Performance parts cat

[pistonpen paultje]

I think most of the F7p guys building one, want this, as the original F7p/r needs to be cut and welded...

[filthyjohn]

All the clio boys reckon the standard williams manifold is too restrictive for 160hp+, so a better option would be nice. Mine has cams now so I think I'm reaching the limits of my homemade crappy exhaust.

[stew]

sorry for whinging

[Chris_C]

Dai sometimes gets kept away from the forum for differing reasons, have you tried sending him a ring or a text? His no should be the first post, and he will always get back to you a lot quicker that way.

[stew]

**Edit** Seems I was being an impatient d1ck stuff arrived today

[classicswede]

Stew,

did you get my PM about UPS's balls up. Both your and Tom's order did not get collecting and I had to chase them twice before they eventualy turned up. They have been very reliable upto now. Glad everything has arrived with you ok now.

Regards

[stew]

I didn't mate that's the reason I was worried, no problem though.

While I have your attention there are 2 different lenght bolts in the sets I have is that normal and will all become apparent what goes where when I fit the blocks or are all 8 supposed to be the same lenght? Ta

[classicswede]

At one end of each side there is a 10 mm thick spreader plate. The longer bolts are to go through that end.

[mrsoundcraft]

Hi, whats the current situation with special improved topmounts?
Ive broken a thrust bearing and could be tempted to replace the whole lot, because the saxo VTS thing isnt going anywhere.

Sorry Just checked, thought these were still in R+D

[SteveP]

Just a quick one Dai, am I right in thinking you now sell adjustable fronts?

[volvosneverdie]

Just a quick one Dai, am I right in thinking you now sell adjustable fronts?

Think they're on eBay?
So I'm guessing yes.

[classicswede]

Hi, whats the current situation with special improved topmounts?
Ive broken a thrust bearing and could be tempted to replace the whole lot, because the saxo VTS thing isnt going anywhere.

Sorry Just checked, thought these were still in R+D

The top mounts are available but to order only. The big advantage of the ones that I make are the ride height can be kept low. Using nissan ones or others will lift the front end over 1"

[classicswede]

Just a quick one Dai, am I right in thinking you now sell adjustable fronts?

Think they're on eBay?
So I'm guessing yes.

The front inserts have been available for a month or so now. I can do them in the std height version for use for use with original or rally springs and I do the more common shortened version for use with lowering springs. The shortened version eliminates the need to clamp the spings to the cups.

[Auntie had several]

Dai, posted you a cheque weeks ago and heard/received nothing. Can you tell me what's going on? Tried to text but heard nothing either. Cheque was for 2" lowering blocks and 3" lowered front springs........Jonny

[Cutler]

same for me, send you the money (more than 450€) for a complete suspension upgrade and heard nothing since.

drop me a pm an let me know whats going on pls.

thanks.