revlimters...

Rust problems and repairs, leaky sunroof... Battery, starter, lights, fuses, airco, heating unit, stereo... | Tuning: custom spoilers & bodykits, fiberglass parts...
NO parts requests here, please use our V3M BUY & SELL corner
Post Reply
Scottyj
Posts: 62
Joined: 10 Jan 2009 06:31 pm

revlimters...

Post by Scottyj »

Hello again people,

I don't think my 1.7 340 has a rev limiter, but is there anyway of getting a ignition cut or other rev limiter even though i have no ecu?

Cheers scott
User avatar
Jonofdoom
Posts: 177
Joined: 15 Feb 2009 09:05 am

Re: revlimters...

Post by Jonofdoom »

Ok so I'm an idiot with these kind of things so don't take my word for it, but i believe you can get rev limiters that sense your revs from the dizzy, and cut the spark at a given RPM... Again I'm not 100% on this, but I think that's one way of doing it in the aircooled VW world, where ECU's are quite unusual.

Although I must add I've only 74 posts on this forum, and at least %80 of them have been wrong:D
volvosneverdie
*** V3M DONOR ***
Posts: 9143
Joined: 11 Nov 2008 04:22 pm
Location: Newcastle Upon Toon

Re: revlimters...

Post by volvosneverdie »

Jonofdoom wrote:
Although I must add I've only 74 posts on this forum, and at least %80 of them have been wrong:D
im up to 86% failrate mate, so youre doing quite canny. :D
Image
User avatar
Jonofdoom
Posts: 177
Joined: 15 Feb 2009 09:05 am

Re: revlimters...

Post by Jonofdoom »

Whey:D
User avatar
volvodspec
Posts: 1921
Joined: 06 Dec 2008 09:35 pm
Location: Netherlands.
Contact:

Re: revlimters...

Post by volvodspec »

all ignitions used in 300 series can be equipped with rev limiters.

these aftermarket parts are usually attached to the coil + and coil - and have an extra wire for ground. adding a rev limiter can easaly be done on the older cars (343,345, early 340) because they have a loose coil. the later 300's equipped with the RENIX ignition systems can be equipped in similar way, though the coil + and - are a bit harder to properly connect the 2 wires to.
Scottyj
Posts: 62
Joined: 10 Jan 2009 06:31 pm

Re: revlimters...

Post by Scottyj »

Cool so can anyone point me in the direction of one or how to make one?

Its an 89 340 with a b172 lump...

Want ignition cut limiter or that kind of thing really, just mine screams and vibrates a lot high up and just want to set it low so i feel safe when giving it the beans..
Scottyj
Posts: 62
Joined: 10 Jan 2009 06:31 pm

Re: revlimters...

Post by Scottyj »

Scottyj
Posts: 62
Joined: 10 Jan 2009 06:31 pm

Re: revlimters...

Post by Scottyj »

right from what i can gather that limiter will work, will i need a single or dual coil?
User avatar
volvodspec
Posts: 1921
Joined: 06 Dec 2008 09:35 pm
Location: Netherlands.
Contact:

Re: revlimters...

Post by volvodspec »

i have that omex unit with launch control :D

you need single coil.
Scottyj
Posts: 62
Joined: 10 Jan 2009 06:31 pm

Re: revlimters...

Post by Scottyj »

Cool worth it yeah? i dunno whether to bother with launch control or not... might just get the clubman..

How easy was it to fit?
Scottyj
Posts: 62
Joined: 10 Jan 2009 06:31 pm

Re: revlimters...

Post by Scottyj »

just for reference i got a omex single coil and it was a piece of piss to fit, and works great..
Post Reply