WANTED: diff output flange
WANTED: diff output flange
Needing a diff output flange for my 360... (but 340 is just the same so I've since found out!)
One would be good, two would be perfect!
Anyone?
One would be good, two would be perfect!
Anyone?
Last edited by Ade on 28 Nov 2012 12:26 am, edited 3 times in total.
Re: WANTED: 360 output flange
Anyone know if this is shared with models other than the 2.0 360?
Re: WANTED: 360 output flange
Diff output? Good luck dude, you're better off trying to find a complete diff. Nobody has half broken diffs lying around unfortunately
To answer your question, I'm not 100% on this but yes I believe they are the same across the board, 340 and 360.
To answer your question, I'm not 100% on this but yes I believe they are the same across the board, 340 and 360.
Re: WANTED: 360 output flange
Well either this or a complete diff.
Need to get the car back up and running!
Need to get the car back up and running!
Re: WANTED: 360 output flange
Pretty sure they are all the same but there are 2 part numbers in the -'85 catalogue
3284959 - 8 -> Up to Chassis # 597180
3296509 - 7 -> B14 M45R ch. # 826226 onwards
-> B14 M47R ch. # 825898 onwards
-> B19 M45R ch. # 825898 onwards
-> B19 M47R ch. # 826716 onwards
But in the -'91 catalogue there is only the latter mentioned so I'd presume they all fit all diffs.
I'm guessing the earlier one is the one with a recess machined in for a gasket like the CVT's have. They used to use em on the MT diffs for a while i think. So presumably they'd fit but you'd need gaskets for them too.
Hope that helps
Matt
3284959 - 8 -> Up to Chassis # 597180
3296509 - 7 -> B14 M45R ch. # 826226 onwards
-> B14 M47R ch. # 825898 onwards
-> B19 M45R ch. # 825898 onwards
-> B19 M47R ch. # 826716 onwards
But in the -'91 catalogue there is only the latter mentioned so I'd presume they all fit all diffs.
I'm guessing the earlier one is the one with a recess machined in for a gasket like the CVT's have. They used to use em on the MT diffs for a while i think. So presumably they'd fit but you'd need gaskets for them too.
Hope that helps
Matt
'88 360 +T LSD - sold
'87 760 TDI (D24TIC) - sold
'04 V40 D sport (F9Q, decat, Remapped, launch control)
'89 740 SE (b230ft, 12psi, V-cam, headwork, 'remapped', banded steels)
'86 340 DL 1.4
'87 760 TDI (D24TIC) - sold
'04 V40 D sport (F9Q, decat, Remapped, launch control)
'89 740 SE (b230ft, 12psi, V-cam, headwork, 'remapped', banded steels)
'86 340 DL 1.4
Re: WANTED: 360 output flange
Is this a part that is likely to be source-able from a factors or Volvo? Or is this going to be a used part only?
Re: WANTED: 360 output flange
I tried at my local volvo dealer and he said they were no longer available.
Doubt a factors would stock such a part, if any company ever re-manufactured them other than volvo.
Best bet's a used diff - even one that's buggered - as long as those parts are ok.
Doubt a factors would stock such a part, if any company ever re-manufactured them other than volvo.
Best bet's a used diff - even one that's buggered - as long as those parts are ok.
'88 360 +T LSD - sold
'87 760 TDI (D24TIC) - sold
'04 V40 D sport (F9Q, decat, Remapped, launch control)
'89 740 SE (b230ft, 12psi, V-cam, headwork, 'remapped', banded steels)
'86 340 DL 1.4
'87 760 TDI (D24TIC) - sold
'04 V40 D sport (F9Q, decat, Remapped, launch control)
'89 740 SE (b230ft, 12psi, V-cam, headwork, 'remapped', banded steels)
'86 340 DL 1.4
Re: WANTED: 360 output flange
Thought that might be the case.
Happy to pay decent money for one (or preferably two!) posted to Glasgow.
Happy to pay decent money for one (or preferably two!) posted to Glasgow.
-
- *** V3M DONOR ***
- Posts: 5461
- Joined: 25 Apr 2005 06:52 pm
- Location: Anglesey North Wales
- Contact:
Re: WANTED: diff output flange
Have you managed to find one as yet? If not I should have a complete diff.
Dai
Please email me directly on dai@classicswede.co.uk
http://www.classicswede.com
phone/text 07824887160
Web shop http://www.classicswede.co.uk/
Please email me directly on dai@classicswede.co.uk
http://www.classicswede.com
phone/text 07824887160
Web shop http://www.classicswede.co.uk/
Re: WANTED: diff output flange
Nope, sent out tons of emails, but nothing sourced as yet.
Ideally 2 flanges would be great so I have a spare sitting.
Will consider a whole diff if it comes to it....
Ideally 2 flanges would be great so I have a spare sitting.
Will consider a whole diff if it comes to it....
-
- *** V3M DONOR ***
- Posts: 5461
- Joined: 25 Apr 2005 06:52 pm
- Location: Anglesey North Wales
- Contact:
Re: WANTED: diff output flange
I do have a spares car so could remove and post, would be faster to send as a complete diff unit.
Dai
Please email me directly on dai@classicswede.co.uk
http://www.classicswede.com
phone/text 07824887160
Web shop http://www.classicswede.co.uk/
Please email me directly on dai@classicswede.co.uk
http://www.classicswede.com
phone/text 07824887160
Web shop http://www.classicswede.co.uk/
Re: WANTED: diff output flange
Just let me know how much!
-
- *** V3M DONOR ***
- Posts: 5461
- Joined: 25 Apr 2005 06:52 pm
- Location: Anglesey North Wales
- Contact:
Re: WANTED: diff output flange
PM sent
Dai
Please email me directly on dai@classicswede.co.uk
http://www.classicswede.com
phone/text 07824887160
Web shop http://www.classicswede.co.uk/
Please email me directly on dai@classicswede.co.uk
http://www.classicswede.com
phone/text 07824887160
Web shop http://www.classicswede.co.uk/