2.3 Turbo drift 360
-
- Posts: 1015
- Joined: 05 Jun 2011 03:45 pm
- Location: Rochester, Kent
- Contact:
Re: 2.3 Turbo drift 360
Landrover 90/110 front shockabsorbers - eBay item: 230854374317
Front springs can be acquired from Dai (classicswede) on this forum - http://www.volvo300mania.com/forum-uk/v ... f=8&t=1804
To replace the oil on the front shocks youl need the older style front shocks without inserts. Undo the big nut on the top, drain the oil into a measuring cup, replace oil with exactly the same amount of gearbox oil.
Can't help with anything else, although I understand doing a 360 clutch is a b*tch of a job.
Thomas.............
Front springs can be acquired from Dai (classicswede) on this forum - http://www.volvo300mania.com/forum-uk/v ... f=8&t=1804
To replace the oil on the front shocks youl need the older style front shocks without inserts. Undo the big nut on the top, drain the oil into a measuring cup, replace oil with exactly the same amount of gearbox oil.
Can't help with anything else, although I understand doing a 360 clutch is a b*tch of a job.
Thomas.............
Re: 2.3 Turbo drift 360
Attack2001 wrote:Landrover 90/110 front shockabsorbers - eBay item: 230854374317
Front springs can be acquired from Dai (classicswede) on this forum - http://www.volvo300mania.com/forum-uk/v ... f=8&t=1804
To replace the oil on the front shocks youl need the older style front shocks without inserts. Undo the big nut on the top, drain the oil into a measuring cup, replace oil with exactly the same amount of gearbox oil.
Can't help with anything else, although I understand doing a 360 clutch is a b*tch of a job.
Thomas.............
Ahh, yes, it was Classicswede not drift moto who were doing the lowering stuff!
Can the shock mod be done with the units in situ?
Not so good if the 360 clutch is a bugger! Would have expected it to be easy with the box being out the way too!
-
- Posts: 1015
- Joined: 05 Jun 2011 03:45 pm
- Location: Rochester, Kent
- Contact:
Re: 2.3 Turbo drift 360
Unfortunately I think you need to take the strut off, however it's only the 3 on the top mount, one on the track rod and one on the bottom ball jointAde wrote:Attack2001 wrote:Landrover 90/110 front shockabsorbers - eBay item: 230854374317
Front springs can be acquired from Dai (classicswede) on this forum - http://www.volvo300mania.com/forum-uk/v ... f=8&t=1804
To replace the oil on the front shocks youl need the older style front shocks without inserts. Undo the big nut on the top, drain the oil into a measuring cup, replace oil with exactly the same amount of gearbox oil.
Can't help with anything else, although I understand doing a 360 clutch is a b*tch of a job.
Thomas.............
Ahh, yes, it was Classicswede not drift moto who were doing the lowering stuff!
Can the shock mod be done with the units in situ?
Not so good if the 360 clutch is a bugger! Would have expected it to be easy with the box being out the way too!
The problem with the 360 stuff is it's all bolted together solidly, so you either need to shuffle the engine forward or shuffle the whole of the transmission, inc torque tube and gearbox backwards. I believe everyone moves the engine
Hope this helps, Thomas.........
Re: 2.3 Turbo drift 360
like this, really want me a 2.3 T
'88 360 +T LSD - sold
'87 760 TDI (D24TIC) - sold
'04 V40 D sport (F9Q, decat, Remapped, launch control)
'89 740 SE (b230ft, 12psi, V-cam, headwork, 'remapped', banded steels)
'86 340 DL 1.4
'87 760 TDI (D24TIC) - sold
'04 V40 D sport (F9Q, decat, Remapped, launch control)
'89 740 SE (b230ft, 12psi, V-cam, headwork, 'remapped', banded steels)
'86 340 DL 1.4
Re: 2.3 Turbo drift 360
Got some good news.... the 360 turbo drift project is going to be featuring in Retro Cars magazine!
I already contribute to this mag with photography now and again, so this will be a great opportunity to get the car out there and noticed!
It'll probably be a similar idea to the story features that I've done for the Ford mags before with my drift Sierras. For example 6 pages of tyre smoking fun like these ones..
And if that's too much Ford action for you, here's the 360 being collected the night before we used it at Crail there....
I've also just put up a wanted ad' for a few small bits...
http://www.volvo300mania.com/forum-uk/v ... 80#p169480
I already contribute to this mag with photography now and again, so this will be a great opportunity to get the car out there and noticed!
