Front axle, springs, shock absorbers, wheels, bearings, calipers, drums...NO parts requests here, please use our V3M BUY & SELL corner
Kyuss
Posts: 27 Joined: 22 Nov 2004 09:29 pmLocation: Brisbane, Australia
Post
by Kyuss 03 Feb 2005 10:32 am
I think the stud spacing is different, but can someone tell me if these:
http://cgi.ebay.com.au/ws/eBayISAPI.dll ... :B:WN:AU:1
will fit a 360?
'84/'85 Silver 360 GLT B200E / M47R
redline
*** V3M DONOR ***
Posts: 5432 Joined: 05 Oct 2004 10:18 amLocation: MILTON KEYNES , ENGLAND
Post
by redline 03 Feb 2005 10:57 am
as far as I remember its only the 400 series volvo alloys that fit , the s40 dos have a different stud pattern
Kyuss
Posts: 27 Joined: 22 Nov 2004 09:29 pmLocation: Brisbane, Australia
Post
by Kyuss 03 Feb 2005 11:14 am
poo...
'84/'85 Silver 360 GLT B200E / M47R
redline
*** V3M DONOR ***
Posts: 5432 Joined: 05 Oct 2004 10:18 amLocation: MILTON KEYNES , ENGLAND
Post
by redline 03 Feb 2005 11:28 am
you can also fit some vauxhall ,seat ,skoda and vw rims but be carefull , the stud pattern is 4X100 so mark 1 and 2 golf rims fit but not GTI ones
5lab
*** V3M DONOR ***
Posts: 3454 Joined: 31 Jan 2004 01:44 pmLocation: Brighton, UK
Contact:
Post
by 5lab 03 Feb 2005 03:26 pm
the spacing is 108 (iirc) rather than 100, so no it wont work
Siddy-'87 360 Glt lhd convertible
SteveP
*** V3M DONOR ***
Posts: 7943 Joined: 21 Sep 2004 12:45 pmLocation: Coventry, UK
Post
by SteveP 03 Feb 2005 03:52 pm
Yep Hugh's right... the 300 series 4x100 is a very common fitment though.
1989 - Volvo 360 GLT
foggyjames
*** V3M DONOR ***
Posts: 9361 Joined: 29 Jan 2004 04:20 amLocation: Nottingham, UK
Post
by foggyjames 05 Feb 2005 07:16 pm
All but the very last of the '40' rims look pants anyway - they must have thrown out the (tasteful) 400 series alloy design team and replaced them with blind folk!
