RUBBER RING FOR ONE SIDE OF EXHAUST
RUBBER RING FOR ONE SIDE OF EXHAUST
I need a rubber ring that holds one side of the exhaust to the car at the rear end as my old one has split. I may try super glueing it back together? The part number is 224353...
I suppose I could always use a zip-tie although that'll probably be an mot failure?...
I suppose I could always use a zip-tie although that'll probably be an mot failure?...
1988 340 1.4 DL
(I suffer with O.C.D. which makes me obsessed with fine detail)
(Diagrams or photos are far more helpful to me when it comes to cars)
(I suffer with O.C.D. which makes me obsessed with fine detail)
(Diagrams or photos are far more helpful to me when it comes to cars)
-
- Posts: 3283
- Joined: 09 Feb 2008 02:29 am
Re: RUBBER RING FOR ONE SIDE OF EXHAUST
The number moulded on it is a legacy number from the DAF days.
The actual Volvo part number was 3100099, but I think they are an obsolete part. Go down to your local motor factors / parts accessory shop / ebay / Halfords and ask for:
Bosal 255-397 or equivalent.
I bought two the other day from my local factors and they were only 74 eurocent each (60 cent + 23% VAT here)
The actual Volvo part number was 3100099, but I think they are an obsolete part. Go down to your local motor factors / parts accessory shop / ebay / Halfords and ask for:
Bosal 255-397 or equivalent.
I bought two the other day from my local factors and they were only 74 eurocent each (60 cent + 23% VAT here)
Re: RUBBER RING FOR ONE SIDE OF EXHAUST
Many thanks...
Would a zip-tie be an MOT failure?...
Would a zip-tie be an MOT failure?...
1988 340 1.4 DL
(I suffer with O.C.D. which makes me obsessed with fine detail)
(Diagrams or photos are far more helpful to me when it comes to cars)
(I suffer with O.C.D. which makes me obsessed with fine detail)
(Diagrams or photos are far more helpful to me when it comes to cars)
Re: RUBBER RING FOR ONE SIDE OF EXHAUST
I'd imagine so. its not OE and the exhaust heat may well melt it.
Own:
86 360GLT
97 S90
92 960S, Royal
01 Subaru Lancaster 6
96 Volvo 854R
Owned
E90 320 M-sport wagon
S60T -Mazda Familia
850lpt -AU Falcon
855T5 -91, 95, 97 960
940TIC -Mitsi GTO TT
16x 360-Toyota corolla
Toyota corona-R32 Skyline
V70R -V70T5
86 360GLT
97 S90
92 960S, Royal
01 Subaru Lancaster 6
96 Volvo 854R
Owned
E90 320 M-sport wagon
S60T -Mazda Familia
850lpt -AU Falcon
855T5 -91, 95, 97 960
940TIC -Mitsi GTO TT
16x 360-Toyota corolla
Toyota corona-R32 Skyline
V70R -V70T5
Re: RUBBER RING FOR ONE SIDE OF EXHAUST
Hi Justin,
Halfords do generic fit brackets, they're about £1.30 each and they've gotten plenty of my cars through MOTs.
Halfords do generic fit brackets, they're about £1.30 each and they've gotten plenty of my cars through MOTs.
-
- Posts: 3283
- Joined: 09 Feb 2008 02:29 am
Re: RUBBER RING FOR ONE SIDE OF EXHAUST
Dimensions 66mm OD x 40mm ID. Cross section diameter 12mm is one set of measurements I have and another is Dimensions 65mm OD x 41mm ID. Cross section diameter 13mm
Walker 81223
Arvin / Klarius 420164
If you're really stuck...
Walker 81223
Arvin / Klarius 420164
If you're really stuck...
Re: RUBBER RING FOR ONE SIDE OF EXHAUST
Thanks everyone, amazingly super glue has held and joined the ring back together!
Its actually just a medium sized oval shaped rubber ring that sits right at the far back of the car connecting one side of the exhaust to the body...
Its actually just a medium sized oval shaped rubber ring that sits right at the far back of the car connecting one side of the exhaust to the body...
1988 340 1.4 DL
(I suffer with O.C.D. which makes me obsessed with fine detail)
(Diagrams or photos are far more helpful to me when it comes to cars)
(I suffer with O.C.D. which makes me obsessed with fine detail)
(Diagrams or photos are far more helpful to me when it comes to cars)
Re: RUBBER RING FOR ONE SIDE OF EXHAUST
I'd get that replaced fairly soon, the constant vibration on the rubber whilst under tension and with a weak spot will eventually break it open.This time it might be on the road and you'll have to replace it anyway.
Re: RUBBER RING FOR ONE SIDE OF EXHAUST
Not to mention exhausts are a lot more expensive than rubber rings when they fatigue.
'89(G) 340 GLE B172k
'03 S60 D5 SE, '91 (J) MX5, 1954 Cyclemaster
Ex:
'89(F) 340 GL F7R (ex B172k) - Fake -> SBKV 300 Runner Up 08, 12; '91(H) 340 GL B14.4E - Kar; '88(F) 360 GLT B200E - Jet -> BKV 300 Runner Up 09; '89(G) 360 GLT B200E - Beast
'03 S60 D5 SE, '91 (J) MX5, 1954 Cyclemaster
Ex:
'89(F) 340 GL F7R (ex B172k) - Fake -> SBKV 300 Runner Up 08, 12; '91(H) 340 GL B14.4E - Kar; '88(F) 360 GLT B200E - Jet -> BKV 300 Runner Up 09; '89(G) 360 GLT B200E - Beast
Re: RUBBER RING FOR ONE SIDE OF EXHAUST
Blimey. Im still not convinced I can source one as the part name and number that macplaxton kindly supplied (Bosal 255-397 ) comes up with a much thicker rubber ring with two holes inside it when typed into ebay as opposed to a medium sized oval rubber ring?...
1988 340 1.4 DL
(I suffer with O.C.D. which makes me obsessed with fine detail)
(Diagrams or photos are far more helpful to me when it comes to cars)
(I suffer with O.C.D. which makes me obsessed with fine detail)
(Diagrams or photos are far more helpful to me when it comes to cars)
-
- Posts: 3283
- Joined: 09 Feb 2008 02:29 am
Re: RUBBER RING FOR ONE SIDE OF EXHAUST
Show me the link please.
Re: RUBBER RING FOR ONE SIDE OF EXHAUST
I had a look at the Halfords ones yesterday and they are apparently 50mm, will this do?...Speedy88 wrote:Hi Justin,
Halfords do generic fit brackets, they're about £1.30 each and they've gotten plenty of my cars through MOTs.
1988 340 1.4 DL
(I suffer with O.C.D. which makes me obsessed with fine detail)
(Diagrams or photos are far more helpful to me when it comes to cars)
(I suffer with O.C.D. which makes me obsessed with fine detail)
(Diagrams or photos are far more helpful to me when it comes to cars)
-
- Posts: 3283
- Joined: 09 Feb 2008 02:29 am
Re: RUBBER RING FOR ONE SIDE OF EXHAUST
yesJustin wrote:I had a look at the Halfords ones yesterday and they are apparently 50mm, will this do?...