Hey Guys!
Long time since I last posted here.
How are you doing? - I see some new folks in here
For those who don't remember me(my car):
I have a question guys: is the part, the so called "spoiler" marked with red is changeble or is it velded to the chasis?
In VADIS in the body grafic, it seems to be separate.
Here is the drawing
Here is the drawing from VADIS:
It is part no. 12
Thanks in advance for your answers. Bye[/img]
Long time...
-
- Posts: 62
- Joined: 12 Jul 2005 11:21 pm
- Location: romania
- Contact:
Long time...
84' 360 GLS (B200K) saloon
Hey mate, it looks like you car was repaired well ( I think I remember you were in an accident that bent the rear?)
The front part you show can be separated, but you need to cut the spot welds that hold it on.
The front part you show can be separated, but you need to cut the spot welds that hold it on.
'89(G) 340 GLE B172k
'03 S60 D5 SE, '91 (J) MX5, 1954 Cyclemaster
Ex:
'89(F) 340 GL F7R (ex B172k) - Fake -> SBKV 300 Runner Up 08, 12; '91(H) 340 GL B14.4E - Kar; '88(F) 360 GLT B200E - Jet -> BKV 300 Runner Up 09; '89(G) 360 GLT B200E - Beast
'03 S60 D5 SE, '91 (J) MX5, 1954 Cyclemaster
Ex:
'89(F) 340 GL F7R (ex B172k) - Fake -> SBKV 300 Runner Up 08, 12; '91(H) 340 GL B14.4E - Kar; '88(F) 360 GLT B200E - Jet -> BKV 300 Runner Up 09; '89(G) 360 GLT B200E - Beast
-
- Posts: 62
- Joined: 12 Jul 2005 11:21 pm
- Location: romania
- Contact:
Hi Cris.
Yes, you are right, the end was bent, but now it is ok, they did a pretty good job, although, not perfect... the crome from the bumber is missing pluss the weldings in the trunk are a bit messy...
Is it a big mess to cut it down? Does it worth it or is it more easy to cut just the lower end and weld some sheet of metal there?
Yes, you are right, the end was bent, but now it is ok, they did a pretty good job, although, not perfect... the crome from the bumber is missing pluss the weldings in the trunk are a bit messy...
Is it a big mess to cut it down? Does it worth it or is it more easy to cut just the lower end and weld some sheet of metal there?
84' 360 GLS (B200K) saloon