My car so far
-
- Posts: 137
- Joined: 29 Feb 2004 03:04 am
- Location: Shrewsbury, Shropshire, England
My car so far
green cotton induction cone (removed air box
and intake pipe)
Smoked black indicators, side repeaters & rear clusters
Kenwood KDC-791 head unit
KDC-C717 10CD changer (mounted in glove box)
17''x7.5'' wolfrace alloy wheels with 205/40 tyres
Delocked passenger door side (used rear door handle assembly)
Removed badges from boot
If anyone has any suggestions for modifications or mods they have done to their 340/360 let
me know, my ideas list is a mile long but could always do with some more input
Thanks
Al
and intake pipe)
Smoked black indicators, side repeaters & rear clusters
Kenwood KDC-791 head unit
KDC-C717 10CD changer (mounted in glove box)
17''x7.5'' wolfrace alloy wheels with 205/40 tyres
Delocked passenger door side (used rear door handle assembly)
Removed badges from boot
If anyone has any suggestions for modifications or mods they have done to their 340/360 let
me know, my ideas list is a mile long but could always do with some more input
Thanks
Al
'87 360 GLT (5dr), 100k - SOLD
'89 360 GLT (5dr), 145k - SOLD
'88 360 GLT (5dr), (B200E),16''rims. smoked lights- FOR SALE
'83 360 GLS (5dr), 127k (B19) - FOR SALE
'89 360 GLT (5dr), 145k - SOLD
'88 360 GLT (5dr), (B200E),16''rims. smoked lights- FOR SALE
'83 360 GLS (5dr), 127k (B19) - FOR SALE
Re: My car so far
Whit what offset?Black_360_GLT wrote: 17''x7.5'' wolfrace alloy wheels with 205/40 tyres
360 GLT TIC
-
- Posts: 137
- Joined: 29 Feb 2004 03:04 am
- Location: Shrewsbury, Shropshire, England
Offset is 35 I think.
It wasnt a straight forward fit, I needed 5mm spacers on the front and oversized nuts welded
onto the hub.
The back arches dont catch the arches but the front still catch if you take corners hard or go
over pot holes, so I am going to have my arches rolled, then they will be fine.
Il put a pic of my car on the forum soon.
Thanks for reply.
Alex
It wasnt a straight forward fit, I needed 5mm spacers on the front and oversized nuts welded
onto the hub.
The back arches dont catch the arches but the front still catch if you take corners hard or go
over pot holes, so I am going to have my arches rolled, then they will be fine.
Il put a pic of my car on the forum soon.
Thanks for reply.
Alex
'87 360 GLT (5dr), 100k - SOLD
'89 360 GLT (5dr), 145k - SOLD
'88 360 GLT (5dr), (B200E),16''rims. smoked lights- FOR SALE
'83 360 GLS (5dr), 127k (B19) - FOR SALE
'89 360 GLT (5dr), 145k - SOLD
'88 360 GLT (5dr), (B200E),16''rims. smoked lights- FOR SALE
'83 360 GLS (5dr), 127k (B19) - FOR SALE
Cant be 35, i had 7" offset 35 and there was one millimeter between the tire and the shock..Black_360_GLT wrote:Offset is 35 I think.
It wasnt a straight forward fit, I needed 5mm spacers on the front and oversized nuts welded
onto the hub.
So half inch is about 1,25 cm= u have to put 12,5mm spacers in front..
360 GLT TIC
-
- Posts: 137
- Joined: 29 Feb 2004 03:04 am
- Location: Shrewsbury, Shropshire, England
Well, I have 5mm spacers on the front to clear the shocks
and I have 13mm bolts welded onto the hub, so my wheels fit ok, but on extreme cornering
and bumps in the road the arches rub so I am having the arches rolled on the front.
and I have 13mm bolts welded onto the hub, so my wheels fit ok, but on extreme cornering
and bumps in the road the arches rub so I am having the arches rolled on the front.
'87 360 GLT (5dr), 100k - SOLD
'89 360 GLT (5dr), 145k - SOLD
'88 360 GLT (5dr), (B200E),16''rims. smoked lights- FOR SALE
'83 360 GLS (5dr), 127k (B19) - FOR SALE
'89 360 GLT (5dr), 145k - SOLD
'88 360 GLT (5dr), (B200E),16''rims. smoked lights- FOR SALE
'83 360 GLS (5dr), 127k (B19) - FOR SALE
-
- Posts: 137
- Joined: 29 Feb 2004 03:04 am
- Location: Shrewsbury, Shropshire, England
I have had the arches grinded and they are not catching on
the front now, cost me £30 and they wax oiled the arches for rust proofing too.
So, you can fit 17inch wheels on a 360 without too much hassle, I am not sure how the car will
cope when its lowered 40mm, just have to wait and see
the front now, cost me £30 and they wax oiled the arches for rust proofing too.
So, you can fit 17inch wheels on a 360 without too much hassle, I am not sure how the car will
cope when its lowered 40mm, just have to wait and see
'87 360 GLT (5dr), 100k - SOLD
'89 360 GLT (5dr), 145k - SOLD
'88 360 GLT (5dr), (B200E),16''rims. smoked lights- FOR SALE
'83 360 GLS (5dr), 127k (B19) - FOR SALE
'89 360 GLT (5dr), 145k - SOLD
'88 360 GLT (5dr), (B200E),16''rims. smoked lights- FOR SALE
'83 360 GLS (5dr), 127k (B19) - FOR SALE
-
- Website Admin
- Posts: 2260
- Joined: 29 Dec 2003 01:33 am
- Location: Country of Duvel beer > Belgium <
- Contact:
I hope to see your 360 GLT very soon!Black_360_GLT wrote: Il put a pic of my car on the forum soon.
Collection: '78 343 Black Beauty, '82 345 GLS, '83 340 DL 2.0, '84 340 DL vario, '88 360 GLT 5d (2x) & 4d (2x), '89 GLT, '91 340 vario
Dad's cars: '87 340 vario, '89 340 vario
Lot of donors cars and parts...
V3M for life!
Dad's cars: '87 340 vario, '89 340 vario
Lot of donors cars and parts...
V3M for life!
-
- Posts: 137
- Joined: 29 Feb 2004 03:04 am
- Location: Shrewsbury, Shropshire, England
-
- Posts: 137
- Joined: 29 Feb 2004 03:04 am
- Location: Shrewsbury, Shropshire, England
-
- Posts: 137
- Joined: 29 Feb 2004 03:04 am
- Location: Shrewsbury, Shropshire, England
Added Volvo 300 side skirts. 5inch 160W Kenwood dual mag components and Kenwood dash mounted tweeters.
Front and rear Volvo 300 skirts soon to follow, plus mesh grille.
Front and rear Volvo 300 skirts soon to follow, plus mesh grille.
'87 360 GLT (5dr), 100k - SOLD
'89 360 GLT (5dr), 145k - SOLD
'88 360 GLT (5dr), (B200E),16''rims. smoked lights- FOR SALE
'83 360 GLS (5dr), 127k (B19) - FOR SALE
'89 360 GLT (5dr), 145k - SOLD
'88 360 GLT (5dr), (B200E),16''rims. smoked lights- FOR SALE
'83 360 GLS (5dr), 127k (B19) - FOR SALE