Hi again.
Has anyone got a scrap manual 340 gearbox which they are going to throw away by any chance. I need the cover from the diff for my car. It has rusted and weakened just below the filler plug and now it is leaking a little. I imagine that I will need to remove it and then solder or weld it up but obviously a good second hand one would be the easiest option.
Mark
gearbox part required
-
- *** V3M DONOR ***
- Posts: 5461
- Joined: 25 Apr 2005 06:52 pm
- Location: Anglesey North Wales
- Contact:
Re: gearbox part required
The most common issue is for the cover to get bent where some ATS / Quickfit numpty has jacked the car up on the diff. If you can weld then best to take it off and weld up the hole. Make sure you get yourself a gasket kit first ready for refitting
Dai
Please email me directly on dai@classicswede.co.uk
http://www.classicswede.com
phone/text 07824887160
Web shop http://www.classicswede.co.uk/
Please email me directly on dai@classicswede.co.uk
http://www.classicswede.com
phone/text 07824887160
Web shop http://www.classicswede.co.uk/