Page 1 of 2
VDO Oil gauge bulb/holder
Posted: 24 Feb 2012 12:53 am
by Attack2001
Hi all, looking into fitting my extra gauges now, and i've just realised only one of them has a backlight. Looks like i need to buy some bulbs and holders. Has anyone got an idea of where i could get them? i've looked all over the web but cant seem to find them, only newer style one that dont look like they're going to fit. Its this bit i need if you dont get what im on about, i get confused by myself a lot of the time

haha
I need 2, including the bulbs. Any ideas? Thanks, Thomas.........................
Re: VDO Oil gauge bulb/holder
Posted: 24 Feb 2012 09:09 am
by Chris_C
I have some of the style before that (brass, bayonet fitting) but those I thought were the newer ones.
I got mine from US ebay from memory, wasn't much even with the postage, think I had to get 5. Worth a look there then give VDO themselves a ring bud.
Re: VDO Oil gauge bulb/holder
Posted: 24 Feb 2012 02:15 pm
by Attack2001
There is two currently on american ebay, but they want nearly £15 each and there second hand, i'd like some new ones so i know they work
EDIT - Just had another look, there brand new and hes got loads, so looks like i've just answered my own question

Re: VDO Oil gauge bulb/holder
Posted: 24 Feb 2012 04:46 pm
by MCHUDD
Re: VDO Oil gauge bulb/holder
Posted: 24 Feb 2012 06:33 pm
by Attack2001
Okie dokie, i await your reply

Thomas..............

Re: VDO Oil gauge bulb/holder
Posted: 24 Feb 2012 06:45 pm
by MCHUDD
Hi Thomas.
I will have a look tomorow morning and let you know.
Cheers Mark.

Re: VDO Oil gauge bulb/holder
Posted: 25 Feb 2012 12:11 pm
by MCHUDD
Hi Thomas.
Bulb and holder is on its way to you.
Its not the propor one but it does fit.
Let me know when it arrives.
Cheers Mark.

Re: VDO Oil gauge bulb/holder
Posted: 25 Feb 2012 02:11 pm
by Attack2001
Re: VDO Oil gauge bulb/holder
Posted: 26 Feb 2012 11:46 am
by trabitom99
The bulbs should be available new from Bosch. I don't know the actual type number unfortunately ...
Cheers
Tom
Re: VDO Oil gauge bulb/holder
Posted: 26 Feb 2012 02:29 pm
by macplaxton
The bulbs look like 1.2W capless things. I've got the number on a box in the glovebox.
Re: VDO Oil gauge bulb/holder
Posted: 26 Feb 2012 11:49 pm
by Attack2001
macplaxton wrote:The bulbs look like 1.2W capless things. I've got the number on a box in the glovebox.
It'd be nice to know so i can get some new bulbs incase these are blown

Not the same as the ones behind the heater fan and headlight switch by any chance? as i need some of them too

Thomas.................
Re: VDO Oil gauge bulb/holder
Posted: 27 Feb 2012 03:11 am
by macplaxton
They are the same (98% certain).
I've just jumped into a nice warm bed, so by about lunchtime, if I remember, I'll go the opposite side of this wall and dive into the glovebox and get a number

Re: VDO Oil gauge bulb/holder
Posted: 27 Feb 2012 12:46 pm
by volvomania
The bulbs are still available from Volvo.
Re: VDO Oil gauge bulb/holder
Posted: 06 Mar 2012 09:55 pm
by Attack2001
Just thought i'd put up a little update. After i got MCHUDD's spare holder (Thanks once again!

) I still needed one more, after much looking around i found one that looked pretty much the same. £13 later and i got this, perfect fit, exactly the same
***Any ideas where i can some more of these nuts that are used to hold the gauge in? you can see one right at the top***
I got it from here, its the very top one
http://www.furneauxriddall.com/acatalog ... Bulbs.html
Just useful to know incase anyone needs to get some

Thomas....................
P.S Got all my gauges together now, what du think?

Re: VDO Oil gauge bulb/holder
Posted: 06 Mar 2012 09:58 pm
by Speedy88
Nice
