lower faster louder parts sale...
lower faster louder parts sale...
hi all,
going to be listing a few bits that im clearing out of my garage:
collection from Dagenham Essex rm10.
edge active 10" bass box with built in amp, 750w, £40
360 legs, with adjustable inserts, and 70?mm lowing springs:
sold
pair of 340/360 converted suabru impresa seats, very comfortable.
on 340/360 runners, as shown in the pictures.
good condition.
£100 collected.
pair of blue race belts
willians 3" webbing, 5point harnesses with crotch strap although can be used without, aircraft quick release style fastner. long reach rear straps, so ideal for saloon/hatch. or similar vehicle.
clip in via eyebolts (not supplied)
had these in the saloon, and were mega kool,
£80 the pair.
set of 4, fox racing alloy wheels.
4x100
15"
7" wide iirc,
unsure of offset, but came off a polo if this helps.
with tyres, although of questionable legality (i.e they will roll, hold air, and have legal tread although probably a bit old)
currently painted black (only a rattle can job, but look presentable. (ignore the overspray in the pic, this has since been removed.
have been on various cars, over the years including the drifter so various marks, no center caps.
good wheels for a bit of street, or refurb.
£80 all four. ono
Volvo 360 2l stainless steel twin box exhaust.
this is for the b200 engine, with all fittings rubbers, mounts ect.
a good performance upgrade, had it on a 2lt injection and with an airfilter, it had a noticeable performance gain.
asking £150 for this, with said airfilter, if you want it
one set of gsxr 600 srad carbs,
38mm bellmouths iirc.
good upgrade for small engines up to 2lt
was planning on using these on a n/a f7r, 1.7 ect.
as they came off the bike, complete with throttle position sensor. so ideal for megajolt. ect.
£75
landrover 90 britpart shocks, for stiffening up the rear,
2"lowering blocks. longer bolts to locate.
£30 (no pics, you all know what they look like)
breaking my saloon up, so will listen to offers on any parts,
other parts to follow.
thanks
going to be listing a few bits that im clearing out of my garage:
collection from Dagenham Essex rm10.
edge active 10" bass box with built in amp, 750w, £40
360 legs, with adjustable inserts, and 70?mm lowing springs:
sold
pair of 340/360 converted suabru impresa seats, very comfortable.
on 340/360 runners, as shown in the pictures.
good condition.
£100 collected.
pair of blue race belts
willians 3" webbing, 5point harnesses with crotch strap although can be used without, aircraft quick release style fastner. long reach rear straps, so ideal for saloon/hatch. or similar vehicle.
clip in via eyebolts (not supplied)
had these in the saloon, and were mega kool,
£80 the pair.
set of 4, fox racing alloy wheels.
4x100
15"
7" wide iirc,
unsure of offset, but came off a polo if this helps.
with tyres, although of questionable legality (i.e they will roll, hold air, and have legal tread although probably a bit old)
currently painted black (only a rattle can job, but look presentable. (ignore the overspray in the pic, this has since been removed.
have been on various cars, over the years including the drifter so various marks, no center caps.
good wheels for a bit of street, or refurb.
£80 all four. ono
Volvo 360 2l stainless steel twin box exhaust.
this is for the b200 engine, with all fittings rubbers, mounts ect.
a good performance upgrade, had it on a 2lt injection and with an airfilter, it had a noticeable performance gain.
asking £150 for this, with said airfilter, if you want it
one set of gsxr 600 srad carbs,
38mm bellmouths iirc.
good upgrade for small engines up to 2lt
was planning on using these on a n/a f7r, 1.7 ect.
as they came off the bike, complete with throttle position sensor. so ideal for megajolt. ect.
£75
landrover 90 britpart shocks, for stiffening up the rear,
2"lowering blocks. longer bolts to locate.
£30 (no pics, you all know what they look like)
breaking my saloon up, so will listen to offers on any parts,
other parts to follow.
thanks
Last edited by madseb on 06 Nov 2013 10:52 am, edited 5 times in total.
Re: breaking / stripping volvo 360 glt saloon
Do you have and can you sell the black rear window trim?
I might also be interested in the rear bumper brackets if they are not rusted through, but I know these can be a pain to remove.
Would need posted to N.Ireland
I might also be interested in the rear bumper brackets if they are not rusted through, but I know these can be a pain to remove.
Would need posted to N.Ireland
1980 345 DL_______1987 360 GLE (project car restored to GLT spec and B230FT'd)
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7
Re: breaking / stripping volvo 360 glt saloon
ill have a gander and get back to you. postage will have to be confirmed.
thanks
thanks
Re: breaking / stripping volvo 360 glt saloon
Price on:
front and rear bumpers
gearbox touque tube and front bellhousing
Them wheels
axle with brakes ect
thanks
front and rear bumpers
gearbox touque tube and front bellhousing
Them wheels
axle with brakes ect
thanks
Re: breaking / stripping volvo 360 glt saloon
Ill be definatly interested in the wing mirrors, bonnet and rear screen if you could give a price mate
Oh and front grille too
Oh and front grille too
Re: breaking / stripping volvo 360 glt saloon
ill be honest wheels owe me a pretty penny, price for these would be around the £600 mark.tattooer wrote:Price on:
front and rear bumpers
gearbox touque tube and front bellhousing
Them wheels
axle with brakes ect
thanks
front and rear bumpers will be available shortly, unfortunately the drivetrain is needed as the vehicle will still be in use.
cheers
at the moment im only breaking up parts that wont be needed, but retaining the cars driveability, due to its future use.
thanks
Re: breaking / stripping volvo 360 glt saloon
If its becoming a drifter would u be intrested in swapping ur bonnet for Matt black one
Re: breaking / stripping volvo 360 glt saloon
Shame to see it being broken up and drifted Whats too far gone on it? I'd also be interested in the electric wing mirrors but looks like im too late
Re: breaking / stripping volvo 360 glt saloon
unfortunately the rust on it is to much for me to handle (not saying its not savable) just to much for me at the moment, ive got other projects to contend with and this ones pulled the short straw.
its still mot'd and taxed. so i might be offering it for sale as a whole car. im undecided at the moment.
thanks
its still mot'd and taxed. so i might be offering it for sale as a whole car. im undecided at the moment.
thanks
Re: breaking / stripping volvo 360 glt saloon
Do the latter Im sure someone would be happy to take it on, GLT saloons aren't common
Re: breaking / stripping volvo 360 glt saloon
Alright mate, I'm after the electric mirrors and the clock out the centre dash?
I'm only in dartford,
Cheers, ben...
I'm only in dartford,
Cheers, ben...
Re: breaking / stripping volvo 360 glt saloon
the clock I can sort, but as stated the mirrors and windows will be transferred to another project.
make an offer on the clock.
thanks
make an offer on the clock.
thanks
Re: breaking / stripping volvo 360 glt saloon
Alright mate ill be in Essex on Tuesday so could pick up as well, say fiver for the clock. Also a few other little bits I'm interested in. Got a contact number?
Thanks, ben....
07985607419 feel free to message me
Thanks, ben....
07985607419 feel free to message me
Re: garage clearout essex...
How muhfor the legs
Re: garage clearout essex...
pair of 360 legs will be £120, sounds expensive, but if you break it down, a pair of inserts, lowering springs, hubs, bearings, ect. its really not much at all.
thanks.
thanks.