Volvo 360 Breaking, Fife, Scotland

Put here your advertisements to sell cars and parts
Post Reply
User avatar
FOAD
Posts: 23
Joined: 04 Mar 2014 08:41 pm

Volvo 360 Breaking, Fife, Scotland

Post by FOAD » 28 Dec 2017 01:02 pm

Mot failure, mainly welding so breaking for spares.

Full stainless steel exhaust system Sold
Gearbox, diff and torquetube Sold
Classic swede coilovers front and rear plus lowering blocks
Volvo 480 alloys with uniroyal rainsport tyres
 

 
Bodywork is above average, it's a bit crusty on the front valance and wheel arches and there's some blisters on the top of the doors.

ImageDSC_0805 by srblythe, on Flickr

ImageDSC_0792 by srblythe, on Flickr

ImageDSC_0793 by srblythe, on Flickr

ImageDSC_0789 by srblythe, on Flickr

ImageDSC_0790 by srblythe, on Flickr


ImageDSC_0791 by srblythe, on Flickr

ImageDSC_0788 by srblythe, on Flickr

ImageDSC_0786 by srblythe, on Flickr

I'll be looking to strip it for bits quite soon and scrap the rest so please get in touch if you want anything.
 
 
Last edited by FOAD on 08 Jan 2018 08:35 pm, edited 2 times in total.

volvomania
Posts: 641
Joined: 09 Aug 2005 02:24 pm
Location: Antwerp, Belgium

Re: Volvo 360 Breaking, Fife, Scotland

Post by volvomania » 28 Dec 2017 03:34 pm

Shame to see another one go but if you are serious bout breaking the car I am after some bits for my 360:

- The supporting beam over the gearbox that sits in between the body and the gearbox (tends to become crusty flaky)
- The gearbox mounting rubbers (don't care about condition)
- The alloy brackets inbetween the gearbox and the gearbox mounting rubbers (tend to corrode on the underside/inside)
- The little connector piece on the propschaft inbetween the gearbox and the propshaft
- The supporting beam on which the rollbar/stabilizer bar is mounted (front of car), mine is seriously corroded at the brackets that fix it to the chassismembers
- The plastic cover underneath the engine if it is still in one piece

That is just a quick thought ....
Life is a journey, so sit back and enjoy the ride!

Born Built Beauties: Parts keeping our cars on the road!

http://www.Born-Built-Beauties.eu

User avatar
FOAD
Posts: 23
Joined: 04 Mar 2014 08:41 pm

Re: Volvo 360 Breaking, Fife, Scotland

Post by FOAD » 28 Dec 2017 10:39 pm

Started stripping it today

ImageDSC_0411 by srblythe, on Flickr

ImageDSC_0416 by srblythe, on Flickr

User avatar
FOAD
Posts: 23
Joined: 04 Mar 2014 08:41 pm

Re: Volvo 360 Breaking, Fife, Scotland

Post by FOAD » 28 Dec 2017 10:42 pm

volvomania wrote:Shame to see another one go but if you are serious bout breaking the car I am after some bits for my 360:

- The supporting beam over the gearbox that sits in between the body and the gearbox (tends to become crusty flaky)
- The gearbox mounting rubbers (don't care about condition)
- The alloy brackets inbetween the gearbox and the gearbox mounting rubbers (tend to corrode on the underside/inside)
- The little connector piece on the propschaft inbetween the gearbox and the propshaft
- The supporting beam on which the rollbar/stabilizer bar is mounted (front of car), mine is seriously corroded at the brackets that fix it to the chassismembers
- The plastic cover underneath the engine if it is still in one piece

That is just a quick thought ....
I'll see how everything is looking as I dismantle it.

User avatar
bogbasic
Posts: 1861
Joined: 21 Nov 2004 10:12 pm
Location: New Malden, Surrey.
Contact:

Re: Volvo 360 Breaking, Fife, Scotland

Post by bogbasic » 29 Dec 2017 03:06 pm

FOAD is back!!
1988 340 1.4 GL, 218k, 5 door (Grey Bess). Gone to CBA.
1991 340 1.7 GL, 64k, 5 door, petrol blue (Deep Blue).
1988 360 2.0 GLE, 140k, 5 door, ocean blue metallic (Blue Bess).
1989 340 1.7 GL, 108k, 3 door (Red Ness).
More info here!

