Julian

A global place for general discussion (Volvo, V3M or non-Volvo related topics).
Please introduce yourself here, your Volvo 300 hobby...
NO technical support, parts requests or car advertisements here
Post Reply
Julian Breindl
Posts: 8
Joined: 28 Apr 2014 07:26 pm
Location: Deutschlan, Kassel

Julian

Post by Julian Breindl » 29 Apr 2014 08:56 pm

Hey everyone!
I am Julian.
Until now i was the one with the Motorcicle, first a Simson S50
IMGP2629.JPG
and later a MZ TS 250
IMGP2597.JPG
But because of a few accudents I decidet to drive in dayly use my Volvo 340
IMGP2872.JPG
But there I have some problems with the driving shaft (I hope taht this is the right word for Transaxlewelle, or Kardanwelle)
And so I am here ;)

macplaxton
Posts: 3283
Joined: 09 Feb 2008 02:29 am

Re: Julian

Post by macplaxton » 29 Apr 2014 09:50 pm

Hi Julian,
Julian Breindl wrote:But because of a few accudents)
That'll be the Pneumant tyres! :lol: :lol: :lol:
Julian Breindl wrote:I have some problems with the driving shaft (I hope taht this is the right word for Transaxlewelle, or Kardanwelle)
The shaft between engine and transaxle? Propshaft (comes from propeller shaft) Unless you mean a driveshaft, which is the short shaft with a CV joint either end which goes between transaxle and each wheel.
72 DAF 44 Estate 78 Volvo 343DL Black BeautyImageImage
82 Volvo 343DL CVTImageImage 88 Volvo 340DL Diesel

Julian Breindl
Posts: 8
Joined: 28 Apr 2014 07:26 pm
Location: Deutschlan, Kassel

Re: Julian

Post by Julian Breindl » 30 Apr 2014 12:33 pm

Hey
so I mean the propshaft, thanks for the explanation ;)
And i forgot to mention that my Volvo is a manual one

360beast
Posts: 873
Joined: 27 Dec 2013 08:40 pm

Re: Julian

Post by 360beast » 30 Apr 2014 01:01 pm

Hi Julian welcome aboard.

If you are having problems with the propshaft then chances are your engine mounts are shot.

Julian Breindl
Posts: 8
Joined: 28 Apr 2014 07:26 pm
Location: Deutschlan, Kassel

Re: Julian

Post by Julian Breindl » 30 Apr 2014 03:04 pm

Because of that i contactet GKN in Kassel to balance(?right word?) it, but they said that it wouldnt work because there is dent in it. I got the propshaft from a scrapyard, and there they put the 340 in which it was above another car ;(
And now I search for a new propshaft

Post Reply