************* OFFERS ON ALL PARTS************************


breaking with a heavy heart, but due to lack off time to use and having the cash would be useful for my garage I have decided to do it. Most parts are very new and covered less than 200 miles , some are brand new like the 5 link rear that have covered 0 miles. Prices reflect the quality and age of the item , most of these parts are custom or adapted to the car many are extremely rare or unique . large items are ono , cash talks and no dreamers or messers . Also i dont care if you think it is expensive , go out and build this car and see what it costs you

car is located in dartford kent

some postage available at extra cost

Engine

F7p
Head gasket changed blew between cylinders
ported and polished head
skimmed head
all valves lapped in
very clean and golden inside the engine
all new gaskets
new thermostat
new cambelt and water pump £275

vgc flywheel and new clutch £40

spare vgc pistons, rods and crank £40

mocal 13 row oil cooler (front mounted with thermostatic sandwich plate) £110

new mandrel bent front pipe 2.25 stainless steel £60

complete Bandit 1200cc Bike carbs set up (on custom manifold), Facet fuel pressure reg set to 1psi, facet reusable fuel filter varley fuel pump and high pressure line £425

twin radiator fans £40

vgc radiaor £25

powdercoated headlight brackets £15

headlights £5 each

custom water system (sealed system with only 4 hoses and no expansion bottle and in hose rad. cap) £80

Williams exhaust manifold £60

full stainless exhaust motor bike back box £120

bell housing £35

prop shaft £60

welded diff gearbox good in all gears and v quiet £50 (no front mounts)

drive shaft £20 a pair

spare rocker box £10

bmw uprated engine and gearbox mounts and modified gearbox brackets £45



Suspension

GAZ custom fully adjustable coilovers with 200sx front adjustable top mounts £450 (covered about 30 miles)

Poly arb bushes £15

poly arb link rods £15

brand new GAZ coilovers fully adjustable new panhard rod set up , fully rose jointed, fully adjustable £750


S.V.A Hi Spec rear calipers , custom rear hubs with disc conversion . longer studs for wheel spacers . 400 for complete conversion inc. modified handbrake cables

custom bay power loom £25

variomatic front bumper grills £25

mini washer bottle with pump £10

wiper arms that sit lower down the screen unknown £15

Plastic door cards £25

de-badged inc. front grill £25


snap off steering wheel and boss and wheel £50

6 point roll cage custom made £600

flocked dash £80

rear light loom remade from trailer loom with large plug £20

Fibre glass bonnet inc bonnet pins £120

poly windows (fronts included not yet fitted) £ 50

Battery relocated to behind passenger seat inc. new large battery, battery box and power and earth cable and through bulkhead connecter £60

white weller wheels 13 x 6 ok tyres £80

Gold centred minilight alloys 13x7 (175/50/13) like yoko's on the front Michelins on the rear now battle scared £150

***please note the seats and harness' are not included in the sale ***

ok as you can see not your average Volvo 340!

Tried to be as honest as possible but please come and view and make your own opinions .

Please no messers

located in Dartford Da1 (5mins from the dartford bridge )

Any questions please call 07809 408 482

thanks joe


http://i973.photobucket.com/albums/ae21 ... 1987-1.jpg

http://i973.photobucket.com/albums/ae21 ... G_1720.jpg

more pics available on request

Pmd

Would you take 100 for the bonnet and pins?

Is the mandrel bent front pipe to fit a standard f7p manifold??
Cheers Ben

Is the bell housing off a 1.7 or a 1.4?

much for front coiovers set m8 wb shaun

GulfPetrolHead wrote:Is the bell housing off a 1.7 or a 1.4?

Its had an f7 conversion so will be 1.7 bell housing.

This guy hasnt replied to pms, not sure where hes gone!!