User avatar
FOAD
Posts: 23
Joined: 04 Mar 2014 08:41 pm

Re: Volvo 360 Breaking, Fife, Scotland

Post by FOAD » 29 Dec 2017 08:25 pm

bogbasic wrote:FOAD is back!!
Yes, I'm back to get rid of some bits. I still have my other 360 to sort out.

User avatar
FOAD
Posts: 23
Joined: 04 Mar 2014 08:41 pm

Re: Volvo 360 Breaking, Fife, Scotland

Post by FOAD » 29 Dec 2017 08:27 pm

More pics of stuff.

ImageDSC_0887 by srblythe, on Flickr

ImageDSC_0888 by srblythe, on Flickr

ImageDSC_0889 by srblythe, on Flickr

ImageDSC_0890 by srblythe, on Flickr

ImageDSC_0892 by srblythe, on Flickr

ImageDSC_0893 by srblythe, on Flickr

volvomania
Posts: 641
Joined: 09 Aug 2005 02:24 pm
Location: Antwerp, Belgium

Re: Volvo 360 Breaking, Fife, Scotland

Post by volvomania » 31 Dec 2017 12:27 pm

FOAD wrote:ImageDSC_0888 by srblythe, on Flickr

ImageDSC_0889 by srblythe, on Flickr
What is the condition of the stabi bar support in these pics?
Mine is really crusty and crumbly at the ends where the brackets are that hold it on the chassis.
FOAD wrote: ImageDSC_0893 by srblythe, on Flickr
I see that the gearbox supports, the rubbers and the beam are still on the car.
Don't see the little connector pice on the propshaft.....

Where the clips, that hold the handbrake cables, still on the petrol tank straps? condition?
Life is a journey, so sit back and enjoy the ride!

Born Built Beauties: Parts keeping our cars on the road!

http://www.Born-Built-Beauties.eu

340terry89
Posts: 14
Joined: 14 Nov 2017 06:30 pm

Re: Volvo 360 Breaking, Fife, Scotland

Post by 340terry89 » 04 Jan 2018 11:14 pm

Hi, how much are you after for the coil overs? What condition are the front wings in?

Cheers

ItsJustJak
Posts: 3
Joined: 21 Dec 2017 01:25 am

Re: Volvo 360 Breaking, Fife, Scotland

Post by ItsJustJak » 08 Jan 2018 12:26 am

Hiya, I’m after all the running gear if it’s in good condition. I’m looking to convert my 340 to eradicate the cheese propshaft.

User avatar
FOAD
Posts: 23
Joined: 04 Mar 2014 08:41 pm

Re: Volvo 360 Breaking, Fife, Scotland

Post by FOAD » 08 Jan 2018 08:31 pm

340terry89 wrote:Hi, how much are you after for the coil overs? What condition are the front wings in?

Cheers
£200 for the front and £100 for the rear.

User avatar
FOAD
Posts: 23
Joined: 04 Mar 2014 08:41 pm

Re: Volvo 360 Breaking, Fife, Scotland

Post by FOAD » 08 Jan 2018 08:32 pm

ItsJustJak wrote:Hiya, I’m after all the running gear if it’s in good condition. I’m looking to convert my 340 to eradicate the cheese propshaft.
Running gear sold sorry.

volvomania
Posts: 641
Joined: 09 Aug 2005 02:24 pm
Location: Antwerp, Belgium

Re: Volvo 360 Breaking, Fife, Scotland

Post by volvomania » 21 Jan 2018 10:09 pm

Any further updates?
Life is a journey, so sit back and enjoy the ride!

Born Built Beauties: Parts keeping our cars on the road!

http://www.Born-Built-Beauties.eu

105charlie
Posts: 4
Joined: 22 Jan 2018 12:16 pm

Re: Volvo 360 Breaking, Fife, Scotland

Post by 105charlie » 22 Jan 2018 02:35 pm

After the clutch fork and bearing if they're available. Also after 360 rad and hoses and the throttle cable if you've got it.

Post Reply