The stop-gap: 1980 (mk1) 345 DL
-
- *** V3M DONOR ***
- Posts: 9361
- Joined: 29 Jan 2004 04:20 am
- Location: Nottingham, UK
Re: The stop-gap: 1980 (mk1) 345 DL
The spoiler makes it, doesn't it? Shall I start looking into people who can do FG work? DBS might be game...for showing me how to do it safely (I've done FG work before, but never taken a mould).
I want recoup (at least most of) what I'll have put into it (not including things I'll be taking off, like the spoiler and wheels), and for the car to go to an excellent home. So yes, get saving And if you're planning to take it near a motorway at all regularly, get scouting out a B14 5 speed box. The early 4 speed with the short diff gets tedious above 60mph...and fuel economy takes a 10-15mpg hit, too.
cheers
James
I want recoup (at least most of) what I'll have put into it (not including things I'll be taking off, like the spoiler and wheels), and for the car to go to an excellent home. So yes, get saving And if you're planning to take it near a motorway at all regularly, get scouting out a B14 5 speed box. The early 4 speed with the short diff gets tedious above 60mph...and fuel economy takes a 10-15mpg hit, too.
cheers
James
VOC 300-series Register Keeper
'89 740 Turbo Intercooler
'88 360 Turbo Intercooler
'85 360 GLT
'81 343 GLS R-Sport
'79 343 DL
'70 164
...and some modern FWD nonsense to get me to work...
'89 740 Turbo Intercooler
'88 360 Turbo Intercooler
'85 360 GLT
'81 343 GLS R-Sport
'79 343 DL
'70 164
...and some modern FWD nonsense to get me to work...
Re: The stop-gap: 1980 (mk1) 345 DL
Blu-Tac, loads of it, safe, easy to make mould. Also it was preferred method of fixing light bulb holders of rear light clusters of previous owner of my 360, well there was more in fuse box and stereo wiring too
-
- *** V3M DONOR ***
- Posts: 4398
- Joined: 06 Jan 2007 02:38 pm
- Location: Bonn, Germany
Re: The stop-gap: 1980 (mk1) 345 DL
Totally agree on the front spoiler, it transforms the look of a Mk1. Now all you need to do is lose the alloys I use the "Hercules" wheels myself with winter tyres, but on a Mk1 they do look a bit out of place.
Look forward to seeing the car in the flesh tomorrow
Tom
Look forward to seeing the car in the flesh tomorrow
Tom
343 GL Touring B14.1E CVT (155) 98000kms 1980 (sold)
343 L Junior B14.3E MT4 (155) 229000kms 1981 (scrapped)
343 DLS B19A MT4 (155) 167900kms 1982
360 GL Injection B200F MT5 (231) 348598kms 1988 (scrapped)
360 GLT B200F MT5 (302) 230000kms 1988
343 L Junior B14.3E MT4 (155) 229000kms 1981 (scrapped)
343 DLS B19A MT4 (155) 167900kms 1982
360 GL Injection B200F MT5 (231) 348598kms 1988 (scrapped)
360 GLT B200F MT5 (302) 230000kms 1988
Re: The stop-gap: 1980 (mk1) 345 DL
It must be good - Chris is considering something other than a Mk3
1989 - Volvo 360 GLT
1985 - Volvo 360 GLS
2008 - Volvo S60 SE Lux
1985 - Volvo 360 GLS
2008 - Volvo S60 SE Lux
-
- *** V3M DONOR ***
- Posts: 1204
- Joined: 27 Jul 2004 11:36 pm
- Location: Belper, Derbyshire UK
- Contact:
Re: The stop-gap: 1980 (mk1) 345 DL
4 steel wheels with nearly new tyres (courtesy of Herr Thhhhpaaayynetah) were fitted at Grizfest 2010 and has cured a lot of the handling/ride waywardness and vibration.
The car has just spent a week relaxing at my house as Foggy has too many cars to store at his house/his unit so it'll live here for the time being.
It has had a few things done to it, namely;
Fixing the broken window winder
Re-fixing the N/S/R window seal (it had dropped in the channel causing massive amounts of wind noise)
Replacing the passenger seatbelt clip after it exploded at Grizfest
Fitting a cigarette lighter as the old one was missing
Fixing the heater control/ashtray illumination
Gluing the door handle trims back together
New wiper blade on the drivers side, drivers one moved to passenger side, pass one binned
4 new spark plugs
Points and condensor were newish looking so were just cleaned and gapped properly
New HT leads
New LT wire to dizzy
Static timing set. Had to be retarded due to pinking on 95RON
Idle speed and mixture set on carb.
