Heater blower metal clips

Put here your advertisements to buy cars and parts
Post Reply
User avatar
TasMan
Posts: 203
Joined: 04 Jun 2019 06:09 pm
Location: Ayr, SW Scotland

Heater blower metal clips

Post by TasMan » 18 Dec 2019 11:57 am

I have my heater blower unit removed and have noticed I am missing a few of the metal clips. Some of the ones I have are fairly rusty/weakened. Looking for a few spares to complete the set and replace the weak ones, or ideally a full set and I can make a good set up from what I have.
PM me if you can help, much appreciated. Dave
Image
1987 360 GLT

User avatar
bogbasic
Posts: 1861
Joined: 21 Nov 2004 10:12 pm
Location: New Malden, Surrey.
Contact:

Re: Heater blower metal clips

Post by bogbasic » 13 Jan 2020 09:27 pm

Well, today I found 4. I can send a couple as these are my last ones but it might be worth e-mailing Dai at Classicswede in case he has a load of them. Also, it seems you can get them from Onderdelen:

https://www.volvo340onderdelen.nl/en/cl ... 4-nos.html
1988 340 1.4 GL, 218k, 5 door (Grey Bess). Gone to CBA.
1991 340 1.7 GL, 64k, 5 door, petrol blue (Deep Blue).
1988 360 2.0 GLE, 140k, 5 door, ocean blue metallic (Blue Bess).
1989 340 1.7 GL, 108k, 3 door (Red Ness).
More info here!

User avatar
TasMan
Posts: 203
Joined: 04 Jun 2019 06:09 pm
Location: Ayr, SW Scotland

Re: Heater blower metal clips

Post by TasMan » 15 Jan 2020 10:15 pm

Thanks for the reply Jon. As it turned out I got a few from someone via FB and just yesterday I have ordered a few bits from Onderdelen so I added a few clips to my order. Should have plenty now and a few spares. Will be putting the blower assembly back together next week. The leaking heater valve is now also replaced, used a couple of small hose clamps to pinch off the hoses for minimal coolant loss, done in about 15 mins! Cheers Dave
1987 360 GLT

Post Reply