lower faster louder parts sale...

Put here your advertisements to sell cars and parts
User avatar
madseb
Posts: 345
Joined: 18 Feb 2010 09:58 am

lower faster louder parts sale...

Post by madseb » 17 Aug 2013 09:59 am

hi all,
going to be listing a few bits that im clearing out of my garage:

collection from Dagenham Essex rm10.

edge active 10" bass box with built in amp, 750w, £40
Image

360 legs, with adjustable inserts, and 70?mm lowing springs:
sold

pair of 340/360 converted suabru impresa seats, very comfortable.
on 340/360 runners, as shown in the pictures.
good condition.
£100 collected.
Image
Image

pair of blue race belts
willians 3" webbing, 5point harnesses with crotch strap although can be used without, aircraft quick release style fastner. long reach rear straps, so ideal for saloon/hatch. or similar vehicle.
clip in via eyebolts (not supplied)
had these in the saloon, and were mega kool,
£80 the pair.
Image

set of 4, fox racing alloy wheels.
4x100
15"
7" wide iirc,
unsure of offset, but came off a polo if this helps.
with tyres, although of questionable legality (i.e they will roll, hold air, and have legal tread although probably a bit old)
currently painted black (only a rattle can job, but look presentable. (ignore the overspray in the pic, this has since been removed.
have been on various cars, over the years including the drifter so various marks, no center caps.
good wheels for a bit of street, or refurb.
Image
£80 all four. ono

Volvo 360 2l stainless steel twin box exhaust.
this is for the b200 engine, with all fittings rubbers, mounts ect.
a good performance upgrade, had it on a 2lt injection and with an airfilter, it had a noticeable performance gain.
asking £150 for this, with said airfilter, if you want it :)
Image

one set of gsxr 600 srad carbs,
38mm bellmouths iirc.
good upgrade for small engines up to 2lt
was planning on using these on a n/a f7r, 1.7 ect.
as they came off the bike, complete with throttle position sensor. so ideal for megajolt. ect.
£75
Image

landrover 90 britpart shocks, for stiffening up the rear,
2"lowering blocks. longer bolts to locate.
£30 (no pics, you all know what they look like)

breaking my saloon up, so will listen to offers on any parts,

other parts to follow.

thanks
Last edited by madseb on 06 Nov 2013 10:52 am, edited 5 times in total.
Image

Ride_on
Posts: 2262
Joined: 26 May 2009 05:34 pm
Location: Belfast, N. Ireland

Re: breaking / stripping volvo 360 glt saloon

Post by Ride_on » 17 Aug 2013 01:30 pm

Do you have and can you sell the black rear window trim?

I might also be interested in the rear bumper brackets if they are not rusted through, but I know these can be a pain to remove.

Would need posted to N.Ireland
1980 345 DL_______1987 360 GLE (project car restored to GLT spec and B230FT'd)
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7

User avatar
madseb
Posts: 345
Joined: 18 Feb 2010 09:58 am

Re: breaking / stripping volvo 360 glt saloon

Post by madseb » 17 Aug 2013 01:48 pm

ill have a gander and get back to you. postage will have to be confirmed.

thanks
Image

tattooer
Posts: 82
Joined: 28 Jul 2012 09:47 pm

Re: breaking / stripping volvo 360 glt saloon

Post by tattooer » 17 Aug 2013 06:13 pm

Price on:
front and rear bumpers
gearbox touque tube and front bellhousing
Them wheels
axle with brakes ect

thanks

Turbosled
Posts: 28
Joined: 15 Aug 2013 12:12 pm

Re: breaking / stripping volvo 360 glt saloon

Post by Turbosled » 17 Aug 2013 08:51 pm

Ill be definatly interested in the wing mirrors, bonnet and rear screen if you could give a price mate

Oh and front grille too ;)

User avatar
madseb
Posts: 345
Joined: 18 Feb 2010 09:58 am

Re: breaking / stripping volvo 360 glt saloon

Post by madseb » 18 Aug 2013 08:12 am

tattooer wrote:Price on:
front and rear bumpers
gearbox touque tube and front bellhousing
Them wheels
axle with brakes ect

thanks
ill be honest wheels owe me a pretty penny, price for these would be around the £600 mark.

front and rear bumpers will be available shortly, unfortunately the drivetrain is needed as the vehicle will still be in use.


cheers

at the moment im only breaking up parts that wont be needed, but retaining the cars driveability, due to its future use.
thanks
Image

bmiles
Posts: 93
Joined: 20 Oct 2011 07:29 pm
Location: Gillingham Kent

Re: breaking / stripping volvo 360 glt saloon

Post by bmiles » 18 Aug 2013 02:15 pm

If its becoming a drifter would u be intrested in swapping ur bonnet for Matt black one

Evoman
Posts: 1688
Joined: 15 Sep 2010 10:47 pm
Location: Mid Wales

Re: breaking / stripping volvo 360 glt saloon

Post by Evoman » 18 Aug 2013 03:49 pm

Shame to see it being broken up and drifted :( Whats too far gone on it? :( I'd also be interested in the electric wing mirrors but looks like im too late
Image

User avatar
madseb
Posts: 345
Joined: 18 Feb 2010 09:58 am

Re: breaking / stripping volvo 360 glt saloon

Post by madseb » 18 Aug 2013 04:15 pm

unfortunately the rust on it is to much for me to handle (not saying its not savable) just to much for me at the moment, ive got other projects to contend with and this ones pulled the short straw.

its still mot'd and taxed. so i might be offering it for sale as a whole car. im undecided at the moment.

thanks
Image

Evoman
Posts: 1688
Joined: 15 Sep 2010 10:47 pm
Location: Mid Wales

Re: breaking / stripping volvo 360 glt saloon

Post by Evoman » 18 Aug 2013 05:11 pm

Do the latter :) Im sure someone would be happy to take it on, GLT saloons aren't common :)
Image

User avatar
Benfraser
Posts: 230
Joined: 01 Feb 2012 06:57 pm
Location: Dartford

Re: breaking / stripping volvo 360 glt saloon

Post by Benfraser » 18 Aug 2013 09:52 pm

Alright mate, I'm after the electric mirrors and the clock out the centre dash?

I'm only in dartford,

Cheers, ben...

User avatar
madseb
Posts: 345
Joined: 18 Feb 2010 09:58 am

Re: breaking / stripping volvo 360 glt saloon

Post by madseb » 18 Aug 2013 10:15 pm

the clock I can sort, but as stated the mirrors and windows will be transferred to another project.

make an offer on the clock.


thanks
Image

User avatar
Benfraser
Posts: 230
Joined: 01 Feb 2012 06:57 pm
Location: Dartford

Re: breaking / stripping volvo 360 glt saloon

Post by Benfraser » 18 Aug 2013 10:35 pm

Alright mate ill be in Essex on Tuesday so could pick up as well, say fiver for the clock. Also a few other little bits I'm interested in. Got a contact number?

Thanks, ben....

07985607419 feel free to message me

tattooer
Posts: 82
Joined: 28 Jul 2012 09:47 pm

Re: garage clearout essex...

Post by tattooer » 21 Aug 2013 02:27 pm

How muhfor the legs

User avatar
madseb
Posts: 345
Joined: 18 Feb 2010 09:58 am

Re: garage clearout essex...

Post by madseb » 21 Aug 2013 06:41 pm

pair of 360 legs will be £120, sounds expensive, but if you break it down, a pair of inserts, lowering springs, hubs, bearings, ect. its really not much at all.

thanks.
Image

Post Reply