Exhaust blow sealed with Gun Gum (temporary bodge until Foggy gets his welder out)
She's now running much better than before and is basically 'nearly there'. A new parcel shelf wouldn't go amiss, nor would a pass side indicator repeater (guess who forgot to get one out of his stash of parts....!) but that's about it. To make her really nice needs a pair of new front seats, the air filter box stripping and painting and in all fairness a carb rebuild to iron out any remaining fueling issues. A 5spd box would be handy too!! As Foggy says the bodywork needs T-Cut and a polish - possibly compounding too to make it really nice, but she does have a certain patina that comes with being mostly original and old and the odd dents give her character.
The car has just spent a week relaxing at my house as Foggy has too many cars to store at his house/his unit so it'll live here for the time being.
It has had a few things done to it, namely;
Fixing the broken window winder
Re-fixing the N/S/R window seal (it had dropped in the channel causing massive amounts of wind noise)
Replacing the passenger seatbelt clip after it exploded at Grizfest
Fitting a cigarette lighter as the old one was missing
Fixing the heater control/ashtray illumination
Gluing the door handle trims back together
New wiper blade on the drivers side, drivers one moved to passenger side, pass one binned
4 new spark plugs
Points and condensor were newish looking so were just cleaned and gapped properly
New HT leads
New LT wire to dizzy
Static timing set. Had to be retarded due to pinking on 95RON
Idle speed and mixture set on carb.
Exhaust blow sealed with Gun Gum (temporary bodge until Foggy gets his welder out)
She's now running much better than before and is basically 'nearly there'. A new parcel shelf wouldn't go amiss, nor would a pass side indicator repeater (guess who forgot to get one out of his stash of parts....!) but that's about it. To make her really nice needs a pair of new front seats, the air filter box stripping and painting and in all fairness a carb rebuild to iron out any remaining fueling issues. A 5spd box would be handy too!! As Foggy says the bodywork needs T-Cut and a polish - possibly compounding too to make it really nice, but she does have a certain patina that comes with being mostly original and old and the odd dents give her character.
Terms and conditions apply. This post may go down as well as up. Regulated by the Financial Services Authority. Hard hats to be worn. No reversing without a banksman. No admittance to unauthorized persons. Stop that. Put that down. Leave that alone.
Re: The stop-gap: 1980 (mk1) 345 DL
I meant to ask whether they improved things - sounds like they did, it certainly looked better on the 175 wide tyres!V6 Man wrote:4 steel wheels with nearly new tyres (courtesy of Herr Thhhhpaaayynetah) were fitted at Grizfest 2010 and has cured a lot of the handling/ride waywardness and vibration.
1989 - Volvo 360 GLT
1985 - Volvo 360 GLS
2008 - Volvo S60 SE Lux
1985 - Volvo 360 GLS
2008 - Volvo S60 SE Lux
Re: The stop-gap: 1980 (mk1) 345 DL
It may end up being the biggest "purchase may never actually happen" in the world, but I've been doing a fair amount of looking into insurance for this car lately
I've almost convinced myself it'd make a sensible "backup for when I've broken Fake and classic to put in fields on Sundays" mobile. However, we all know it really isn't
Damn you James, I managed to not buy it the first time.
I've almost convinced myself it'd make a sensible "backup for when I've broken Fake and classic to put in fields on Sundays" mobile. However, we all know it really isn't
Damn you James, I managed to not buy it the first time.
'89(G) 340 GLE B172k
'03 S60 D5 SE, '91 (J) MX5, 1954 Cyclemaster
Ex:
'89(F) 340 GL F7R (ex B172k) - Fake -> SBKV 300 Runner Up 08, 12; '91(H) 340 GL B14.4E - Kar; '88(F) 360 GLT B200E - Jet -> BKV 300 Runner Up 09; '89(G) 360 GLT B200E - Beast
'03 S60 D5 SE, '91 (J) MX5, 1954 Cyclemaster
Ex:
'89(F) 340 GL F7R (ex B172k) - Fake -> SBKV 300 Runner Up 08, 12; '91(H) 340 GL B14.4E - Kar; '88(F) 360 GLT B200E - Jet -> BKV 300 Runner Up 09; '89(G) 360 GLT B200E - Beast
-
- *** V3M DONOR ***
- Posts: 9143
- Joined: 11 Nov 2008 04:22 pm
- Location: Newcastle Upon Toon
Re: The stop-gap: 1980 (mk1) 345 DL
I'll have it.
Ive killed mine.
(thers an embarrasing story, which will not be divulged)
But I'll have it if theres no southern takers.
You take installments a la Littlewoods Catalouge dont you Foggy?
