Page 1 of 1
Hi new to the game 360glt (australia) Help
Posted: 18 Mar 2011 05:14 am
by Aussie Lord
hi there i have liked volvo for a long time but as they are not a very common car over here and are pricey i have not had alot to do with them but one day seeing a 360glt i said must have one and now have two (always better then one) any here are some pics they are off my phone and cars have been in the shed a good few months. i have one maroon (1984) and blue (1985) and am wondering which engine to go with the turbo or twin cam 16v from the 7/900 series i am figuring that the work would be close to the same with both needing wiring and exhaust mods etc i no dramas playing with turbos as i have been making my own set ups for years or should i just turbo the standard motor as over here the run low compression due to our fuel but the injection system does not look easy to up grade for turbo cheers all
Re: Hi new to the game 360glt (australia) Help
Posted: 18 Mar 2011 10:03 am
by theo2468
welcome mate.
Dont see any pics?
Re: Hi new to the game 360glt (australia) Help
Posted: 18 Mar 2011 10:08 am
by whiskeyonesix
Welcome!
Always good to see another Aussie 360 around! Where are you from? I've got one of the few remaining in Perth.
A 16V conversion would be interesting

Re: Hi new to the game 360glt (australia) Help
Posted: 18 Mar 2011 10:45 am
by volvosneverdie
Welcome in dude.

Re: Hi new to the game 360glt (australia) Help
Posted: 18 Mar 2011 01:23 pm
by Aussie Lord
sorry tried to upload pics but where to big so here is a link and i am located far north coast NSW
http://s927.photobucket.com/home/Lord_Fidias/index
Re: Hi new to the game 360glt (australia) Help
Posted: 18 Mar 2011 01:35 pm
by whiskeyonesix
Coupla MkII's by the look of it. What's with the extra gauges? Was one of them a project car or something?
I suppose your plan is to build a good car out of the two..... given the price of parts over here, I reckon that's a good idea

Re: Hi new to the game 360glt (australia) Help
Posted: 18 Mar 2011 05:16 pm
by Ride_on
Being an Engineer I prefer to go for the minimum Engineering approach / least fabrication, so I am putting in a standard 2.3 940 Turbo engine with overboost mods, might flow the turbo exhaust side a bit, seems to be a restriction using 11psi, 360 drive can't take much more than this anyway. The later 940s are the best AFAIK with stronger con rods, piston oil squirter's etc. There are some good threads on this, and there are a number of things to take care of, but mainly you just have exhaust fab to do and mix and match some other Volvo parts.
Re: Hi new to the game 360glt (australia) Help
Posted: 18 Mar 2011 08:36 pm
by volvosneverdie
Re: Hi new to the game 360glt (australia) Help
Posted: 19 Mar 2011 04:06 am
by Aussie Lord
first off thanks to volvosneverdie for posting the pics and as for the gauges they where in the car when i brought it as for making one out of two will try not to as i have plenty of other car to use as a daily until one is ready then start the second one. so look like i am going down the turbo route thanks to all
Re: Hi new to the game 360glt (australia) Help
Posted: 19 Mar 2011 11:53 am
by volvosneverdie
Good choice sir.
