Page 1 of 2
Bit of tlc with 'unorthodox' cutting paste
Posted: 18 Feb 2011 06:25 pm
by CBA
Had no Tcut so... eucryl!! don't laugh it
bloody worked! (was at my parents and was all I could find)
then coat of carnauba wax. (surfboard wax)
interior valet (dismantled/cleaned/remantled)
adjusted stiff door handle, etc.
pics:
Re: Bit of tlc with 'unorthodox' cutting paste
Posted: 18 Feb 2011 06:26 pm
by CBA
REALISE: this camera sucks.
Re: Bit of tlc with 'unorthodox' cutting paste
Posted: 18 Feb 2011 06:27 pm
by volvosneverdie
good going man. Nutella is meant to be good too. Expensive, but delicious.
Camera does suck. Any good at etchings?
Re: Bit of tlc with 'unorthodox' cutting paste
Posted: 18 Feb 2011 06:32 pm
by theo2468
i knew peanut butters good on bumpers because of the oil in it but i never knew nutella was!!
might try jam tomorrow haa
Re: Bit of tlc with 'unorthodox' cutting paste
Posted: 18 Feb 2011 06:36 pm
by CBA
Im really happy with it. tranny service is overdue and gonna be expensive but good to know magnatec can go in the engine and box, finding atf suffix a type a is not easy.
Re: Bit of tlc with 'unorthodox' cutting paste
Posted: 18 Feb 2011 06:37 pm
by Speedy88
Good stuff man

Re: Bit of tlc with 'unorthodox' cutting paste
Posted: 18 Feb 2011 07:24 pm
by CBA
peanut butter would get the car very clean, I have 3 dogs...
Re: Bit of tlc with 'unorthodox' cutting paste
Posted: 18 Feb 2011 07:55 pm
by CBA
I'll take some proper pics if I can only find a usb lead to fit my proper camera.. either that or its getting a "normal" USB-B connector soldered on

Re: Bit of tlc with 'unorthodox' cutting paste
Posted: 18 Feb 2011 07:59 pm
by volvosneverdie
CBA wrote:I'll take some proper pics if I can only find a usb lead to fit my proper camera.. either that or its getting a "normal" USB-B connector soldered on

Looks like a sweet ride man. Be cool to see some detailed pics.

Re: Bit of tlc with 'unorthodox' cutting paste
Posted: 18 Feb 2011 10:06 pm
by Evoman
it'd be a yummy ride if you used peanut butter
Looks nice, i like saloons and that colour!
Re: Bit of tlc with 'unorthodox' cutting paste
Posted: 18 Feb 2011 10:43 pm
by CBA
It's getting the worx!, I have zero cash and almost zero tools but I'm getting there.
Re: Bit of tlc with 'unorthodox' cutting paste
Posted: 18 Feb 2011 10:43 pm
by CBA
I don't have a kerb to prop it up on here, even the road is falling apart FFS
Re: Bit of tlc with 'unorthodox' cutting paste
Posted: 18 Feb 2011 10:45 pm
by CBA
*Has Fallen Apart

Re: Bit of tlc with 'unorthodox' cutting paste
Posted: 19 Feb 2011 04:25 pm
by magnumpi
CBA wrote: tranny service is overdue and gonna be expensive but good to know man can go in the box.
Each to their own and all that
Whats ecryl anyway? Whwn i've bothered i just use linseed oil which works pretty well and if you apply enough wil last a good 6months before the grey returns.
Re: Bit of tlc with 'unorthodox' cutting paste
Posted: 20 Feb 2011 01:12 pm
by CBA
*Magnatec 15w40 can go in the box and engine says volvo.. my phone has a funky spell checker.
and Eucryl is tooth whitening powder.. my parents go through a lot of it.