Page 1 of 1

340/60 side repeater bulb holders needed!

Posted: 26 Feb 2005 08:36 pm
by catgroom
Hi Everyone!!!!

I need a pair of good condition bulb holders from front side repeaters of 340/60.

Im from 480 Club Europe,Im doing a small light conversion to get those rear quarter reflectors flashing with the indicators.Another excuse for someone NOT to ram my pride and joy! :lol:

Im on 07771 633289 or catgroom@fsmail.net

Cheers!
Steve (catgroom)

www.catgroom.co.uk

Posted: 04 Mar 2005 01:17 pm
by foggyjames
If no-one else is coming forward, I can sort you out!

cheers

James

Posted: 06 Mar 2005 03:38 pm
by Chesh740R
I did this mod to both my 480's.

Not to sure about the side repeaters bulb holders.


I used the rear numberplate light bulb holders and cut the wiring back far enough to give me a decent pig tail with which i was then able to solder on the circuit tracks of the 480's light board.

You can of course have them as side marker lights, but i allways preffered them as indicators.

I never did get round to finding a brighter bulb than the 5w numberplate lights that fits in the bulb holder, allthough i'm sure there available. 21w would be great.