Breaking Volvo 360

Put here your advertisements to sell cars and parts
User avatar
J340GLT
Posts: 909
Joined: 31 Mar 2007 06:00 pm
Location: South East London/ Kent

Breaking Volvo 360

Post by J340GLT » 29 May 2013 10:04 pm

All parts available

Torque tube - £50

Gearbox/ Diff (welded diff) - £100

Bellhousing - £50

GLT interior - £50

GLT alloys - £50

Redline Seats - £60
340 DL G Reg 1.4, Vario..3,000Miles on the clock from new!!!National BKV Runners-Up

Currently breaking a 4dr E Reg 360 GLT (Silver/ Gold) & Volvo 340 1.4 3dr (dark grey)

User avatar
trabitom99
*** V3M DONOR ***
Posts: 4398
Joined: 06 Jan 2007 02:38 pm
Location: Bonn, Germany

Re: Breaking Volvo 360

Post by trabitom99 » 30 May 2013 01:00 am

Any sunroof cables?

Cheers

Tom
343 GL Touring B14.1E CVT (155) 98000kms 1980 (sold)
343 L Junior B14.3E MT4 (155) 229000kms 1981 (scrapped)
343 DLS B19A MT4 (155) 167900kms 1982
360 GL Injection B200F MT5 (231) 348598kms 1988 (scrapped)
360 GLT B200F MT5 (302) 230000kms 1988

User avatar
J340GLT
Posts: 909
Joined: 31 Mar 2007 06:00 pm
Location: South East London/ Kent

Re: Breaking Volvo 360

Post by J340GLT » 30 May 2013 09:59 am

will have a look mate.

Dont think its working though
340 DL G Reg 1.4, Vario..3,000Miles on the clock from new!!!National BKV Runners-Up

Currently breaking a 4dr E Reg 360 GLT (Silver/ Gold) & Volvo 340 1.4 3dr (dark grey)

User avatar
SteveP
*** V3M DONOR ***
Posts: 7933
Joined: 21 Sep 2004 12:45 pm
Location: Coventry, UK

Re: Breaking Volvo 360

Post by SteveP » 30 May 2013 12:19 pm

This is going to sound a bit weird, but I'm after the threaded bar/nut that holds the heater box to the bulkhead (it's in the open hole), I dropped mine on removal and can't find it!
1989 - Volvo 360 GLT
1985 - Volvo 360 GLS
2008 - Volvo S60 SE Lux

MCHUDD
*** V3M DONOR ***
Posts: 2537
Joined: 18 May 2006 03:43 pm
Location: BELFAST UNITED KINGDOM

Re: Breaking Volvo 360

Post by MCHUDD » 30 May 2013 03:34 pm

Hi Steve.
I have loads of nuts and bolts that i have removed over the years.
If someone could put up a photo of the one you need i could
at least have a look.
Cheers Mark.
sm69 sm69 sm69 sm69 sm69

Ride_on
Posts: 2262
Joined: 26 May 2009 05:34 pm
Location: Belfast, N. Ireland

Re: Breaking Volvo 360

Post by Ride_on » 30 May 2013 07:51 pm

how are the front radius arm mounts rust wise (deep or surface)? I could use the radius/tie bars and bottom lever arms too. Willing to post to NI?
1980 345 DL_______1987 360 GLE (project car restored to GLT spec and B230FT'd)
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7

User avatar
Speedy88
Posts: 4057
Joined: 04 May 2009 11:52 pm
Location: Bristol

Re: Breaking Volvo 360

Post by Speedy88 » 31 May 2013 12:10 am

Ride_on - when you say lever arms, do you mean wishbones? Because that might be what I'm after...
'88 340 Williams (Sold)
'85 360 GLS - Drift project (Sold)
'77 Colt Sigma
'96 940 Drift project

User avatar
J340GLT
Posts: 909
Joined: 31 Mar 2007 06:00 pm
Location: South East London/ Kent

Re: Breaking Volvo 360

Post by J340GLT » 31 May 2013 07:55 pm

SteveP wrote:This is going to sound a bit weird, but I'm after the threaded bar/nut that holds the heater box to the bulkhead (it's in the open hole), I dropped mine on removal and can't find it!

should have one of those mate
340 DL G Reg 1.4, Vario..3,000Miles on the clock from new!!!National BKV Runners-Up

Currently breaking a 4dr E Reg 360 GLT (Silver/ Gold) & Volvo 340 1.4 3dr (dark grey)

User avatar
J340GLT
Posts: 909
Joined: 31 Mar 2007 06:00 pm
Location: South East London/ Kent

Re: Breaking Volvo 360

Post by J340GLT » 31 May 2013 07:56 pm

Ride_on wrote:how are the front radius arm mounts rust wise (deep or surface)? I could use the radius/tie bars and bottom lever arms too. Willing to post to NI?
yep not a prob pm me
340 DL G Reg 1.4, Vario..3,000Miles on the clock from new!!!National BKV Runners-Up

Currently breaking a 4dr E Reg 360 GLT (Silver/ Gold) & Volvo 340 1.4 3dr (dark grey)

ratdog
Posts: 16
Joined: 10 Nov 2010 05:58 pm

Re: Breaking Volvo 360

Post by ratdog » 03 Jun 2013 09:54 pm

Have you got front bumper? Might be able to pick it up depending on location

User avatar
Speedy88
Posts: 4057
Joined: 04 May 2009 11:52 pm
Location: Bristol

Re: Breaking Volvo 360

Post by Speedy88 » 04 Jun 2013 12:25 am

Can you take out the front subframe? Not bothered about the wishbones, just need the center bit.
Attachments
IMG_2018_zpsd2eced3f.jpg
IMG_2018_zpsd2eced3f.jpg (63.83 KiB) Viewed 11639 times
'88 340 Williams (Sold)
'85 360 GLS - Drift project (Sold)
'77 Colt Sigma
'96 940 Drift project

Drift-rat-jim
Posts: 65
Joined: 09 May 2012 10:46 pm

Re: Breaking Volvo 360

Post by Drift-rat-jim » 25 Jun 2013 09:26 pm

Rear axle and drums how much dude

User avatar
J340GLT
Posts: 909
Joined: 31 Mar 2007 06:00 pm
Location: South East London/ Kent

Re: Breaking Volvo 360

Post by J340GLT » 25 Jun 2013 11:05 pm

undecided as to which one to keep atm mate as Ive got a rear disc conversion and a normal set up
340 DL G Reg 1.4, Vario..3,000Miles on the clock from new!!!National BKV Runners-Up

Currently breaking a 4dr E Reg 360 GLT (Silver/ Gold) & Volvo 340 1.4 3dr (dark grey)

Dannyboy856
Posts: 4
Joined: 04 Jul 2013 07:27 am

Re: Breaking Volvo 360

Post by Dannyboy856 » 12 Jul 2013 12:53 pm

Hi,

Do you still have the 3 piece plastic spoiler from the bottom of the front valance?

Thanks,
Dan

volvomania
Posts: 641
Joined: 09 Aug 2005 02:24 pm
Location: Antwerp, Belgium

Re: Breaking Volvo 360

Post by volvomania » 12 Jul 2013 02:17 pm

I am looking for the two rubber hose sections that form the filler hose, preferably with your chassisnumber as they've changed over the years.
I believe that top and bottom can differ.
This so that BBB is getting good samples to reproduce.
Can you tell me postage to Belgium or to Suffolk?
THX
Life is a journey, so sit back and enjoy the ride!

Born Built Beauties: Parts keeping our cars on the road!

http://www.Born-Built-Beauties.eu

Post Reply