It'll probably be a similar idea to the story features that I've done for the Ford mags before with my drift Sierras. For example 6 pages of tyre smoking fun like these ones..
And if that's too much Ford action for you, here's the 360 being collected the night before we used it at Crail there....
I've also just put up a wanted ad' for a few small bits...
http://www.volvo300mania.com/forum-uk/v ... 80#p169480
Re: 2.3 Turbo drift 360
Awsome! be the second 360 in retro cars. Mine was in there last year sometime
Your Adam Brannan?! Awsome I have "liked" your fb page for ages, always loved your photos! You might have heard of my mate harry charnock, hes done some work for retro cars
Your Adam Brannan?! Awsome I have "liked" your fb page for ages, always loved your photos! You might have heard of my mate harry charnock, hes done some work for retro cars
Re: 2.3 Turbo drift 360
Meant to say i had some chopped sierra springs on mine for a while, much stiffer obvs and handled quite well
Re: 2.3 Turbo drift 360
Evoman wrote:Awsome! be the second 360 in retro cars. Mine was in there last year sometime
Your Adam Brannan?! Awsome I have "liked" your fb page for ages, always loved your photos! You might have heard of my mate harry charnock, hes done some work for retro cars
Cheers!
And it's "Adrian Brannan" actually
Re: 2.3 Turbo drift 360
you say adrian...I might have had too much to drink
Re: 2.3 Turbo drift 360
Love the photos mate! 360 clutch is a bit of a pain, Whole car needs to be up on stands then bellhousing, torque tube and gearbox/diff need to be dropped (apparently you can keep the box mounted but have to unmount the fronts of the leafs on the back?) I was swapping the lot when I did mine to fit an LSD. Reckon it takes a day to do the clutch - maybe less if your not working outdoors in the mud lol
'88 360 +T LSD - sold
'87 760 TDI (D24TIC) - sold
'04 V40 D sport (F9Q, decat, Remapped, launch control)
'89 740 SE (b230ft, 12psi, V-cam, headwork, 'remapped', banded steels)
'86 340 DL 1.4
'87 760 TDI (D24TIC) - sold
'04 V40 D sport (F9Q, decat, Remapped, launch control)
'89 740 SE (b230ft, 12psi, V-cam, headwork, 'remapped', banded steels)
'86 340 DL 1.4
Re: 2.3 Turbo drift 360
Hi mate .
Let us all know when the car is featured so as i can go out and but the mag.
Cheers Mark.
Let us all know when the car is featured so as i can go out and but the mag.
Cheers Mark.
Re: 2.3 Turbo drift 360
All change, the 360 stays!
Recently been sorted by MJ Racing
http://www.facebook.com/pages/Mj-racing/263167603708961
Just a basic spec up and some repairs, but hopefully stuff that will make a difference....
Crankseal leak sorted
New clutch
Stupid bike can backbox fitted properly
Dished wheel and boss
E30 15" BBS
195/45-15 Maxxis MAZ1 fronts
195/50-15 Retreads at the rear
Landrover front shocks on the rear
Front inserts refilled with diff oil
-75mm 250lb front springs
New brakes
Tartan rug on the back seat straightened out....
Here it is after being collected with the new V8 Range
And some snaps when from when I had it out...
Crail on Sunday, so will see how it drifts on track then....
Recently been sorted by MJ Racing
http://www.facebook.com/pages/Mj-racing/263167603708961
Just a basic spec up and some repairs, but hopefully stuff that will make a difference....
Crankseal leak sorted
New clutch
Stupid bike can backbox fitted properly
Dished wheel and boss
E30 15" BBS
195/45-15 Maxxis MAZ1 fronts
195/50-15 Retreads at the rear
Landrover front shocks on the rear
Front inserts refilled with diff oil
-75mm 250lb front springs
New brakes
Tartan rug on the back seat straightened out....
Here it is after being collected with the new V8 Range
And some snaps when from when I had it out...
Crail on Sunday, so will see how it drifts on track then....
Re: 2.3 Turbo drift 360
Good luck dude, hopefully doing the 2.3 conversion at some point on my 360 too. I've got a similar setup to you as well.
Re: 2.3 Turbo drift 360
Looks nice on them 15" E30 wheels
1989 - Volvo 360 GLT
1985 - Volvo 360 GLS
2008 - Volvo S60 SE Lux
1985 - Volvo 360 GLS
2008 - Volvo S60 SE Lux