Page 1 of 3

Volvo Oil Pressure & Temperature Gauges

Posted: 19 Apr 2004 11:28 am
by Volvo 360 GL B200K
Hey Guys, I am looking for the oil pressure and temperature gauges that fit into the tunnel console on either a volvo 340 or 360! I am willing to pay good prices for both of these gauges and their relevant sender units, or if anyone knows of where these gauges can be obtained economically, i would be most greatful for the help! Pictures of the relevant gauges canbe found on this site at http://www.volvo300mania.com/access89b.htm !

Thanks Guys, Happy Motoring!

Posted: 27 Apr 2004 02:21 pm
by 5lab
i dunno if this would work but i've seen lots of 2**/7** cars in scrapheaps with these gauges in the centre tunnel - might possably be compatible?

Posted: 02 May 2004 01:37 am
by foggyjames
Where are you located? I might be able to source a kit (given some time).

cheers

James

Posted: 03 May 2004 12:21 am
by Volvo 360 GL B200K
I am located in North Yorkshire, and my email address is Volvo360glt@Hotmail.com, if you could email me asap, and let me know of the details, and your location.

Cheers & Happy Motoring

Posted: 03 May 2004 01:34 pm
by foggyjames
Email sent.

5lab, you're quite right, the 200 series 52mm VDO gauges are the same ones as in the 300 series catalogue. The really hard part is not finding the gauges, its finding a) the twin gauge panel, and b) the senders at anything other than silly prices. I just bought a new pressure sender for £40 from VDO!

The (stock) 700 ones aren't the same though, as these live in the gauge cluster (rather like the 360 ones here on my car):
Image
Actually.....exactly like this (note...this is a modified boost gauge).
Image

cheers!

James

Posted: 31 May 2004 01:56 pm
by Duvel78
I just have bought on Ebay the oil temperature gauge with the panel (ok, it was very expensive but it was new...)

Image

Now I have to find the oil pressure gauge and the voltmeter (will be easier to find on the 200 series)

I'm looking for a good solution so I can put the 3 gauges... There is only the place for 2... Any suggestions are welcome!!

Posted: 31 May 2004 02:19 pm
by foggyjames
Either...
a) Put the voltmeter (not so important / smooth looking) on a panel in the glove box
b) Buy a A-pillar mount, and put the oil temperature and turbo boost gauges there...yeah....you heard :wink:

cheers

James

Posted: 31 May 2004 02:42 pm
by Duvel78
And what about this? The voltmeter screwed under the dashboard, in a black box... Not too ugly?

Image

Posted: 31 May 2004 03:11 pm
by Volvo 360 GL B200K
What may work, if you look at the gauge mounts for the 200 series gauges, they are nearly exactly the same shape and size as the ash tray! I was thinking about removing that and putting a voltmeter in the 200 mount in place of the ashtray! After all there is an ash trya in the rear!

Any Help?

Cheers

Posted: 31 May 2004 03:34 pm
by foggyjames
That's what I was about to post :)

cheers

James

Posted: 31 May 2004 04:18 pm
by Duvel78
Good idea...

And what about this solution: the gauge mounted horizontally, the 2 spaces for the switches are totally unecessary! (or for fake switches maybe sm61 )

Image

Posted: 31 May 2004 04:22 pm
by foggyjames
It won't fit there unless you hack up the tunnel console...

How about putting the radio in the bottom hole (where the gauges are in that pic), and using the 3-gauge panel from a 240 to put the gauges where the radio ought to be.

I should be charging commission on the use of that image :P

cheers

James

Posted: 31 May 2004 04:24 pm
by foggyjames
Oh yeah, Aymat...I'll probably have a Voltmeter for you in a week or two...£25?

cheers

James

Posted: 31 May 2004 04:46 pm
by Duvel78
Ok, sold if it's this one with the complete wiring...

Image

Posted: 31 May 2004 04:51 pm
by Volvo 360 GL B200K
Even without the wiring it shouldn't be to complicated to wire the voltmeter without the wiring, as theoretically it should just be wired across the battery! And as for the light, u can just take a feed of the clock, cigarette or ash tray light! I may be wrong...

Cheers