Hey everyone!
I am Julian.
Until now i was the one with the Motorcicle, first a Simson S50 and later a MZ TS 250
But because of a few accudents I decidet to drive in dayly use my Volvo 340
But there I have some problems with the driving shaft (I hope taht this is the right word for Transaxlewelle, or Kardanwelle)
And so I am here
Julian
-
- Posts: 3283
- Joined: 09 Feb 2008 02:29 am
Re: Julian
Hi Julian,
That'll be the Pneumant tyres!Julian Breindl wrote:But because of a few accudents)
The shaft between engine and transaxle? Propshaft (comes from propeller shaft) Unless you mean a driveshaft, which is the short shaft with a CV joint either end which goes between transaxle and each wheel.Julian Breindl wrote:I have some problems with the driving shaft (I hope taht this is the right word for Transaxlewelle, or Kardanwelle)
-
- Posts: 8
- Joined: 28 Apr 2014 07:26 pm
- Location: Deutschlan, Kassel
Re: Julian
Hey
so I mean the propshaft, thanks for the explanation
And i forgot to mention that my Volvo is a manual one
so I mean the propshaft, thanks for the explanation
And i forgot to mention that my Volvo is a manual one
Re: Julian
Hi Julian welcome aboard.
If you are having problems with the propshaft then chances are your engine mounts are shot.
If you are having problems with the propshaft then chances are your engine mounts are shot.
-
- Posts: 8
- Joined: 28 Apr 2014 07:26 pm
- Location: Deutschlan, Kassel
Re: Julian
Because of that i contactet GKN in Kassel to balance(?right word?) it, but they said that it wouldnt work because there is dent in it. I got the propshaft from a scrapyard, and there they put the 340 in which it was above another car ;(
And now I search for a new propshaft
And now I search for a new propshaft