Ive killed mine.
(thers an embarrasing story, which will not be divulged)
But I'll have it if theres no southern takers.
You take installments a la Littlewoods Catalouge dont you Foggy?
Re: The stop-gap: 1980 (mk1) 345 DL
Where is it located?????
Keeper of The Knights' of Bushido-lest we forget
Write it in your heart.
Stand by the code and it will stand by you.
Ask no more and give no less than honesty,courage,loyalty,generosity and fairness.
The code of the West.
Write it in your heart.
Stand by the code and it will stand by you.
Ask no more and give no less than honesty,courage,loyalty,generosity and fairness.
The code of the West.
-
- *** V3M DONOR ***
- Posts: 9143
- Joined: 11 Nov 2008 04:22 pm
- Location: Newcastle Upon Toon
Re: The stop-gap: 1980 (mk1) 345 DL
Chill.
I'm off to Newbury tomorrow afternoon so could take you if it's on route.
I'm off to Newbury tomorrow afternoon so could take you if it's on route.
Keeper of The Knights' of Bushido-lest we forget
Write it in your heart.
Stand by the code and it will stand by you.
Ask no more and give no less than honesty,courage,loyalty,generosity and fairness.
The code of the West.
Write it in your heart.
Stand by the code and it will stand by you.
Ask no more and give no less than honesty,courage,loyalty,generosity and fairness.
The code of the West.
-
- *** V3M DONOR ***
- Posts: 9143
- Joined: 11 Nov 2008 04:22 pm
- Location: Newcastle Upon Toon
Re: The stop-gap: 1980 (mk1) 345 DL
fogglemiester is not selling for a while yet.sven360 wrote:Chill.
I'm off to Newbury tomorrow afternoon so could take you if it's on route.
cheers for the offer though dude.
Re: The stop-gap: 1980 (mk1) 345 DL
No!Chris_C wrote:sensible
1989 - Volvo 360 GLT
1985 - Volvo 360 GLS
2008 - Volvo S60 SE Lux
1985 - Volvo 360 GLS
2008 - Volvo S60 SE Lux
-
- *** V3M DONOR ***
- Posts: 9143
- Joined: 11 Nov 2008 04:22 pm
- Location: Newcastle Upon Toon
Re: The stop-gap: 1980 (mk1) 345 DL
Yeah, sorry. That was me drunk-posting.SteveP wrote:No!Chris_C wrote:sensible
Doesn't seem like such a good idea on a Sunday morning.
-
- *** V3M DONOR ***
- Posts: 1204
- Joined: 27 Jul 2004 11:36 pm
- Location: Belper, Derbyshire UK
- Contact:
Re: The stop-gap: 1980 (mk1) 345 DL
Updates!
Both good news and bad news I'm afraid!
Good news;
Foggy collected it from me yesterday and set off for a social call to friends before it went to the VOC Northern BKV in Wetherby today. He reports that it was running beautifully and was a much nicer car than the one he dropped off at mine a week previously. The BKV had a new judging system was in place whereby there were no judges and no defined set of rules, but everyone had to vote for their own winner and runner up in each class. Miracle of miracles it came 1st in the 300 class and actually got more than one vote for overall runner up!!
Bad news;
On the way back to mine it started to run a little rough and on getting back it was found that it was blowing by the 'new' thread insert. That makes it two that it's eaten now as this one has partially disintegrated too. Suspicion is that the insert kit is of a poor quality so Foggy plans to try a more expensive kit (like the one he used successfully on the 240) and give it one more go before calling it a day and swapping cyl heads.
Both good news and bad news I'm afraid!
Good news;
Foggy collected it from me yesterday and set off for a social call to friends before it went to the VOC Northern BKV in Wetherby today. He reports that it was running beautifully and was a much nicer car than the one he dropped off at mine a week previously. The BKV had a new judging system was in place whereby there were no judges and no defined set of rules, but everyone had to vote for their own winner and runner up in each class. Miracle of miracles it came 1st in the 300 class and actually got more than one vote for overall runner up!!
Bad news;
On the way back to mine it started to run a little rough and on getting back it was found that it was blowing by the 'new' thread insert. That makes it two that it's eaten now as this one has partially disintegrated too. Suspicion is that the insert kit is of a poor quality so Foggy plans to try a more expensive kit (like the one he used successfully on the 240) and give it one more go before calling it a day and swapping cyl heads.
Terms and conditions apply. This post may go down as well as up. Regulated by the Financial Services Authority. Hard hats to be worn. No reversing without a banksman. No admittance to unauthorized persons. Stop that. Put that down. Leave that alone.