B19A Not idling correctly when warm

A global place for general discussion (Volvo, V3M or non-Volvo related topics).
Please introduce yourself here, your Volvo 300 hobby...
NO technical support, parts requests or car advertisements here
Post Reply
User avatar
SteveP
*** V3M DONOR ***
Posts: 7943
Joined: 21 Sep 2004 12:45 pm
Location: Coventry, UK

B19A Not idling correctly when warm

Post by SteveP » 11 Aug 2010 11:41 am

My 360 GLS has had an issue idling of late... a couple of weeks ago it was idling at about 500-600rpm, but last night it has got progressively worse, initially it was idling at about 300rpm and now longer wants to idle at all and stalls. Which made pulling up to roundabouts/traffic lights interesting last night :lol: I also think it seems to be feeling very flat at WOT compared to what it used to, but this only happened on the latter part of the journey so I'd need to drive it again to find out for sure.

I haven't investigated anything so far, it was dark and late when I put it in the garage last night - so just looking for some pointers where to start really, it has the Stromberg CD175 carb which I'm hoping to get a spare from Liam to refurb anyway, so if that's whats needed I'll do that!
1989 - Volvo 360 GLT
1985 - Volvo 360 GLS
2008 - Volvo S60 SE Lux

MCHUDD
*** V3M DONOR ***
Posts: 2537
Joined: 18 May 2006 03:43 pm
Location: BELFAST UNITED KINGDOM

Re: B19A Not idling correctly when warm

Post by MCHUDD » 11 Aug 2010 04:18 pm

Hi steve.
I have the same problem at the moment.
I am just too busy with work and all to get it sorted.
Be great if somone came up with a few pointers.
Cheers Mark. sm4

User avatar
Chris_C
*** V3M DONOR ***
Posts: 9600
Joined: 18 Jun 2004 11:53 pm
Location: South Coast, UK

Re: B19A Not idling correctly when warm

Post by Chris_C » 11 Aug 2010 05:57 pm

Doubt it is because it needs a rebuild per say bud, sounds like the same as VND's problem and you have an air leak with her then going lean.

Have a feel on the throttle spindle, the bearings in there are a service part (you'll do the new ones in the rebuild) and are one cause of airleaks but that'd come over 50,000miles rather than in a week. I reckon perished hose or something.
'89(G) 340 GLE B172k
'03 S60 D5 SE, '91 (J) MX5, 1954 Cyclemaster
Ex:
'89(F) 340 GL F7R (ex B172k) - Fake -> SBKV 300 Runner Up 08, 12; '91(H) 340 GL B14.4E - Kar; '88(F) 360 GLT B200E - Jet -> BKV 300 Runner Up 09; '89(G) 360 GLT B200E - Beast

User avatar
V6 Man
*** V3M DONOR ***
Posts: 1204
Joined: 27 Jul 2004 11:36 pm
Location: Belper, Derbyshire UK
Contact:

Re: B19A Not idling correctly when warm

Post by V6 Man » 11 Aug 2010 06:05 pm

Probably a clogged air bypass passage due to crank breather fumes.
Terms and conditions apply. This post may go down as well as up. Regulated by the Financial Services Authority. Hard hats to be worn. No reversing without a banksman. No admittance to unauthorized persons. Stop that. Put that down. Leave that alone.

User avatar
2 Fast 4 U
Posts: 120
Joined: 28 Nov 2007 10:06 pm
Location: Netherlands

Re: B19A Not idling correctly when warm

Post by 2 Fast 4 U » 11 Aug 2010 06:26 pm

See if the bolts on the inlet and exhaust manifold are tightened correctly
Image

Understeer: The front of the car hits the wall,
Oversteer: The rear of the car hits the wall,
Horsepower: How fast the car hits the wall,
Torque: How far the car pushes the wall.

Post Reply