pm
by hillmanjames
Bump!
Need bits to go to good homes!

Re: 340 1.4 GL + 4AGE *Breaking*
Posted: 05 Jun 2012 12:25 pm
by Nimminz
Hi mate, could you get me a closer picture of the lower driver's side air vent and the windscreen vents in the dash
Might be after them if they are the right ones. The vent slider needs to be the flat-tooth style not the spikey tooth style. and i think the vents on the top are held in by a screwed on plate behind rather than bent over clips
Re: 340 1.4 GL + 4AGE *Breaking*
Posted: 08 Jun 2012 01:58 am
by filthyjohn
How much for the engine mate? For a friend with an mr2.